Question about snat-subnet-routes and static route

[adrianmihalko]

Hi,

I would have two questions:

1. Until now on my rPi I used snat-subnet-routes=false config, based on the article from Tailscale:
   https://tailscale.com/kb/1214/site-to-site/

This command is not available on EdgeOS version? Or it is disabled by default?

When I ping a remote network device I see original ip address:

1.54 (SiteA node) -> 2.1 (edgerouter with tailscale running) -> 2.51 [ping coming from 1.54]

Exactly like when snat-subnet-routes is set to false

2. My second question is, do I have static routes set right?

To access remote network subnet (1.0/24 and tailscale subnet 100.64.0.0/10) from any device on my local network I had to set some NAT rules and masquerade & set static routes pointing to tailscale0 ip address. It is not possible to select instead of tailscale0 ip address the interface itself? Or the IP is not changing at all for tailscale?