When commands are sent to the stack from a different core they can experience delays in execution.
This library detects this and invokes the esp32 IPC to reroute these commands through the correct core but this also increases overhead.
Therefore it is highly recommended to create tasks for BLE to run on the same core, the macro CONFIG_BT_NIMBLE_PINNED_TO_CORE can be used to set the core.
When a client instance has been created and has connected to a peer device and it has retrieved service/characteristic information it will store that data for the life of the client instance.
If you are periodically connecting to the same devices and you have deleted the client instance or the services when connecting again it will cause a retrieval of that information from the peer again.
This results in significant energy drain on the battery of the devices, fragments heap, and reduces connection performance.
Client instances in this library use approximately 20% of the original bluedroid library, deleting them will provide much less gain than it did before.
It is recommended to retain the client instance in cases where the time between connecting to the same device is less than 5 minutes.
As a client the use of NimBLEClient::getServices or NimBLERemoteService::getCharacteristics and using true for the parameter should be limited to devices that are not known.
Instead NimBLEClient::getService(NimBLEUUID) or NimBLERemoteService::getCharacteristic(NimBLEUUID) should be used to access certain attributes that are useful to the application.
This reduces energy consumed, heap allocated, connection time and improves overall efficiency.
Many user issues can be avoided by checking if a function returned successfully, by either testing for true/false such as when calling NimBLEClient::connect,
or nullptr such as when calling NimBLEClient::getService. The latter being a must, as calling a method on a nullptr will surely result in a crash.
Most of the functions in this library return something that should be checked before proceeding.
No code is bug free and unit testing will not find them all on it's own. If you encounter a bug, please report it along with any logs and decoded backtrace if applicable.
Best efforts will be made to correct any errors ASAP.
Bug reports can be made at https://github.com/h2zero/NimBLE-Arduino/issues or https://github.com/h2zero/esp-nimble-cpp/issues.
Questions and suggestions will be happily accepted there as well.