My creation of custom components fro ESP home.
20-04-2023 - Genvexv2 added support for Optima260 control unit. Chengad the way controlbits are mapped en yaml file masked out as bool vars for home assistant.
04-07-2022 - Wavin v2 has issues with ESPhome 2022.6. It fails writing a number back to the Wavin device. Added yaml to basic.yaml to ensure it uses the modbus and modbus_controller component from ESPhome 2022.5.1. Please to a clean and update your ESPhome device to make it work with ESPhome 2022.6.
23-03-2022 - Wavin Sentio - Added support for Wavin Sentio. nic6911 https://github.com/nic6911 have worked hard on a Wavin Sentio component and it has now beed added to this repo. 23-03-2022 - WavinAhc9000v2 - BREAKING CHANGE!!! Add the basic.yaml to the list of packages, see example below. Added support for comfort temperature (seperate climate entity). Added mode action to reflect the current output state of the channel. Idle = not heating, Heat = Heating 23-03-2022 - Genvexv2 - Changed current temp from T1 to T7 as T1 drops when bypass is open. Changed climate entity to .1 decimals.
21-03-2022 - WavinAhc9000v2 - A big thanks to nic6911 https://github.com/nic6911 for testing the comfort temperature config file and providing config files for confort for all the channels
18-03-2022 - WavinAhc9000v2 - Added a file for comfort temperature for channel 1. Only for testing. HAVENT TESTED MY SELF AS I DONT HAVE A THERMOSTAT WITH IR. Please report back if working or not.
16-03-2022 - WavinAhc9000v2 - Inspired by Jopand's work on the nilan custom component I have created an updated version for Wavin Ahc 9000, utilizing the esphome modbus_controller and alot of esphome lambda (Thank you for not using standard modbus function Wavin!).
02-03-2022 - Genvexv2 - Inspired by Jopand's work on the nilan custom component I have created an updated version for Genvex, utilizing the esphome modbus_controller.
packages:
remote_package:
url: https://github.com/heinekmadsen/esphome_components
ref: main
files: [components/genvexv2/optima250.yaml]
refresh: 0s
uart:
- id: uart_genvex
rx_pin: GPIO16
tx_pin: GPIO17
parity: EVEN
baud_rate: 19200
stop_bits: 1
modbus:
- id: genvex_modbus
uart_id: uart_genvex
modbus_controller:
id: genvex_modbus_controller
address: 1
modbus_id: genvex_modbus
update_interval: 60s
command_throttle: 10msTo use the Wavin V2 you need to be running the ESPHome dev version in Home Assistant (https://esphome.io/guides/faq.html#how-do-i-use-the-latest-bleeding-edge-version)
To make it easy to name the entities we make use of substitutions in ESPHome. Add this at the top of your yaml file and edit to your needs:
substitutions:
# UNIQUE NAME FOR THE DEVICE
device: wavin # Case sensitive!!!
name: Wavin # "Friendly name" - not case sensitive!!!
# CHANNEL friendly names (If using spaces remember to add ")
channel_01_friendly_name: Livingroom
channel_02_friendly_name: Kitchen
channel_03_friendly_name: Toilet
channel_04_friendly_name: "Big room 1"
channel_05_friendly_name: "Channel 05"
channel_06_friendly_name: "Channel 06"
channel_07_friendly_name: "Channel 07"
channel_08_friendly_name: "Channel 08"
channel_09_friendly_name: "Channel 09"
channel_10_friendly_name: "Channel 10"
channel_11_friendly_name: "Channel 11"
channel_12_friendly_name: "Channel 12"
channel_13_friendly_name: "Channel 13"
channel_14_friendly_name: "Channel 14"
channel_15_friendly_name: "Channel 15"
channel_16_friendly_name: "Channel 16"
# CHANNEL ID´S (ONLY LOWER CASE LETTERS, NO SPACES) used for entity ids
channel_01_id: livingroom
channel_02_id: kitchen
channel_03_id: toilet
channel_04_id: big_room_1
channel_05_id: channel_05
channel_06_id: channel_06
channel_07_id: channel_07
channel_08_id: channel_08
channel_09_id: channel_09
channel_10_id: channel_10
channel_11_id: channel_11
channel_12_id: channel_12
channel_13_id: channel_13
channel_14_id: channel_14
channel_15_id: channel_15
channel_16_id: channel_16Add this after your normal ESPhome config (wifi, ota, api, etc....) and uncomment the config lines for the active channels on your Wavin Ahc 9000
# Uncomment the active channels on your Wavin Ahc 9000
packages:
remote_package:
url: https://github.com/heinekmadsen/esphome_components
ref: main
files:
- components/wavinahc9000v2/configs/basic.yaml # REQUIRED FOR WAVIN AHC 9000
- components/wavinahc9000v2/configs/channel_01_comfort.yaml # Only for channels with thermostat with IR sensor
- components/wavinahc9000v2/configs/channel_02.yaml
- components/wavinahc9000v2/configs/channel_02_comfort.yaml # Only for channels with thermostat with IR sensor
- components/wavinahc9000v2/configs/channel_03.yaml
- components/wavinahc9000v2/configs/channel_03_comfort.yaml # Only for channels with thermostat with IR sensor
- components/wavinahc9000v2/configs/channel_04.yaml
