From 62cade43146d7164dcdc17a93fe11b367f4d29bd Mon Sep 17 00:00:00 2001 From: ihaveahax Date: Mon, 9 Dec 2024 01:42:53 -0600 Subject: [PATCH] New translations installing-boot9strap-(mset9-play-store).md (Croatian) --- ...nstalling-boot9strap-(mset9-play-store).md | 83 ++++++++++++------- 1 file changed, 52 insertions(+), 31 deletions(-) diff --git a/docs/hr_HR/installing-boot9strap-(mset9-play-store).md b/docs/hr_HR/installing-boot9strap-(mset9-play-store).md index 4f8367784851a..cec9e76f5c41d 100644 --- a/docs/hr_HR/installing-boot9strap-(mset9-play-store).md +++ b/docs/hr_HR/installing-boot9strap-(mset9-play-store).md @@ -34,19 +34,9 @@ On Android phones/tablets, the minimum Android version required is 6.0 (Marshmal In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger. -1. Power on your console **with your SD card inserted** +1. Insert your SD card into your phone/tablet/computer -2. Open Mii Maker - -3. Wait for your console to reach the "Welcome to Mii Maker" screen, then exit Mii Maker - - You may see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created - - If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step - -4. Power off your console - -5. Insert your SD card into your phone/tablet/computer - -6. Copy everything from the Release `.zip` to the root of your SD card, overwriting any existing files: +2. Copy everything from the Release `.zip` to the root of your SD card, overwriting any existing files: - Open ZArchiver - If prompted, [allow ZArchiver to access files on your SD card](/images/screenshots/mset9/zarchiver-allow.png) @@ -60,19 +50,51 @@ In this section, you will prepare the SD card data necessary for the MSET9 explo ::: -7. Run the [MSET9 Installer application](/images/screenshots/mset9/mset9-setup-android.png) +3. Run the [MSET9 Installer application](/images/screenshots/mset9/mset9-setup-android.png) + +4. Tap on `Select "Nintendo 3DS" Folder`, then navigate to your `Nintendo 3DS` folder on your SD card ([image](/images/screenshots/mset9/select-mset9-folder-1.png)) + +5. Once inside the `Nintendo 3DS` folder, tap on "Use this folder", then "Allow" if asked ([image](/images/screenshots/mset9/select-mset9-folder-2.png)) + +6. If `Setup MSET9` is [highlighted](/images/screenshots/mset9/setup-mset9-highlighted.png), proceed to the next step + - If you get an error, you need to resolve before you can use MSET9. Refer to the [troubleshooting](troubleshooting-mset9) + +7. Tap on `Setup MSET9` to begin the process of setting up MSET9 -8. Tap on `Select "Nintendo 3DS" Folder`, then navigate to your `Nintendo 3DS` folder on your SD card ([image](/images/screenshots/mset9/select-mset9-folder-1.png)) +8. After reviewing the disclaimer, tap on `Confirm` to accept it -9. Once inside the `Nintendo 3DS` folder, tap on "Use this folder", then "Allow" if asked ([image](/images/screenshots/mset9/select-mset9-folder-2.png)) +9. Tap on the photo corresponding to your console model, then at the bottom, pick your current firmware version -10. If "Setup MSET9" is [highlighted](/images/screenshots/mset9/setup-mset9-highlighted.png), proceed to the next step. **Do not setup MSET9 yet.** Close the MSET9 Installer for now - - If "Check Again" is highlighted, there is a problem that you need to resolve before you can use MSET9. Refer to the [troubleshooting](troubleshooting-mset9) +10. If you see the prompt of `Hax ID1 Created`, tap OK to continue + - If you get an error, check the [troubleshooting](troubleshooting-mset9), then try again + - Your 3DS will appear to lose most data / no user-installed apps on HOME Menu. This is expected. Your data will come back at a later step 11. Reinsert your SD card into your console 12. Power on your console +13. Open Mii Maker + +14. Wait for your console to reach the "Welcome to Mii Maker" screen, then exit Mii Maker + - You may see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created + - If you just reach the normal Mii Maker screen, exit Mii Maker and return to the HOME Menu + +15. Launch System Settings and navigate to `Data Management` -> `Nintendo 3DS` -> `Software` -> Reset ([image](/images/screenshots/database-reset.jpg)) + - This will not wipe any of your data + +16. Power off your console by pressing the power button then tapping Power Off on the lower screen + +17. Insert your SD card into your phone/tablet/computer + +18. The MSET9 Installer application should automatically check if you have done previous steps properly + - It may take a few seconds for the app to detect the SD card and react + - If it doesn't check automatically, tap `Check MSET9 status` to check manually + - If you get an error, check the [troubleshooting](troubleshooting-mset9), then try again + +19. If the check passed, you'll see `Inject trigger file` become [highlighted](/images/screenshots/mset9/inject-trigger-highlighted.png) and you can continue to the next step. **Do not inject trigger yet.** Put your phone/tablet/computer aside for now + +20. Reinsert your SD card into your console + ### Section II - MSET9 In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer). @@ -83,20 +105,19 @@ These instructions must be followed **EXACTLY**, so double-check EVERYTHING you ::: -1. **[Hover over](/images/screenshots/mset9/hover-settings.png)** the System Settings icon using the D-Pad (do not select it yet) -2. Power off, then power on your console -3. Press (A) to launch System Settings -4. Navigate to `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([image](/images/screenshots/mset9/settings-extdata.png)) -5. **Do not press any buttons or touch the screen** -6. **With the console STILL ON, and without pressing any buttons or touching the screen**, remove your SD card from your console +1. Power on your console, ensuring System Settings is selected + - If System Settings is not selected, **[hover over](/images/screenshots/mset9/hover-settings.png)** the System Settings icon using the D-Pad, power your console off, then back on +2. Press (A) to launch System Settings +3. Navigate to `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([image](/images/screenshots/mset9/settings-extdata.png)) +4. **Do not press any buttons or touch the screen** +5. **With the console STILL ON, and without pressing any buttons or touching the screen**, remove your SD card from your console - The menu will refresh and say that no SD card is inserted, which is expected -7. Insert your SD card into your phone/tablet/computer -8. Open the MSET9 Installer application -9. Tap "Setup MSET9" -10. Tap on the photo corresponding to your console model, then on the button corresponding to your current firmware version - - If the injection was successful, all buttons should become grayed out except for "Remove MSET9" -11. Reinsert your SD card into your console **without pressing any buttons or touching the screen** -12. If the exploit was successful, you will have booted into SafeB9SInstaller +6. Insert your SD card into your phone/tablet/computer +7. Open the MSET9 Installer application +8. Tap `Inject trigger file` + - The button should become greyed out and `Remove trigger file` become [highlighted](/images/screenshots/mset9/remove-trigger-highlighted.png) +9. Reinsert your SD card into your console **without pressing any buttons or touching the screen** +10. If the exploit was successful, you will have booted into SafeB9SInstaller - If you get a red screen or the console gets stuck on a loading screen, follow the [troubleshooting guide](troubleshooting-mset9) ### Section III - Installing boot9strap @@ -122,7 +143,7 @@ Do NOT skip this section! If you skip it, applications may crash unexpectedly an 1. Power off your console 2. Insert your SD card into your phone/tablet/computer 3. Open the MSET9 Installer application -4. Tap "Remove MSET9" +4. Tap `Remove MSET9` 5. Close the MSET9 Installer application