diff --git a/Example_README.md b/Example_readme.md
similarity index 88%
rename from Example_README.md
rename to Example_readme.md
index e73a7b19..9996519f 100644
--- a/Example_README.md
+++ b/Example_readme.md
@@ -11,7 +11,12 @@ Provide a short description of your template and use case here. Try to keep it t
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/{your_template_dir}/{your_template_file}
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/{your_template_dir}/{your_template_file}
diff --git a/InfluxDBv2_Covid19_SouthAmerica/readme.md b/InfluxDBv2_Covid19_SouthAmerica/readme.md
index 3137a33c..0d380ecc 100644
--- a/InfluxDBv2_Covid19_SouthAmerica/readme.md
+++ b/InfluxDBv2_Covid19_SouthAmerica/readme.md
@@ -8,7 +8,12 @@ This Dashboard graph information about COVID-19 focused in Argentina, Bolivia, B
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/InfluxDBv2_Covid19_SouthAmerica/covid.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/InfluxDBv2_Covid19_SouthAmerica/covid.yml
diff --git a/apache_jmeter/readme.md b/apache_jmeter/readme.md
index c63b688b..072ef15e 100644
--- a/apache_jmeter/readme.md
+++ b/apache_jmeter/readme.md
@@ -24,7 +24,12 @@ JMeter metrics available in this dashboard:
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/apache_jmeter/apache_jmeter.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/apache_jmeter/apache_jmeter.yml
diff --git a/apache_postgresql/readme.md b/apache_postgresql/readme.md
index c5211da2..2f6d0972 100644
--- a/apache_postgresql/readme.md
+++ b/apache_postgresql/readme.md
@@ -6,7 +6,12 @@ This InfluxDB Template can be used to monitor a website running on Apache HTTPd
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/apache_postgresql/website_template.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/apache_postgresql/website_template.yml
diff --git a/apex_legends/readme.md b/apex_legends/readme.md
index fa249b36..73e05633 100644
--- a/apex_legends/readme.md
+++ b/apex_legends/readme.md
@@ -12,7 +12,12 @@ Stats are that of a fantastic YouTuber [iTemp Plays](https://www.youtube.com/use
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/apex_legends/apex_legends_template.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/apex_legends/apex_legends_template.yml
diff --git a/aws_cloudwatch/readme.md b/aws_cloudwatch/readme.md
index e744ce20..a13b97be 100644
--- a/aws_cloudwatch/readme.md
+++ b/aws_cloudwatch/readme.md
@@ -15,7 +15,12 @@ Provided by: [bonitoo.io](.)
 
 ### Quick install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/aws_cloudwatch/aws_cloudwatch.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -f https://raw.githubusercontent.com/influxdata/community-templates/master/aws_cloudwatch/aws_cloudwatch.yml
@@ -30,7 +35,7 @@ This template includes the following:
 - 1 Variable: `bucket`
 - 1 Telegraf Configuration: `AWS CloudWatch`
 
-## Setup instructions
+## Setup Instructions
 
 Load the dashboards and use the [Telegraf CloudWatch plugin](https://github.com/influxdata/telegraf/tree/master/plugins/inputs/cloudwatch) into your
 environment.
diff --git a/csgo/readme.md b/csgo/readme.md
index e71ff1cc..53203a8b 100644
--- a/csgo/readme.md
+++ b/csgo/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your game in CSGO. Information about
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/csgo/csgo.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/csgo/csgo.yml
diff --git a/currency_exchange_rates/readme.md b/currency_exchange_rates/readme.md
index 8d2cca35..1ef1be6e 100644
--- a/currency_exchange_rates/readme.md
+++ b/currency_exchange_rates/readme.md
@@ -22,7 +22,12 @@ It also shows how to use functions such as [timedMovingAverage()](https://v2.doc
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/currency_exchange_rates/currency_exchange_rates.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/currency_exchange_rates/currency_exchange_rates.yml
diff --git a/docker/readme.md b/docker/readme.md
index fc62ec52..cc15b5d6 100644
--- a/docker/readme.md
+++ b/docker/readme.md
@@ -6,7 +6,12 @@ Use this InfluxDB template to monitor Docker.
 
