why does my e-book stop at the ‘flashing language chip’ screen

[smkj312]

"Hello, first of all, thank you for your efforts! [I haven’t made a PCB board yet, it’s built with discrete components. esp32-s3-wroom-1 n16r8. Now why does my e-book stop at the ‘flashing language chip’ screen, the circuit has been checked and there is no problem. The TF card has also copied the ‘babel.bin’ file. The file system of the TF card is FAT32,Thank you again!

[smkj312]

I tried changing gpio35, 36, and 37 to other non-psrom spi ports, but still failed, and the screen still stuck on burning the babel.bin file.

[smkj312]

In addition, I bought a new ESP32 S3 WROOM-IU MCN8 controller, but it still stops at the copy babel file screen.