We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
I have installed the driver and I still cannot get the Ethernet Lan to Function. It says connecting and than goes to cable unplugged.
Error log: dmesg | grep e1000e [ 1.259210] e1000e: loading out-of-tree module taints kernel. [ 1.270963] e1000e: module verification failed: signature and/or required key missing - tainting kernel [ 1.272637] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI [ 1.272637] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. [ 1.274033] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.368541] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.452371] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 18:db:f2:55:f9:6b [ 1.452372] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.452455] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.453314] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 25.418348] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 25.418351] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 26.217252] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 27.956536] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 27.956540] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 28.765213] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 30.758549] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 30.758551] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 31.573315] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 44.279560] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 44.279562] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 45.041075] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
System: Kernel: 5.4.0-67-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Cinnamon 4.8.6 wm: muffin dm: LightDM Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal Machine: Type: Laptop System: Dell product: Latitude E7470 v: N/A serial: Chassis: type: 9 serial: Mobo: Dell model: 0T6HHJ v: A00 serial: UEFI [Legacy]: Dell v: 1.27.3 date: 01/07/2021
Network: Device-1: Intel Ethernet I219-LM vendor: Dell Latitude E7470 driver: e1000e v: 3.8.4-NAPI port: f040 bus ID: 00:1f.6 chip ID: 8086:156f IF: enp0s31f6 state: down mac: Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel port: f040 bus ID: 01:00.0 chip ID: 8086:24f3 IF: wlp1s0 state: up mac: IF-ID-1: virbr0 state: down mac: IF-ID-2: virbr0-nic state: down mac:
The text was updated successfully, but these errors were encountered:
No branches or pull requests
I have installed the driver and I still cannot get the Ethernet Lan to Function. It says connecting and than goes to cable unplugged.
Error log:
dmesg | grep e1000e
[ 1.259210] e1000e: loading out-of-tree module taints kernel.
[ 1.270963] e1000e: module verification failed: signature and/or required key missing - tainting kernel
[ 1.272637] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI
[ 1.272637] e1000e: Copyright(c) 1999 - 2020 Intel Corporation.
[ 1.274033] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.368541] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.452371] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 18:db:f2:55:f9:6b
[ 1.452372] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.452455] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.453314] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 25.418348] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 25.418351] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 26.217252] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 27.956536] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 27.956540] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 28.765213] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 30.758549] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 30.758551] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 31.573315] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
[ 44.279560] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 44.279562] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[ 45.041075] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
System: Kernel: 5.4.0-67-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Cinnamon 4.8.6
wm: muffin dm: LightDM Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal
Machine: Type: Laptop System: Dell product: Latitude E7470 v: N/A serial: Chassis:
type: 9 serial:
Mobo: Dell model: 0T6HHJ v: A00 serial: UEFI [Legacy]: Dell v: 1.27.3
date: 01/07/2021
Network: Device-1: Intel Ethernet I219-LM vendor: Dell Latitude E7470 driver: e1000e
v: 3.8.4-NAPI port: f040 bus ID: 00:1f.6 chip ID: 8086:156f
IF: enp0s31f6 state: down mac:
Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel port: f040 bus ID: 01:00.0
chip ID: 8086:24f3
IF: wlp1s0 state: up mac:
IF-ID-1: virbr0 state: down mac:
IF-ID-2: virbr0-nic state: down mac:
The text was updated successfully, but these errors were encountered: