jambonz

jambonz is an open-source CPaaS (Communication Platform as a Service) specifically designed for Communication Service Providers.

To add this Helm chart repository to your Helm client:

helm repo add jambonz https://jambonz.github.io/helm-charts/

Having installed it, you can list its charts, of which there is just one:

$ helm search repo jambonz
NAME           	CHART VERSION	APP VERSION	DESCRIPTION
jambonz/jambonz	0.1.24       	0.8.1      	open source CPaaS for communication service pro...

Introduction

This chart bootstraps a jambonz deployment on a Kubernetes cluster using the Helm package manager.

Special requirements for the Kubernetes cluster

You will need to have at least one (two are recommended) special node pools created in the Kubernetes cluster where the SIP and RTP processing components of the jambonz SBC will run. The reason for this is that there are currently no Kubernetes ingress controllers that are capable of managing SIP traffic.

Two node pools are recommended so that the SIP processing can be handled in one, and RTP in the other. For a production cluster it is desirable to allow the RTP processing nodes to scale independently of the SIP processing, because if we are continually adding or removing SIP processing nodes we will need to be updating our carriers with those addresses as they are added or removed. Since the RTP processing is more computationally expensive than SIP, it is best to allow the RTP to scale independently, and this requires it to be in its own node pool.

Suffice it to say that two node pools are recommended to be created in addition to the default node pool, but this chart does allow you to deploy SIP and RTP elements into single node pool if desired.

SIP Node Pool configuration

Create the node pool for sip with the following labels and taints:

label: voip-environment=sip
taint: sip=true

Note: if you choose to use a different label or taint, update the associated global values in the values.yaml file accordingly

Associate a firewall rule with this node pool allowing traffic into instances in this node pool as follows:

5060/udp
5060/tcp
5061/tls
8443/tcp

RTP Node Pool configuration

Create the node pool for rtp with the following labels and taints:

label: voip-environment=rtp
taint: rtp=true

Note: as above, if you choose to use a different label or taint, update the associated global values in the values.yaml file accordingly

Associate a firewall rule with this node pool allowing traffic into instances in this node pool as follows:

40000-60000/udp

Note: if you want to create a single additional node pool rather than two, update the global values in the values.yaml to reference the label and taint in the single node pool, and open all of the ports above.

Sub-charts

The database (redis+mysql) and monitoring (grafana+influxdb+telegraf+homer) components of jambonz are provided as sub-charts, which allow them to be installed as standalone charts if nececessary.

Namespaces

By default, since 0.1.26 of this helm chart, everything is installed into a single namespace. However, you can optionally install the components into three different namespaces if you like, e.g.:

db: for the database workloads
monitoring: for the monitoring workloads
jambonz: for the core jambonz call, media, and api processing.

If you don't want to install everything into a single namespace, then set the global.db.namespace and global.monitoring.namespace in values.yaml to the namespaces that you want to use for these sub-charts, and also set global.db.createNamespace and global.monitoring.createNamespace to true.

Installing the chart

Here is example of installing the main chart as well as the db and monitoring sub-charts into a single namespace named 'jambonz'. The FQDNs for the ingress controllers created for the web portal, the API, the grafana and homer portals are also provided on the command line.

The cloud provider where the Kubernetes cluster is running (google, in this case) is also provided as a command line argument. (This is needed to properly configure the drachtio SIP element)

 helm install --namespace=jambonz \
 --generate-name --create-namespace \
 --set "monitoring.grafana.hostname=grafana.example.com" \
 --set "monitoring.homer.hostname=homer.example.com" \
--set "webapp.hostname=portal.example.com" \
--set "api.hostname=api.example.com" \
--set cloud=gcp \
jambonz/jambonz

Note that all of the above command line values are required variables.

And here is an example of installing into 3 different namespaces:

helm install --namespace=jambonz \
--generate-name --create-namespace \
--set "global.db.createNamespace=true" \
--set "global.db.namespace=db" \
--set "global.monitoring.createNamespace=true" \
--set "global.monitoring.namespace=monitoring" \
--set "monitoring.grafana.hostname=grafana.example.com" \
--set "monitoring.homer.hostname=homer.example.com" \
--set "webapp.hostname=portal.example.com" \
--set "api.hostname=api.example.com" \
--set cloud=gcp \
jambonz/jambonz

Once you have installed the helm chart for the first, it will take a bit for all components to be downloaded, installed and transition to the running state. This is because the mysql database schema will be created and seeded with initial data, any many of the Pods will wait for the database to become available (via an initContainer) before starting their containers.

