spa.yaml

esphome:
  name: spa
  includes:
    - spa_reader.h

  libraries:
    - rlogiacco/CircularBuffer

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

uart:
  id: spa_uart_bus
  tx_pin: GPIO17
  rx_pin: GPIO16
  data_bits: 8
  parity: NONE
  stop_bits: 1
  baud_rate: 115200
  rx_buffer_size: 128
#  debug:
#    direction: RX
#    dummy_receiver: true

sensor:
- platform: custom
  lambda: |-
    auto spareader = new SpaReader(id(spa_uart_bus));
    App.register_component(spareader);
    return {spareader->temp_sensor,spareader->target_temp_sensor,spareader->jet1_sensor,spareader->jet2_sensor,spareader->blower_sensor,spareader->light_sensor,spareader->restmode_sensor,spareader->highrange_sensor,spareader->hour_sensor,spareader->minute_sensor};

  sensors:
  - name: "Current Temp"
    unit_of_measurement: °F
    accuracy_decimals: 2
  - name: "Target Temp"
    unit_of_measurement: °F
    accuracy_decimals: 2
  - name: "Jet1"
  - name: "Jet2"
  - name: "Blower"
  - name: "Light"
  - name: "Rest Mode"
  - name: "High Range"
  - name: "Hour"
  - name: "Minute"
# Enable Home Assistant API
api:
  encryption:
    key: !secret api_enc_key

ota:
  password: !secret ota_pw

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Spa Fallback Hotspot"
    password: !secret ap_fallback_pw

captive_portal: