[Feature Request] 2 features

[hupka36]

Hi, Can you pls add these 2 features:

1. in config make a choice if will be artificial horizon grey / solid black (Im using BW LCD on taranis and grey is not so good visible)

2. ILS (I mean that localiser is needed / glide slope si not needed / beacons optionaly if you wish)
   Example to solution
   airplane will be powered up to start gps locating and sending telemetry

place airplane to begin of runway
in config menu of lua telemetry select item "store begin of runway" (to store gps1)
place airplane to end of runway
in config menu select item "store end of runway" (to store gps2)

and fly

lua can calculate runway axis from gps1,gps2 and also
devaition runway axis to airplane gps position
on LCD will be visible as localiser or -+ deviation in meters

maybe it can be better explained from video
https://www.youtube.com/watch?v=Ra0XAPxuzdY

Thank YOU so much
WBR .s.

BTW. congratulation - this is very nice app. thanks

---

PS:

Glide slope is by me irrelevant due to defferent landing curve of any models according to weight of planes, trees on begin of runway and skill of airplane to loss some speed before fall. Special kind are JETs but as you wish (so i thing that only take memory without effect)

beacon can make sounds in case landing ( airplane have heading to runway -+ XX degrees and devaiation from axis is less then YY meters - better to have choice in config because both is affected by windy from side)
and how about beacons distance with different sounds ??? Also configurable ???

pls take the direction into account. You can define runway from left to right, but you can land from both sides.
it mean that localiser dont have problem, but heading for beacon signal can be little bit complicated.