Once the system is up and running, you will want to query the 4 ingress controllers to view the the IP addresses that have been assigned.

$ kubectl -n jambonz get ingress
NAME         CLASS    HOSTS                ADDRESS          PORTS   AGE
api-server   <none>   api.example.com      34.117.50.187    80      6m3s
webapp       <none>   portal.example.com   34.102.246.186   80      6m3s

$ kubectl -n monitoring  get ingress
NAME           CLASS    HOSTS                 ADDRESS         PORTS   AGE
grafana        <none>   grafana.example.com   35.201.68.117   80      6m10s
homer-webapp   <none>   homer.example.com     35.241.2.62     80      6m10s

Once you have done this you will want to create associated the DNS records in your DNS provider so that you can access these portals.

Jaeger (opentelemetry)

By default, open telemetry spans are stored in cassandra and jaeger-collector and jaeger-query are used to save and retrieve the spans, respectively. If you prefer to run a simpler jaeger-all-in-one deployment with spans stored in memory, set global.cassandra.enabled to false. Please note that if you do so historical spans will be lost every time you restart jaeger.

Using Kong API Gateway

Run:

helm repo add kong https://charts.konghq.com
helm install kong kong/kong -n <namespace> --set ingressController.installCRDs=false

Check pod status, and make sure the kong-kong-{ID} pod is running:

kubectl get pods -n <namespace> | grep kong

Update values.yaml

  kong:
    enabled: true
    useHostnames: true

Set enabled to true to use Kong.

useHostnames set to true will use the hostnames already created for the different services. Either create a wildcard for your hostnames

useHostnames set to false will us the Kong IP address with prefixes.

<IP>/api
<IP>/webapp
<IP>/grafana
<IP>/homer

Enable Call Recording

There are two ways to record calls, and they can be simultaneously enabled or disabled.

From the portal, you can enable call recordings and listen to the recordings. Recordings are saved to an AWS S3 bucket and this must be enabled at the account level for every account that wishes to record calls. You may record all calls for the account, or only record calls for specified applications. This is intended to be a user-facing record option where the user is providing their own AWS S3 bucket and credentials for storage.
You can use rtpengine to globally record all calls handled by the system.

Call recording in the portal

By default, call recording in the portal is enabled. To disable it, set webapp.disableRecording to true.

rtpengine recording

To enable the recording of calls, we need an image of jambonz/rtpengine with the libpcap-dev package installed.

Generate a new image

If none is available, then create one with a Dockerfile like so:

FROM jambonz/rtpengine:0.1.3 as base

RUN touch /var/lib/dpkg/status
RUN mkdir /var/lib/dpkg/updates
RUN mkdir /var/lib/dpkg/info
RUN apt-get update
RUN apt-get --assume-yes install libpcap-dev

Configurations

The following parameters are available to configure:

Name	Description	Default Value
global.recordings.enabled	Enable the recordings on rtpengine	`false`
rtpengine.recordings.pvc	PVC for the recordings	`recordings-shared-volume`
rtpengine.recordings.dir	Mounted Directory in the pod for storing the recordings	`/recordings`
rtpengine.recordings.method	Method for recording	`pcap`

Update values.yaml and set global.recordings.enabled to true to use the recordings. Ensure that the PVC is in the same namespace as the jambonz-sbc-rtp (defaults to jambonz).

global:
  recordings:
    enabled: true

rtpengine:
  image: # change the image of rtpengine to use one with the libpcap-dev package

Uninstalling the chart

helm uninstall -n <namespace> <release-name>

Parameters

Global parameters

Name	Description	Value
dbNamespace	namespace where db components will be installed; if not provided these components will be installed into the Release namespace	""
monitoringNamespace	namespace where monitoring components will be installed; if not provided these components will be installed into the Release namespace	""