 ### Quick install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/docker/docker.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -f https://raw.githubusercontent.com/influxdata/community-templates/master/docker/docker.yml
@@ -23,7 +28,7 @@ influx apply -f https://raw.githubusercontent.com/influxdata/community-templates
 - 1 Notification Endpoint: Http Post
 - 1 Notification Rules: Crit Alert
 
-## Setup instructions
+## Setup Instructions
 
   General instructions on using InfluxDB Templates can be found in the [use a template](../docs/use_a_template.md) document.
     
diff --git a/endpoint-security-state/readme.md b/endpoint-security-state/readme.md
index 2033b90b..5cc425ee 100644
--- a/endpoint-security-state/readme.md
+++ b/endpoint-security-state/readme.md
@@ -1,4 +1,4 @@
-# Endpoint Security State Template
+## Endpoint Security State Template
 
 This InfluxDB template works by connecting to secure endpoints and attempting to log in. Using the `http_response` and `x509_cert` Telegraf plugins, availability, authentication, and certificate information is collected.
 The dashboard displays the general availability for each endpoint along with the x509 certificate status and authentication state.
@@ -10,6 +10,18 @@ The dashboard displays the general availability for each endpoint along with the
 - "🔴" Service is critical.  Endpoint is unavailable, certificate is or will expire in less than 1 day, or authentication is failing.
 - "❓" We could not determine the state of the service.
 
+### Quick Install
+
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/endpoint-security-state/endpoint-security-state.yml
+
+#### Influx CLI
+From your [InfluxDB configured CLI environment](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/):
+```
+influx apply --template-url https://raw.githubusercontent.com/influxdata/community-templates/master/endpoint-security-state/endpoint-security-state.yml
+```
+
 ## Included Resources
 
 - 1 Bucket: `telegraf`
@@ -25,12 +37,6 @@ The dashboard displays the general availability for each endpoint along with the
 
 ## Setup Instructions
 
-### Install the template package
-From your [InfluxDB configured CLI environment](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/):
-```
-influx apply --template-url https://raw.githubusercontent.com/influxdata/community-templates/master/endpoint-security-state/endpoint-security-state.yml
-```
-
 ### Customize the Telegraf configuration
 Add the endpoints you would like to watch to specific input section(s).
 For certificate verfification add URLs to the `sources` list in the `x509_cert` plugin configuration.
diff --git a/fortnite/readme.md b/fortnite/readme.md
index 881d48cd..f2d6f742 100644
--- a/fortnite/readme.md
+++ b/fortnite/readme.md
@@ -27,6 +27,11 @@ Provides performance insights and metrics tracking for both professional and ama
 
 ### Quick Install
 
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/fortnite/fn-template.yml
+
+#### Influx CLI
 If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
diff --git a/gcp_monitoring/readme.md b/gcp_monitoring/readme.md
index 42db5883..e30fa187 100644
--- a/gcp_monitoring/readme.md
+++ b/gcp_monitoring/readme.md
@@ -19,7 +19,12 @@ Cloud Monitoring API v3. There are three dashboards in this template.**
 
 ### Quick install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/gcp_monitoring/gcp_monitoring.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -f https://raw.githubusercontent.com/influxdata/community-templates/master/gcp_monitoring/gcp_monitoring.yml
@@ -34,7 +39,7 @@ This template includes the following:
 - 1 Variable: `bucket`
 - 1 Telegraf Config: `GCP Stackdriver`
 
-## Setup instructions
+## Setup Instructions
 
 
 Load the dashboards and use the Telegraf Stackdriver plugin into your
diff --git a/github/readme.md b/github/readme.md
index 2e43934f..7eb2d55a 100644
--- a/github/readme.md
+++ b/github/readme.md
@@ -8,7 +8,12 @@ This dashboard help you get metrics of your Github repository.
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/github/github.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/github/github.yml
diff --git a/haproxy/readme.md b/haproxy/readme.md
index ec29836b..d2ec9ef5 100644
--- a/haproxy/readme.md
+++ b/haproxy/readme.md
@@ -8,7 +8,12 @@ This dashboard help you get metrics of your HAProxy instance.
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/haproxy/haproxy.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/haproxy/haproxy.yml
diff --git a/influxdb2_oss_metrics/readme.md b/influxdb2_oss_metrics/readme.md
index c7288e54..de4a5a23 100644
--- a/influxdb2_oss_metrics/readme.md
+++ b/influxdb2_oss_metrics/readme.md
@@ -8,7 +8,12 @@ This InfluxDB Template can be used to monitor your already running InfluxDB 2 in
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/influxdb2_oss_metrics/influxdb2_oss_metrics.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/influxdb2_oss_metrics/influxdb2_oss_metrics.yml
diff --git a/jboss_wildfly/readme.md b/jboss_wildfly/readme.md
index dd0b922f..672e4c02 100644
--- a/jboss_wildfly/readme.md
+++ b/jboss_wildfly/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your jBoss-Wildfly instance. Uptime,
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/jboss_wildfly/jboss_wildfly.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/jboss_wildfly/jboss_wildfly.yml
diff --git a/jenkins/readme.md b/jenkins/readme.md
index 2012fca6..8560142d 100644
--- a/jenkins/readme.md
+++ b/jenkins/readme.md
@@ -6,7 +6,12 @@ This InfluxDB Template can be used to montior a Jenkins instance
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/jenkins/jenkins.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/jenkins/jenkins.yml
diff --git a/k8s/readme.md b/k8s/readme.md
index ec4c61bd..c66fdb35 100644
--- a/k8s/readme.md
+++ b/k8s/readme.md
@@ -15,7 +15,12 @@ supports Google Cloud Platform, AWS and on-premise K8S environments.**
 
 ### Quick install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/k8s/k8s.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -f https://raw.githubusercontent.com/influxdata/community-templates/master/k8s/k8s.yml
@@ -31,7 +36,7 @@ This template includes the following:
 - 1 Telegraf Config: `K8S Configuration`
 
 
-## Setup instructions
+## Setup Instructions
 
 Set up and install Telegraf `kubernetes` and `kube_inventory` plugins into your
 Telegraf configmap.
diff --git a/kafka/readme.md b/kafka/readme.md
index a6c6f866..1e2ba433 100644
--- a/kafka/readme.md
+++ b/kafka/readme.md
@@ -1,23 +1,34 @@
-# Kafka Monitoring Template with Telegraf and Jolokia
+## Kafka Monitoring Template with Telegraf and Jolokia
 
-## Dashboards
+### Dashboards
 
-### Kafka
+#### Kafka
 
    <img src="images/kafka-dash.png" width="425"/> <img src="images/kafka-dash-light.png" width="425"/>
    
-### Kafka Producer Metrics
+#### Kafka Producer Metrics
 
    <img src="images/kafka-dash-producer.png" width="425"/> <img src="images/kafka-dash-producer-light.png" width="425"/>
    
-### Kafka Consumer Metrics
+#### Kafka Consumer Metrics
 
    <img src="images/kafka-dash-consumer.png" width="425"/> <img src="images/kafka-dash-consumer-light.png" width="425"/>
 
-### Kafka JVM
+#### Kafka JVM
    
    <img src="images/kafka-dash-jvm.png" width="425"/> <img src="images/kafka-dash-jvm-light.png" width="425"/>
 
+### Quick Install
+
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/kafka/kafka-template.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials configured in the CLI, you can install this template with:
+
+`influx apply -f https://raw.githubusercontent.com/influxdata/community-templates/master/kafka/kafka-template.yml`
+
 ## Requirements
 
 * Set environment variables on host/s from which Telegraf will be sending metrics.  These are:
@@ -35,10 +46,7 @@
 
 *Note: Kafka and Zookeper can be easily obtained and managed through the open source [Confluent Platform](https://www.confluent.io/download).*
 
-## Get started
-If you have your InfluxDB credentials configured in the CLI, you can install this template with:
-
-`influx apply -f https://raw.githubusercontent.com/influxdata/community-templates/master/kafka/kafka-template.yml`
+## Setup Instructions
 
 Once installed, you'll need to start up Telegraf to pull metrics from your Jolokia-attached Kafka broker/s.  Checkout [Telegraf docs](https://docs.influxdata.com/telegraf/v1.14/) for installing and starting Telegraf.
 
diff --git a/linux_system/readme.md b/linux_system/readme.md
index 26b68d5e..5af9b107 100644
--- a/linux_system/readme.md
+++ b/linux_system/readme.md
@@ -6,7 +6,12 @@ This InfluxDB Template can be used to monitor your Linux System.
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/linux_system/linux_system.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/linux_system/linux_system.yml
diff --git a/minio/readme.md b/minio/readme.md
index 5eefb937..ddf2a60f 100644
--- a/minio/readme.md
+++ b/minio/readme.md
@@ -8,7 +8,12 @@ This template allows you to monitor your MinIO instance. The data you can watch
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/minio/minio.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/minio/minio.yml
diff --git a/modbus/readme.md b/modbus/readme.md
index dc5ddd8c..2a840aa4 100644
--- a/modbus/readme.md
+++ b/modbus/readme.md
@@ -9,7 +9,12 @@ The goal of this template is to provide an example of using Telgraf's Modbus inp
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/modbus/modbus.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/modbus/modbus.yml
diff --git a/mongodb/readme.md b/mongodb/readme.md
index 36ce3a7c..dd7f9783 100644
--- a/mongodb/readme.md
+++ b/mongodb/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your MongoDB instance. Uptime, Conne
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/mongodb/mongodb.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/mongodb/mongodb.yml
diff --git a/monitoring_influxdb_1.x/readme.md b/monitoring_influxdb_1.x/readme.md
index 924ca813..233dc0c7 100644
--- a/monitoring_influxdb_1.x/readme.md
+++ b/monitoring_influxdb_1.x/readme.md
@@ -8,7 +8,12 @@ This InfluxDB Template can be used to monitor your already running InfluxDB 1.x
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/monitoring_influxdb_1.x/influxdb1.x.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/monitoring_influxdb_1.x/influxdb1.x.yml
diff --git a/mssql/readme.md b/mssql/readme.md
index e883b8d3..4a3b1cef 100644
--- a/mssql/readme.md
+++ b/mssql/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your Microsoft SQL Server. Uptime, C
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/mssql/mssql.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/mssql/mssql.yml
diff --git a/mysql_mariadb/readme.md b/mysql_mariadb/readme.md
index 95ecd61f..34f7a49a 100644
--- a/mysql_mariadb/readme.md
+++ b/mysql_mariadb/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your MySQL/MariaDB instance. Uptime,
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/mysql_mariadb/mysql_mariadb.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/mysql_mariadb/mysql_mariadb.yml
diff --git a/network_interface_performance/readme.md b/network_interface_performance/readme.md
index 8681910b..1b358648 100644
--- a/network_interface_performance/readme.md
+++ b/network_interface_performance/readme.md
@@ -8,7 +8,12 @@ This InfluxDB Template can be used to monitor your network traffic across multip
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/network_interface_performance/network_interface_performance.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/network_interface_performance/network_interface_performance.yml
diff --git a/nginx_mysql/readme.md b/nginx_mysql/readme.md
index 05bee5a8..ff66a31f 100644
--- a/nginx_mysql/readme.md
+++ b/nginx_mysql/readme.md
@@ -6,7 +6,12 @@ This InfluxDB Template can be used to monitor a website running on NGINX and MyS
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/nginx_mysql/nginx_mysql.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/nginx_mysql/nginx_mysql.yml
diff --git a/postgresql/readme.md b/postgresql/readme.md
index 83a451f2..8a5944b2 100644
--- a/postgresql/readme.md
+++ b/postgresql/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your Postgres instance. CPU Usage, R
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/postgresql/postgres.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/postgresql/postgres.yml
diff --git a/redis/readme.md b/redis/readme.md
index 4b3e049e..70043b5e 100644
--- a/redis/readme.md
+++ b/redis/readme.md
@@ -6,7 +6,12 @@ This InfluxDB Template can be used to monitor Redis.
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/redis/redis.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/redis/redis.yml
diff --git a/sflow/readme.md b/sflow/readme.md
index c12788d5..da549296 100644
--- a/sflow/readme.md
+++ b/sflow/readme.md
@@ -8,7 +8,12 @@ This InfluxDB Template can be used to monitor traffic from sFlow sources.
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/sflow/sflow.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/sflow/sflow.yml
diff --git a/snmp/readme.md b/snmp/readme.md
index a20afd23..6d2c213a 100644
--- a/snmp/readme.md
+++ b/snmp/readme.md
@@ -10,7 +10,12 @@ This template provides several dashboards showing metrics provided via SNMP prot
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/snmp/snmp.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/snmp/snmp.yml
diff --git a/speedtest/readme.md b/speedtest/readme.md
index 9a7c2f78..1ad24502 100644
--- a/speedtest/readme.md
+++ b/speedtest/readme.md
@@ -8,7 +8,12 @@ This template offer a view of your Internet connection Speed.
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/speedtest/speedtest.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/speedtest/speedtest.yml
diff --git a/telegraf/readme.md b/telegraf/readme.md
index 50848a6a..94e5d4ec 100644
--- a/telegraf/readme.md
+++ b/telegraf/readme.md
@@ -8,7 +8,12 @@ Provided by: Steven Soroka
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/telegraf/manifest.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/telegraf/manifest.yml
diff --git a/tomcat/readme.md b/tomcat/readme.md
index 54aaea59..cdee306e 100644
--- a/tomcat/readme.md
+++ b/tomcat/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your Apache Tomcat instance. Current
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/tomcat/tomcat.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/tomcat/tomcat.yml
diff --git a/vsphere/readme.md b/vsphere/readme.md
index 11e5230e..dc06d067 100644
--- a/vsphere/readme.md
+++ b/vsphere/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your vSphere host. Uptime, CPU, RAM,
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/vsphere/vsphere.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/vsphere/vsphere.yml
diff --git a/windows_system/readme.md b/windows_system/readme.md
index 3ac1ea5e..6d5be45d 100644
--- a/windows_system/readme.md
+++ b/windows_system/readme.md
@@ -6,7 +6,12 @@ This InfluxDB Template can be used to monitor your Windows System.
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/windows_system/windows_system.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/windows_system/windows_system.yml
diff --git a/x509/readme.md b/x509/readme.md
index e12488a0..92e4ae13 100644
--- a/x509/readme.md
+++ b/x509/readme.md
@@ -8,7 +8,12 @@ This Dashboard is very simple but can help you with information about your x509
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/x509/x509.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/x509/x509.yml
diff --git a/zookeeper/readme.md b/zookeeper/readme.md
index 61f7c60e..06f0ef31 100644
--- a/zookeeper/readme.md
+++ b/zookeeper/readme.md
@@ -8,7 +8,12 @@ This Dashboard offers you information about your ZooKeeper. Almost all of the me
 
 ### Quick Install
 
-If you have your InfluxDB credentials [configured in the CLI](Vhttps://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
+#### InfluxDB UI
+
+In the InfluxDB UI, go to Settings->Templates and enter this URL: https://raw.githubusercontent.com/influxdata/community-templates/master/zookeeper/zookeeper.yml
+
+#### Influx CLI
+If you have your InfluxDB credentials [configured in the CLI](https://v2.docs.influxdata.com/v2.0/reference/cli/influx/config/), you can install this template with:
 
 ```
 influx apply -u https://raw.githubusercontent.com/influxdata/community-templates/master/zookeeper/zookeeper.yml