Language pack

[liqijian101]

If I were to add a language pack, which file should I modify?

[luc-github]

For v3.x it is not ready yet sorry - I need to prepare tools for this #222
because according target translation file may be different -

For v2.x https://github.com/luc-github/ESP3D-WEBUI/wiki/Translation-support

[luc-github]

@liqijian101 for V3
If you want to do your test file - just merge all en.json file in one
and name it lang-<code language>.json for example lang-zh_cn.json
I suggest you to compress it to gz format only when you are happy of the result
You just need to upload to flash and select it in webui settings

I hope it help to wait final implementation

[liqijian101]

OK，thanks you,I will try it.

[liqijian101]

I translated most of the content and tested it without errors.
将下面的内容放到建立的lang-zh_cn.json文件中。
{
"lang":"简体中文",
"S1":"连接错误",
"S2":"正在连接...",
"S3":"看起来您已从另一个地方进行连接，因此此页现在已断开连接",
"S4":"解析响应错误，格式不正确",
"S5":"无法与ESP3D主板连接",
"S6":"WebSocket连接错误",
"S7":"解析参数错误，文件不正确",
"S8":"请重新连接我",
"S9":"已断开连接",
"S10":"与ESP3D主板连接已丢失",
"S11":"再次连接",
"S12":"关于 %s",
"S13":"仪表板",
"S14":"设置",
"S15":"捐赠 ESP3D",
"S16":"ESP3D主板固件",
"S17":"浏览器界面",
"S18":"浏览器版本",
"S19":"未知",
"S20":"转到github",
"S21":"解析数据错误，数据不正确",
"S22":"错误",
"S23":"刷新信息",
"S24":"关闭",
"S25":"更新",
"S26":"请确认",
"S27":"是",
"S28":"取消",
"S29":"否",
"S30":"是否更新?",
"S31":"是否上传?",
"S32":"上传中...",
"S33":"文件传输失败",
"S34":"更新完成",
"S35":"重启中...",
"S36":"功能",
"S37":"删除",
"polling":"轮询",
"S38":"Move Up",
"S39":"Move Down",
"S40":"Scan available networks",
"S41":"输入值",
"S42":"值不正确",
"S43":"设置",
"S44":"保存数据失败!",
"S45":"可用网络列表",
"S47":"选择网络",
"S48":"加入",
"S49":"受保护",
"S50":"刷新",
"S51":"选择此网络",
"S52":"导出",
"S53":"导出到文件",
"S54":"导入",
"S55":"从文件导入",
"S56":"导入文件有问题",
"S57":"正在导入...",
"S58":"重启ESP3D",
"S59":"这将重启ESP3D主板",
"S60":"请等待...",
"S61":"保存",
"S62":"保存并应用更改",
"S63":"显示",
"S64":"自动加载数据",
"S65":"文件",
"S66":"移轴",
"S67":"语言包",
"S68":"语言",
"S69":"not used",
"S70":"标签",
"S71":"值",
"S72":"帮助",
"S73":"General",
"S74":"启动打印",
"S75":"串口终端",
"terminal":"串口终端面板",
"S76":"详细模式",
"S77":"自动滚动",
"S78":"清除",
"S79":"清除终端信息",
"S80":"输入命令",
"S81":"发送",
"S82":"发送命令",
"S83":"存在错误，请先解决问题",
"S84":"创建失败 %s",
"S85":"删除失败 %s",
"S86":"关闭面板",
"S87":"下载文件?",
"S88":"上传",
"S89":"上传文件",
"S90":"创建目录",
"S91":"保存中...",
"S92":"串口终端面板",
"S93":"当启动时显示",
"S94":"编辑",
"S95":"最小化",
"jog":"移轴面板",
"files":"文件面板",
"S96":"扩展",
"S97":"使用 ; 分隔",
"S98":"总共",
"S99":"已使用",
"S100":"删除文件",
"S101":"删除目录",
"S102":"进行中...",
"S103":"请求失败",
"S104":"请输入目录名",
"S105":"输入目录名",
"S106":"创建",
"S107":"目标地址",
"S108":"下载中...",
"S109":"命令错误...",
"S110":"没有SD卡",
"S111":"无法打开目录",
"S112":"启用轮询命令",
"S113":"刷新时间",
"S114":"毫秒",
"S115":"命令",
"S116":"位置",
"S117":"关闭所有面板",
"S118":"移动距离",
"S119":"秒",
"S120":"开始时展开按钮",
"S121":"扩展",
"macros":"宏",
"S122":"强制移动查看",
"S123":"信息",
"S124":"看来您所处的环境有限，请使用IP地址打开浏览器使所有功能正常工作.",
"S125":"宏编辑器",
"S126":"OK",
"S127":"宏",
"S128":"添加宏",
"S129":"名称",
"S130":"颜色",
"S131":"文本颜色",
"S132":"图标",
"S133":"选择",
"S134":"选择图标",
"S135":"类型",
"S136":"输出",
"S137":"Flash",
"S138":"SD卡",
"S139":"URL网址",
"S140":"GCODE命令",
"S141":"文件名称",
"S142":"命令",
"S143":"SD",
"S144":"SD",
"S145":"需要认证",
"S146":"用户名",
"S147":"密码",
"S148":"登录",
"S149":"您现在已断开连接",
"S150":"网页界面版本",
"S151":"断开连接",
"S152":"要断开连接吗?",
"S153":"您的会话即将结束，是否要保持连接?",
"S154":"保持连接",
"S155":"其他页(Pages)",
"extracontents":"其他内容(Content)",
"S156":"添加内容(Content)",
"S157":"面板",
"S158":"Page页",
"S159":"Action",
"S160":"图像",
"S161":"内容(Content)",
"S162":"摄像头",
"S163":"下一步",
"S164":"上一步",
"S165":"设置",
"S166":"下次显示设置?",
"S167":"显示",
"S168":"隐藏",
"S169":"free to use",
"S170":"声音通知",
"S171":"更新网页界面(WebUI)",
"S172":"更新固件",
"S173":"Session timeout",
"S174":"Changes applied, now need to restart the board.",
"S175":"Operation canceled by user",
"S176":"Haptic feedback",
"S177":"列出可用的语言包",
"S178":"选择",
"S179":"选择这个语言包",
"S180":"选择这个主题包",
"S181":"主题",
"S182":"列出可用的主题",
"S183":"主题包",
"S184":"Hold Stream",
"S185":"Show Stream",
"S186":"保存图像",
"S187":"Panels list",
"S188":"TFT SD",
"S189":"TFT USB",
"S190":"SD",
"S191":"Extra SD",
"S192":"不允许使用目录",
"S193":"不允许多个文件",
"S194":"WebUI 和固件版本不兼容",
"S195":"保存数据时出错",
"S196":"显示信息页",
"S197":"显示机器设置",
"S198":"从清单中选择",
"S199":"尚未支持",
"S200":"Audio feedback",
"S201":"无效的用户名或密码",
"S202":"面板命令",
"S203":"固定面板命令",
"S204":"数据流(stream)命令",
"S205":"中止",
"S206":"清楚数据流错误",
"S207":"添加命令",
"panels":"面板设置",
"processing":"正在处理",
"no stream":"No stream",
"pause":"Stream on hold",
"resume stream":"Resume stream",
"sta fallback mode":"未连接上路由器时进入的模式(一定选择“设置模式”)",
"radio_boot":"启动时的无线模式(一定选择“是”)",
"general":"通用设置",
"chip id":"芯片ID",
"CPU Freq":"CPU频率",
"CPU Temp":"CPU温度",
"free mem":"可用内存",
"SDK":"SDK",
"flash size":"Flash大小",
"size for update":"可用于更新的内存空间",
"FS type":"文件系统类型",
"FS usage":"文件系统存空间使用率",
"sleep mode":"睡眠模式",
"wifi":"WiFi",
"HTTP port":"HTTP 端口",
"Telnet port":"Telnet 端口",
"Ftp ports":"Ftp 端口",
"Telnet Client":"Telnet 客户端",
"Ftp Client":"Ftp 客户端",
"Websocket port":"Websocket 端口",
"WebDav port":"WebDav 端口",
"WebDav Client":"WebDav 客户端",
"camera name":"摄像头名称",
"camera ports":"摄像头 端口",
"BT Status":"状态",
"connected":"已连接",
"disconnected":"已断开",
"cable":"电缆",
"ON":"启用",
"OFF":"禁用",
"DNS":"DNS",
"mac":"Mac 地址",
"signal":"信号强度",
"phy mode":"Phy 模式",
"visible":"可见",
"authentication":"认证",
"DHCP Server":"DHCP 服务器",
"clients":"客户端",
"direct":"直接",
"shared":"共享",
"debug":"调试",
"FW arch":"固件架构",
"FW ver":"固件版本",
"system":"系统",
"sta":"客户端模式",
"ap":"接入点模式/AP模式",
"mixed":"混合模式",
"service":"服务",
"http":"HTTP协议",
"telnetp":"Telnet协议",
"websocketp":"WebSocket协议",
"webdavp":"WebDav 协议",
"telnet":"Telnet",
"ftp":"FTP 协议",
"notification":"通知",
"network":"网络",
"yes":"是",
"no":"否",
"hostname":"主机网络名",
"radio mode":"无线模式",
"bt":"蓝牙",
"ethernet":"以太网",
"eth-sta":"以太网",
"SSID":"SSID",
"ip mode":"IP模式",
"none":"无",
"dhcp":"DHCP",
"static":"静态",
"ip":"IP",
"gw":"网关",
"msk":"掩码",
"pwd":"密码",
"channel":"频道",
"security":"安全",
"adm pwd":"管理员密码",
"user pwd":"用户密码",
"enable":"启用",
"port":"端口",
"control port":"控制端口",
"active port":"活动端口",
"passive port":"被动端口",
"time":"时间",
"i-time":"互联网时间",