Other parameters

Name	Description	Value
db.enabled	if true, install the db sub-chart	true
db.affinity	set the affinity structure for the db subchart resources
db.storageClassName	set the `storageClassName` for the db subchart StatefulSet resources
db.mysql.nodeSelector.label	optional Node Selector Label for mysql and db-create
db.mysql.nodeSelector.value	optional Node Selector Value for mysql and db-create
db.redis.nodeSelector.label	optional Node Selector Label for redis
db.redis.nodeSelector.value	optional Node Selector Value for redis
monitoring.enabled	if true, install the monitoring sub-chart	true
monitoring.affinity	set the affinity structure for the monitoring subchart resources
monitoring.storageClassName	set the `storageClassName` for the monitoring subchart StatefulSet resources
global.affinity	set the affinity structure for the base chart resources
global.recordings.enabled	Enable call audio recordings on SBC-RTP	`false`
cloud	(required) name of cloud provider, must be one of azure, aws, digitalocean, gcp, or none	""
jambonz.clusterId	a short identifier for the cluster	""
sbc.sip.nodeSelector.label	label name used to select sip node pool	"voip-environment"
sbc.sip.nodeSelector.value	label value used to select sip node pool	"sip"
sbc.sip.toleration	taint assigned to sip node pool	"sip"
sbc.rtp.nodeSelector.label	label name used to select sip node pool	"voip-environment"
sbc.rtp.nodeSelector.value	label value used to select sip node pool	"rtp"
sbc.rtp.toleration	taint assigned to sip node pool	"rtp"
sbc.rtp.storageClassName	set the `storageClassName` for the SBC-RTP StatefulSet
sbc.rtp.serviceAccountName	service account name to be used	""
sbc.rtp.extraInitContainers	list of initContainers to add to the sbc-rtp definition of initContainers
sbc.rtp.extraContainers	list of sidecars to add to the sbc-rtp definition of containers
sbc.rtp.extraVolumes	list of volumes to add to the sbc-rtp definition of volumes
sbc.rtp.statefulset.enabled	use a StatefulSet instead of DaemonSet for the sbc-rtp	`false`
sbc.rtp.statefulset.replicas	number of replicas for the StatefulSet	`1`
sbcCallRouter.nodeSelector.label	optional Node Selector Label for sbc-call-router
sbcCallRouter.nodeSelector.value	optional Node Selector Value for sbc-call-router
sbcInbound.nodeSelector.label	optional Node Selector Label for sbc-inbound
sbcInbound.nodeSelector.value	optional Node Selector Value for sbc-inbound
sbcOutbound.nodeSelector.label	optional Node Selector Label for sbc-outbound
sbcOutbound.nodeSelector.value	optional Node Selector Value for sbc-outbound
stats.enabled	if set, jambonz apps write stats to telegraf	"1"
stats.host	telegraf service name	"telegraf"
stats.port	telegraf service listening port	"8125"
stats.protocol	stats protocol	"tcp"
stats.sampleRate	stats sample rate	"1"
rtpengine.image	image for rtpengine rtp media proxy	jambonz/rtpengine:latest
rtpengine.imagePullPolicy	rtpengine image pull policy	"Always"
rtpengine.sidecarImage	image for rtpengine sidecar container	jambonz/rtpengine-sidecar:latest
rtpengine.sidecarImagePullPolicy	rtpengine sidecar image pull policy	"Always"
rtpengine.dtmfLogPort	udp port that rtpengine sends dtmf events to	"22223"
rtpengine.logLevel	rtpengine log level (1-7)	"5"
rtpengine.homerId	id to apply to HEP traffic sent to homer from rtpengine	"11"
rtpengine.recordings.pvc	PVC for the recordings	`recordings-shared-volume`
rtpengine.recordings.dir	Mounted Directory in the pod for storing the recordings	`/recordings`
rtpengine.recordings.method	Method for recording	`pcap`
rtpengine.recordings.storage	Amount of storage for the recordings volume	`10Gi`
drachtio.image	drachtio image	drachtio/drachtio-server:latest
