-
Notifications
You must be signed in to change notification settings - Fork 0
/
stealthburner_leds.cfg
216 lines (191 loc) · 7.52 KB
/
stealthburner_leds.cfg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
# Macros for setting the status leds on the Voron StealthBurner toolhead (or for any neopixel-type leds).
#
# You will need to configure a neopixel (or other addressable led, such as dotstar). See
# https://www.klipper3d.org/Config_Reference.html#neopixel for configuration details.
#
# CONFIGURATION
#
[neopixel sb_leds]
pin: PB0
# # The pin connected to the neopixel. This parameter must be
# # provided.
chain_count: 3
# # The number of Neopixel chips that are "daisy chained" to the
# # provided pin. The default is 1 (which indicates only a single
# # Neopixel is connected to the pin).
color_order: GRBW
# # Set the pixel order required by the LED hardware. Options are GRB,
# # RGB, GRBW, or RGBW. The default is GRB.
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
initial_WHITE: 0.0
# Example neopixel configuration:
# # Sets the initial LED color of the Neopixel. Each value should be
# # between 0.0 and 1.0. The WHITE option is only available on RGBW
# # LEDs. The default for each color is 0.#
#
# Most configuration for the macros can be done by modifying the variables in the _sb_vars macro
# at the start of this file.
#
# MACROS
#
# The following status macros are available:
# STATUS_READY
# STATUS_OFF
# STATUS_BUSY
# STATUS_HEATING
# STATUS_LEVELING
# STATUS_HOMING
# STATUS_CLEANING
# STATUS_MESHING
# STATUS_CALIBRATING_Z
# With additional macros for direct control:
# SET_NOZZLE_LEDS_ON
# SET_LOGO_LEDS_OFF
# SET_NOZZLE_LEDS_OFF
#
# Contributed by Voron discord users wile.e, Tetsunosuke, and etherwalker
[gcode_macro _sb_vars]
# User settings for the StealthBurner status leds. You can change the status colors and led
# configurations for the logo and nozzle here.
variable_colors: {
'logo': { # Colors for logo states
'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
'heating': {'r': 0.3, 'g': 0.18, 'b': 0.0, 'w': 0.0},
'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'printing': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'standby': {'r': 0.00, 'g': 0.00, 'b': 1.0, 'w': 0.0},
},
'nozzle': { # Colors for nozzle states
'heating': {'r': 0.8, 'g': 0.35, 'b': 0.0, 'w':0.0},
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
'standby': {'r': 0.0, 'g': 0.0, 'b': 0.6, 'w':0.0},
},
'thermal': {
'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
}
}
variable_logo_led_name: "sb_leds"
# The name of the addressable LED chain that contains the logo LED(s)
variable_logo_idx: "1"
# A comma-separated list of indexes LEDs in the logo
variable_nozzle_led_name: "sb_leds"
# The name of the addressable LED chain that contains the nozzle LED(s). This will
# typically be the same LED chain as the logo.
variable_nozzle_idx: "2,3"
# A comma-separated list of indexes of LEDs in the nozzle
variable_thermal_config: {
'extruder': {
'cool_temp': 40,
'leds': 'logo',
},
'heater_bed': {
'cool_temp': 40,
'leds': 'nozzle',
},
}
# temperatures at which cooling will be considered complete
gcode:
; Do nothing
[gcode_macro _set_sb_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = params.LED|string %}
{% set idx = (params.IDX|string).split(',') %}
{% set transmit_last = params.TRANSMIT|default(1) %}
{% for led_index in idx %}
{% set transmit=transmit_last if loop.last else 0 %}
set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
{% endfor %}
[gcode_macro _set_sb_leds_by_name]
gcode:
{% set leds_name = params.LEDS %}
{% set color_name = params.COLOR %}
{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
{% set transmit = params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}
[gcode_macro _set_logo_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
[gcode_macro _set_nozzle_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
[gcode_macro set_logo_leds_off]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}
[gcode_macro set_nozzle_leds_on]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}
[gcode_macro set_nozzle_leds_off]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}
[gcode_macro status_off]
gcode:
set_logo_leds_off transmit=0
set_nozzle_leds_off
[gcode_macro status_ready]
gcode:
_set_sb_leds_by_name leds="logo" color="standby" transmit=0
_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1
[gcode_macro status_busy]
gcode:
_set_sb_leds_by_name leds="logo" color="busy" transmit=0
set_nozzle_leds_on
[gcode_macro status_heating]
gcode:
_set_sb_leds_by_name leds="logo" color="heating" transmit=0
_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1
[gcode_macro status_leveling]
gcode:
_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
set_nozzle_leds_on
[gcode_macro status_homing]
gcode:
_set_sb_leds_by_name leds="logo" color="homing" transmit=0
set_nozzle_leds_on
[gcode_macro status_cleaning]
gcode:
_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
set_nozzle_leds_on
[gcode_macro status_meshing]
gcode:
_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
set_nozzle_leds_on
[gcode_macro status_calibrating_z]
gcode:
_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
set_nozzle_leds_on
[gcode_macro status_printing]
gcode:
_set_sb_leds_by_name leds="logo" color="printing" transmit=0
set_nozzle_leds_on