"tzone":"时区",
"dst":"DST",
"t-server":"时间服务器",
"auto notif":"自动通知",
"pushover":"Pushover",
"email":"邮件",
"line":"Line",
"telegram":"电报",
"t1":"令牌1",
"t2":"令牌2",
"ts":"设置",
"device":"已连接设备",
"camera":"摄像头",
"buzzer":"蜂鸣器",
"sensor":"传感器",
"type":"类型",
"sd":"SD卡模式",
"speedx":"速度系数",
"targetfw":"目标固件",
"repetier":"Repetier",
"marlin":"Marlin",
"smoothieware":"Smoothieware",
"unknown":"未知",
"baud":"波特率",
"verbose":"详细",
"bootdelay":"延迟 (ms)",
"boot":"启动顺序",
"session timeout":"不活动超时 (min)",
"outputmsg":"输出消息",
"M117":"打印机屏幕",
"screen":"屏幕",
"ws":"Websocket",
"serial":"串口",
"intervalms":"间隔 (millisec)",
"modem":"调制解调器",
"light":"灯光",
"grbl":"Grbl",
"SD updater":"SD updater",
"setup":"设置模式",
"serial_bridge":"串口桥接",
"timeout":"Timeout, did not get response in time",
"P1":"覆盖配置",
"P2":"复位ESPD主板",
"P3":"保存当前设置?",
"P4":"重启ESPD主板以应用更改?",
"P5":"对不起，此界面仅适用于3D打印机，请使用CNC",
"P6":"归零（所有轴）",
"P7":"X轴归零",
"P8":"Y轴归零",
"P9":"Z轴归零",
"P10":"XY 移动速度",
"P11":"Z 移动速度",
"P12":"速度",
"P13":"关闭电机",
"P14":"mm/min",
"P15":"急停",
"P16":"mm",
"P17":"无法获取有效数据",
"P18":"移动到位置",
"P19":"复位",
"P20":"移动到: ",
"P27":"操作成功",
"P28":"操作失败",
"P29":"温度",
"P30":"流速",
"P31":"风扇",
"P32":"挤压Extrusion",
"temperatures": "温度面板",
"P34":"最大值 ",
"P35":"预热",
"P36":"挤出机",
"extruders": "挤出机面板",
"P37": "热床 $",
"P38":"停止加热",
"P39":"停止",
"P40":"全部停止",
"P41": "挤出机 $",
"P42": "调平探针(Probe)",
"P43":"打印机仓",
"P44":"冗余Redondant",
"P45":"显示风扇面板",
"P46":"显示速度面板",
"P47":"显示流速面板",
"P48": "最大值",
"P49":"混合挤出机",
"P50":"挤出机进给速率",
"P51":"颜色",
"P52":"颜色数量",
"P53":"挤出",
"P54":"反向",
"P55":"挤出距离",
"P56":"曲线图",
"charts": "曲线面板",
"P57":"控制模式",
"P58":"清除曲线图",
"P59":"时间戳",
"P60":"日期时间",
"P63":"正在打印",
"P64":"没有在打印",
"P65": "X轴移动到",
"P66": "Y轴移动到",
"P67": "打印机状态",
"P68": "",
"P69": "",
"P70": "",
"P71": "t",
"P72": "℃",
"P73":"归零（所有轴）",
"P74":"($) is axis",
"P75": "Z轴移动到",
"P76": "Jog up",
"P77": "Jog down",
"P78":"Jogging distance",
"P79":"使用键盘",
"P80":"[Arrow Up] X+, [Arrow Down] X-, [Arrow Left] Y-, [Arrow Right] Y+, [PageUp] Z+, [PageDown] Z-, [X] Home X, [Y] Home Y, [Z] Home Z, [Home] Home All, [M] Motor Off, [P] Move XY, [End] Move Z, [Delete] E-Stop, [1] Fr 100, [2] Fr 10, [3] Fr 1, [4] Fr 0.1",
"P81": "Keyboard keys",
"P82": "显示挤出机",
"P83": "显示热床",
"P84": "Show Chamber",
"P85": "显示探针",
"P86": "Show Redondant",
"P87": "显示主板",
"P88": "显示传感器",
"P89": "等待打印机提供的温度",
"P90": "主板",
"P91": "风扇 $",
"P92": "流速 $",
"P93": "速度 $",
"P94":"$ is value, # is targeted index",
"P95": "SD List command",
"P96":"其他控制",
"P97":"打印状态",
"P98":"暂停命令",
"P99":"继续命令",
"P100":"停止命令",
"P101":"SD 打印命令",
"P102":"TFT SD 打印命令",
"P103":"TFT USB 打印命令",
"P104":"预设值",
"P105":"消失了",
"P106":"命令",
"P107":"设置 %",
"P108":"天",
"P109":"小时",
"P110":"分钟",
"P111":"秒",
"P112":"左边",
"heating":"正在加热",
"controls": "其他控制面板",
"status": "状态面板"
}

[luc-github]

I have started a doc and some scripts : https://github.com/luc-github/ESP3D-WEBUI/blob/3.0/Memo/languagepack.md
I will try to do the missing check script today so all basic script should be available even UI is not yet finalized