drachtio.imagePullPolicy	drachtio image pull policy	"Always"
drachtio.host	host of drachtio server	"127.0.0.1"
drachtio.port	port to connect to drachtio server	"9022"
drachtio.homerId	id to apply to HEP traffic sent to homer from drachtio	"10"
freeswitch.image	freeswitch image	drachtio/drachtio-freeswitch-mrf:latest
freeswitch.imagePullPolicy	freeswitch image pull policy	"Always"
mysql.image	mysql image	mysql:5.7
mysql.host	mysql service name	"mysql"
mysql.database	jambonz database	"jambones"
mysql.user	mysql user	"jambones"
mysql.storage	amount of storage to allocate for mysql database	"10Gi"
mysql.rootSecret	if set, use it for the root password
monitoring.postgres.user	postgres user as base64	"cm9vdA=="
monitoring.postgres.secret	postgres password as base64	"aG9tZXJTZXZlbg=="
redis.image	redis image	redis:alpine
redis.host	redis service name	"redis"
redis.port	redis listening port	"6379"
api.image	jambonz-api-server image	jambonz/jambonz-api-server:latest
api.imagePullPolicy	jambonz-api-server image pull policy	"Always"
api.httpPort	http port to listen on	"3000"
api.hostname	(required) FQDN for api ingress controller	""
api.nodeSelector.label	optional Node Selector Label for api-server
api.nodeSelector.value	optional Node Selector Value for api-server
apiban.nodeSelector.label	optional Node Selector Label for apiban
apiban.nodeSelector.value	optional Node Selector Value for apiban
webapp.image	jambonz webapp image	jambonz/webapp:latest
webapp.imagePullPolicy	jambonz webapp image pull policy	"Always"
webapp.hostname	(required ) FQDN for webapp ingress controller	""
webapp.nodeSelector.label	optional Node Selector Label for webapp
webapp.nodeSelector.value	optional Node Selector Value for webapp
sbcInbound.image	sbc-inbound image	jambonz/sbc-inbound:latest
sbcInbound.imagePullPolicy	sbc-inbound image pull policy	"Always"
sbcOutbound.drachtioPort	port to listen on for outbound connections from drachtio	"4000"
sbcOutbound.image	sbc-outbound image	jambonz/sbc-outbound:latest
sbcOutbound.imagePullPolicy	sbc-outbound image pull policy	"Always"
sbcOutbound.drachtioPort	port to listen on for outbound connections from drachtio	"4000"
sbcSipSidecar.image	sbc-sip-sidecar image	jambonz/sbc-sip-sidecar:latest
sbcSipSidecar.imagePullPolicy	sbc-sip-sidecar image pull policy	"Always"
sbcCallRouter.image	sbc-call-router image	jambonz/sbc-call-router:latest
sbcCallRouter.imagePullPolicy	sbc-call-router image pull policy	"Always"
sbcCallRouter.drachtioPort	port to listen on for http connections from drachtio	"3000"
featureServer.image	feature-server image	jambonz/feature-server:latest
featureServer.imagePullPolicy	feature-server image pull policy	"Always"
featureServer.httpPort	port to listen on for api requests	"3000"
featureServer.nodeSelector.label	optional Node Selector Label for feature-server
featureServer.nodeSelector.value	optional Node Selector Value for feature-server
featureServer.drachtio.loglevel	drachtio loglevel for drachtio container in feature-server deployment, should be info or debug (can also be notice, warning, error)	"info"
featureServer.drachtio.sofiaLoglevel	sofia-sip log level for drachtio container in feature-server deployment, should be 1-9 (can also be 0)	"3"
feature.drachtioConnection	drachtio connection information	"localhost:9022:cymru"
feature.freeswitchConnection	freeswitch connection information	"localhost:8021:JambonzR0ck$"
sbcSip.loglevel	drachtio loglevel in sbc sip container, should be info or debug (can also be notice, warning, error)	"info"
sbcSip.sofiaLogLevel	sofia-sip log level for drachtio in sbc sip container, should be 1-9 (can also be 0)	"3
dbWaiter.image	image of sidecar mysql client app to use for testing database readiness	d3fk/kubectl:v1.18

Configuring jambonz to use sip over websockets

Prerequisites

You need to have an Certificate Issuer installed on your kubernetes cluster. If you don't, you can install cert-manager which allows you to obtain and renew automatically valid Let's Encrypt certificates.

Request Certificate

To obtain certificates, you just need to create resources of type Certificate in the namespace of your choice

    apiVersion: cert-manager.io/v1
    kind: Certificate
    metadata:
      name: drachtio-certificate
      namespace: jambonz
    spec:
      # Secret names are always required.
      secretName: drachtio-certs
      duration: 2160h # 90d
      renewBefore: 360h # 15d
      usages:
        - server auth
        - client auth
      # At least one of a DNS Name, URI, or IP address is required.
      dnsNames:
        - example.com # Change this with your domain name
        - www.example.com # Change this with your domain name
      issuerRef:
        name: ca-issuer # name of your issuer as defined at step 1
        kind: Issuer #or ClusterIssuer

As soon as you apply this CRD, you will have a new CertificateRequest created and a secret (drachtio-certs) created in jambonz namespace.

Use your certs

To use the created certificates on drachtio server, set the config sbc.sip.ssl.enabled to true:

sbc:
  sip:
    ssl:
      enabled: true

This will cause drachtio to add a listener for sip over wss on port 8443 and use the provided TLS certificate and key to authenticate requests.

Note: you must be running drachtio server version 0.8.17-rc1 or later for support of the WSS_SIP env variable.

Multi-Zone

A multi-zone deployment of jambonz is possible, but some changes need to be made in order to support that.

Change the default Storage Class

If your default Storage Class doesn't support a multi-zone claim by default (like it doesn't have the volumeBindingMode: WaitForFirstConsumer property), or you need to change it to other one, set the storageClassName value accordingly:

db:
  storageClassName: "regional-storage-class"

monitoring:
  storageClassName: "another-regional-storage-class"

Affinity

The Affinity is a kubernetes feature that expands the nodeSelector capabilities. To configure a jambonz cluster to be deployed to a set of zones, configure the affinity like so:

global:
  affinity:
    nodeAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        nodeSelectorTerms:
          - matchExpressions:
            - key: topology.kubernetes.io/zone
              operator: In
              values:
              - europe-west1-b
              - europe-west1-c

The db and monitoring subcharts have both a separated affinity value that can be set:

db:
  affinity:
    nodeAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        nodeSelectorTerms:
          - matchExpressions:
            - key: topology.kubernetes.io/zone
              operator: In
              values:
              - europe-west1-b

monitoring:
  affinity:
    nodeAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        nodeSelectorTerms:
          - matchExpressions:
            - key: topology.kubernetes.io/zone
              operator: In
              values:
              - europe-west1-d

Add extra containers or volumes to the SBC-RTP

It may be required to do some processing on the data produced by the RTP service, like the recordings. For these scenarios, another container needs to run along the rtp and share a volume or a secret. Add the following configurations to your yaml file like you would populate a kubernetes deployment:

sbc:
  rtp:
    #nodeSelector: 
    #  label: rtp
    #  value: "true"
    #toleration: rtp
    extraInitContainers:
    - name: init-processor
      image: my-service/init-processor:v1.0.0
    extraContainers:
    - name: recordings-processor
      env:
      - name: SERVER_PORT
        value: "8080"
      - name: GOOGLE_APPLICATION_CREDENTIALS
        value: /app/secrets/gcp.serviceaccount.json
      image: my-service/recordings-processor:v2.0.0
      ports:
      - containerPort: 8080
        hostPort: 8080
        protocol: TCP
      resources:
        requests:
          cpu: 50m
          memory: 300Mi
      volumeMounts:
      - mountPath: /app/secrets
        mountPropagation: None
        name: secrets-gcp
        readOnly: true
      - mountPath: /usr/src/app/cache
        mountPropagation: None
        name: cache
      - mountPath: /recordings # if enabled with global.recordings.enabled
        name: recordings
    - name: another-processor
      image: my-service/another-processor:v3.0.0
    extraVolumes:
    - name: secrets-gcp
      secret:
        defaultMode: 420
        optional: false
        secretName: gcp-secret
    - emptyDir: {}
      name: cache

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

jambonz

Introduction

Special requirements for the Kubernetes cluster

SIP Node Pool configuration

RTP Node Pool configuration

Sub-charts

Namespaces

Installing the chart

Jaeger (opentelemetry)

Using Kong API Gateway

Enable Call Recording

Call recording in the portal

rtpengine recording

Generate a new image

Configurations

Uninstalling the chart

Parameters

Global parameters

Other parameters

Configuring jambonz to use sip over websockets

Prerequisites

Request Certificate

Use your certs

Multi-Zone

Change the default Storage Class

Affinity

Add extra containers or volumes to the SBC-RTP

Files

README.md

Latest commit

History

README.md

File metadata and controls

jambonz

Introduction

Special requirements for the Kubernetes cluster

SIP Node Pool configuration

RTP Node Pool configuration

Sub-charts

Namespaces

Installing the chart

Jaeger (opentelemetry)

Using Kong API Gateway

Enable Call Recording

Call recording in the portal

rtpengine recording

Generate a new image

Configurations

Uninstalling the chart

Parameters

Global parameters

Other parameters

Configuring jambonz to use sip over websockets

Prerequisites

Request Certificate

Use your certs

Multi-Zone

Change the default Storage Class

Affinity

Add extra containers or volumes to the SBC-RTP