- components/wavinahc9000v2/configs/channel_04_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_05.yaml
#- components/wavinahc9000v2/configs/channel_05_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_06.yaml
#- components/wavinahc9000v2/configs/channel_06_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_07.yaml
#- components/wavinahc9000v2/configs/channel_07_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_08.yaml
#- components/wavinahc9000v2/configs/channel_08_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_09.yaml
#- components/wavinahc9000v2/configs/channel_09_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_10.yaml
#- components/wavinahc9000v2/configs/channel_10_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_11.yaml
#- components/wavinahc9000v2/configs/channel_11_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_12.yaml
#- components/wavinahc9000v2/configs/channel_12_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_13.yaml
#- components/wavinahc9000v2/configs/channel_13_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_14.yaml
#- components/wavinahc9000v2/configs/channel_14_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_15.yaml
#- components/wavinahc9000v2/configs/channel_15_comfort.yaml # Only for channels with thermostat with IR sensor
#- components/wavinahc9000v2/configs/channel_16.yaml
#- components/wavinahc9000v2/configs/channel_16_comfort.yaml # Only for channels with thermostat with IR sensor
refresh: 0s
uart:
- id: uart_${device}
rx_pin: GPIO16
tx_pin: GPIO17
baud_rate: 38400
stop_bits: 1
parity: NONE
modbus:
- id: ${device}_modbus
uart_id: uart_${device}
modbus_controller:
id: ${device}_modbus_controller
address: 1
modbus_id: wavin_modbus
update_interval: 5sFollow the instructions below for the old genvex and wavin components Add this repository to your ESPHome config yaml:
external_components:
- source: github://heinekmadsen/esphome_componentsuart:
rx_pin: GPIO16
tx_pin: GPIO17
parity: EVEN
baud_rate: 19200
id: uart_modbus
stop_bits: 1
external_components:
- source: github://heinekmadsen/esphome_components
refresh: 0s
modbus:
uart_id: uart_modbus
genvex:
address: 1
update_interval: 60s
sensor:
- platform: genvex
temp_t1:
name: "genvex_temp_t1"
id: genvex_temp_t1
target_temp:
name: "genvex_target_temp"
speed_mode:
name: "genvex_speed_mode"
climate:
- platform: genvex
name: genvex
sensor: genvex_temp_t1Reach out to dyrvigk for furter info on PCB https://github.com/dyrvigk
esphome:
name: genvex-wavin
platform: ESP32
board: esp32dev
# Enable logging
logger:
# level: VERY_VERBOSE
# Enable Home Assistant API
api:
ota:
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO0_IN
phy_addr: 1
power_pin: GPIO14
status_led:
pin: GPIO15
output:
- platform: ledc
pin: GPIO2
id: gpio_2
# Example usage in a light
light:
- platform: monochromatic
output: gpio_2
name: "network Light"
interval:
- interval: 1s
then:
if:
condition:
api.connected
then:
- output.turn_on: gpio_2
- output.ledc.set_frequency:
id: gpio_2
frequency: "1000Hz"
- output.set_level:
id: gpio_2
level: "10%"
else:
- output.turn_off: gpio_2
external_components:
- source: github://heinekmadsen/esphome_components
refresh: 0s
uart:
- id: uart_1
rx_pin: GPIO4
tx_pin: GPIO5
baud_rate: 38400
stop_bits: 1
- id: uart_2
rx_pin: GPIO16
tx_pin: GPIO17
parity: EVEN
baud_rate: 19200
stop_bits: 1
modbus:
- id: mod1
uart_id: uart_1
- id: mod2
uart_id: uart_2
# Wavin
wavinAhc9000:
modbus_id: mod1
update_interval: 120s
rw_pin: 33
climate:
- platform: wavinAhc9000
channel: 1
name: "Channel 1"
visual:
temperature_step: 0.5 °C
battery_level:
name: "Channel 1 Battery"
state_class: "measurement"
current_temp:
name: "Channel 1 Temp"
state_class: ""
- platform: wavinAhc9000
channel: 2
name: "Channel 2"
visual:
temperature_step: 0.5 °C
battery_level:
name: "Channel 2 Battery"
current_temp:
name: "Channel 2 Temp"
- platform: genvex
name: genvex
sensor: genvex_temp_t1
# Genvex
genvex:
modbus_id: mod2
address: 1
update_interval: 60s
sensor:
- platform: genvex
temp_t1:
name: "genvex_temp_t1"
id: genvex_temp_t1
temp_t3:
name: "genvex_temp_t3"
temp_t4:
name: "genvex_temp_t4"
temp_t7:
name: "genvex_temp_t7"
temp_t2_panel:
name: "genvex_temp_t2_panel"
measured_humidity:
name: "genvex_measured_humidity"
humidity_calculated_setpoint:
name: "genvex_humidity_calculated_setpoint"
alarm_bit:
name: "genvex_alarm_bit"
inlet_fan:
name: "genvex_inlet_fan"
extract_fan:
name: "genvex_extract_fan"
bypass:
name: "genvex_bypass"
watervalve:
name: "genvex_watervalve"
humidity_fan_control:
name: "genvex_humidity_fan_control"
bypass_on_off:
name: "genvex_bypass_on_off"
target_temp:
name: "genvex_target_temp"
speed_mode:
name: "genvex_speed_mode"
heat:
name: "genvex_heat"
timer:
name: "genvex_timer"
binary_sensor:
- platform: status
name: "Genvex Wavin Controller Status"