no files matched glob pattern "*.sof"

[RDMMDLC]

program-fpga-board.bat

---

no files matched glob pattern "*.sof"
while executing
"glob *.sof"
invoked from within
"set sof_files [glob *.sof]"
(file "program-fpga-board.tcl" line 69)

Error (23031): Evaluation of Tcl script program-fpga-board.tcl unsuccessful
Error: Quartus Prime Signal Tap was unsuccessful. 1 error, 0 warnings
Error: Peak virtual memory: 424 megabytes
Error: Processing ended: Tue Oct 19 23:38:12 2021
Error: Elapsed time: 00:00:02
Error: Total CPU time (on all processors): 00:00:00
Presione una tecla para continuar . . .

[RDMMDLC]

Which SOF would you like to use? 1

Selected SOF file: ltcminer.sof

Programming ...

Result: Info: ******************************************************************
*
Info: Running Quartus Prime Programmer
Info: Version 20.1.1 Build 720 11/11/2020 SJ Lite Edition
Info: Copyright (C) 2020 Intel Corporation. All rights reserved.
Info: Your use of Intel Corporation's design tools, logic functions
Info: and other software and tools, and any partner logic
Info: functions, and any output files from any of the foregoing
Info: (including device programming or simulation files), and any
Info: associated documentation or information are expressly subject
Info: to the terms and conditions of the Intel Program License
Info: Subscription Agreement, the Intel Quartus Prime License Agreement,
Info: the Intel FPGA IP License Agreement, or other applicable license
Info: agreement, including, without limitation, that your use is for
Info: the sole purpose of programming logic devices manufactured by
Info: Intel and sold by Intel or its authorized distributors. Please
Info: refer to the applicable agreement for further details, at
Info: https://fpgasoftware.intel.com/eula.
Info: Processing started: Wed Oct 20 01:33:37 2021
Info: Command: quartus_pgm -c "USB-Blaster [USB-0]" -m JTAG -o P;ltcminer.sof
Info (213045): Using programming cable "USB-Blaster [USB-0]"
Info (213011): Using programming file ltcminer.sof with checksum 0x00D177D7 for
device EP4CE22F17@1
Info (209060): Started Programmer operation at Wed Oct 20 01:33:38 2021
Error (209015): Can't configure device. Expected JTAG ID code 0x020F30DD for dev
ice 1, but found JTAG ID code 0x020F10DD. Make sure the location of the target d
evice on the circuit board matches the device's location in the device chain in
the Chain Description File (.cdf).
Error (209012): Operation failed
Info (209061): Ended Programmer operation at Wed Oct 20 01:33:38 2021
Error: Quartus Prime Programmer was unsuccessful. 2 errors, 0 warnings
Error: Peak virtual memory: 295 megabytes
Error: Processing ended: Wed Oct 20 01:33:38 2021
Error: Elapsed time: 00:00:01
Error: Total CPU time (on all processors): 00:00:01
child process exited abnormally

ERROR: Programming failed.

Info (23030): Evaluation of Tcl script program-fpga-board.tcl was successful
Info: Quartus Prime Signal Tap was successful. 0 errors, 0 warnings
Info: Peak virtual memory: 425 megabytes
Info: Processing ended: Wed Oct 20 01:33:38 2021
Info: Elapsed time: 00:00:05
Info: Total CPU time (on all processors): 00:00:00
Presione una tecla para continuar . . .

[RDMMDLC]

info altera cyclone iv EP4CE6E22C8N