Add central boiler control and more ...

[jmcollin78]

What's Changed 🎉

• Add central boiler control by @jmcollin78 in Feature 234 add central boiler helper #352
• Specify window action on window open detection - Issue [Enhancement]: specify hvac_mode to use when window open is detected. #255 - Thanks to @Abyssmal
• Only modify _last_regulation_change if new regulation is sent to thermostats by @ikoz in Only modify _last_regulation_change if new regulation is sent to thermostats #351
• Add the possibility to disable the safety mode on outdoor temperature sensor failure - Issue Add the possibility to disable the safety mode on outdoor temperature sensor failure #343
• FIX Shelly TRV (thermostat over valve) - no change in valve position when opening window #341 - when window state change, open_valve_percent should be resend - thanks to @nurunet

New Contributors 👍

• @ikoz made their first contribution in Only modify _last_regulation_change if new regulation is sent to thermostats #351

Full Changelog: 5.2.2...5.3.3

Special thanks to garywg which helps to test the central boiler feature in real conditions and gives some extra feedback !

---

This discussion was created from the release Add central boiler control and more ....

[scaytrase]

Hello! Is it possible (or planned) to attach vtherms not to single central unit but for different ones?

In my case I have signle boiler which operates on it own, since it also provides hot tap water. But for the floor heating I have several pumps (one per floor). Each pump supplies several rooms with vtherms over switches (controlling 220v valves). So in my case I need to turn on\off relevant pump if any\none of rooms is demanding heating.

[jmcollin78]

Hello @scaytrase ,

No it is not possible now and will certainly be not developed because developed in the central configuration component which is alone by construction.