diff --git a/examples/Unit_4RELAY_M5Atom/Unit_4RELAY_M5Atom.ino b/examples/Unit_4RELAY_M5Atom/Unit_4RELAY_M5Atom.ino index ffc78fd..6f746c9 100644 --- a/examples/Unit_4RELAY_M5Atom/Unit_4RELAY_M5Atom.ino +++ b/examples/Unit_4RELAY_M5Atom/Unit_4RELAY_M5Atom.ino @@ -34,7 +34,7 @@ UNIT_4RELAY relay; void setup() { - M5.begin(); // Init M5Atom. 初始化 M5Atom + M5.begin(true, false, false); // Init M5Atom. 初始化 M5Atom Serial.print(relay.begin(&Wire, 26, 32)); relay.Init(1); // Set the lamp and relay to synchronous mode(Async = // 0,Sync = 1). 将灯和继电器设为同步模式 @@ -45,10 +45,10 @@ void setup() { char count_i = 0; void loop() { - relay.relayAll(1); - delay(1000); - relay.relayAll(0); - delay(1000); + // relay.relayAll(1); + // delay(1000); + // relay.relayAll(0); + // delay(1000); if (M5.Btn.wasPressed()) { // If button A is pressed. 如果按键A按下 if ((count_i < 4)) { // Control relays turn on/off in sequence. diff --git a/examples/Unit_4RELAY_M5AtomS3/Unit_4RELAY_M5AtomS3.ino b/examples/Unit_4RELAY_M5AtomS3/Unit_4RELAY_M5AtomS3.ino new file mode 100644 index 0000000..8f27949 --- /dev/null +++ b/examples/Unit_4RELAY_M5AtomS3/Unit_4RELAY_M5AtomS3.ino @@ -0,0 +1,69 @@ +/* +******************************************************************************* +* Copyright (c) 2024 by M5Stack +* Equipped with M5AtomS3 sample source code +* 配套 M5AtomS3 示例源代码 +* Visit for more information: https://docs.m5stack.com/en/unit/4relay +* 获取更多资料请访问: https://docs.m5stack.com/zh_CN/unit/4relay +* +* Product: Unit 4RELAY. +* Date: 2024/6/12 +******************************************************************************* + Please connect to port ,Control 4 relays and demonstrate the asynchronous + control relay LED 请连接端口，控制4继电器，并演示异步控制继电器LED +------------------------------------------------------------------------------- + RELAY control reg | 0x10 + ----------------------------------------------------------------------------- + Relay_ctrl_mode_reg[0] | R/W | System control + | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + | R | R | R | R | R | R | R | Sync Mode | + | -Sync Mode:0 LED&Relay Async + | -Sync Mode:1 LED&Relay Sync + --------------------------------------------------------------------------------- + Relay_ctrl_mode_reg[1] | R/W | Relay & LED control + | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + | LED1| LED2| LED3| LED4| RLY1| RLY2| RLY3| RLY4| +-------------------------------------------------------------------------------*/ +// Note: The relay can only be controlled in synchronous mode, if the relay is +// controlled in asynchronous mode, it will be invalid. +// 注意:只能在同步模式下控制继电器,如果在异步模式下对继电器进行控制将无效,. + +#include "M5AtomS3.h" +#include "Unit_4RELAY.h" + +UNIT_4RELAY relay; + +void setup() { + auto cfg = M5.config(); + M5.begin(cfg); + M5.Lcd.setCursor(25, 2); + M5.Lcd.print("4-RELAY UNIT\n"); + Serial.print(relay.begin(&Wire, 2, 1)); + relay.Init(1); // Set the lamp and relay to synchronous mode(Async = + // 0,Sync = 1). 将灯和继电器设为同步模式 + M5.Lcd.printf(" Please pressed Btn. \n"); + relay.relayAll(0); +} + +char count_i = 0; + +void loop() { + // relay.relayAll(1); + // delay(1000); + // relay.relayAll(0); + // delay(1000); + + if (M5.BtnA.wasPressed()) { // If button A is pressed. 如果按键A按下 + if ((count_i < 4)) { // Control relays turn on/off in sequence. + // 控制继电器依次接通/断开 + Serial.printf("%d ON\n", count_i); + relay.relayWrite(count_i, 1); + } else if ((count_i >= 4)) { + Serial.printf("%d OFF\n", (count_i - 4)); + relay.relayWrite((count_i - 4), 0); + } + count_i++; + if (count_i >= 8) count_i = 0; + } + M5.update(); +} \ No newline at end of file diff --git a/examples/Unit_4RELAY_M5Core2/Unit_4RELAY_M5Core2.ino b/examples/Unit_4RELAY_M5Core2/Unit_4RELAY_M5Core2.ino index 7f62ee2..728130e 100644 --- a/examples/Unit_4RELAY_M5Core2/Unit_4RELAY_M5Core2.ino +++ b/examples/Unit_4RELAY_M5Core2/Unit_4RELAY_M5Core2.ino @@ -36,12 +36,13 @@ UNIT_4RELAY relay; void setup() { M5.begin(true, false, true, true); // Init M5Core2 And the I2C port(21,22). // 初始化 M5Core2 和I2C(21,22)端口 - M5.Lcd.setCursor( - 80, 0, 4); // Set the cursor position to (80,0). 将光标位置设置为(80,0) + M5.Lcd.setCursor(80, 0, + 4); // Set the cursor position to (80,0). 将光标位置设置为(80,0) M5.Lcd.print("4-RELAY UNIT\n\n"); M5.Lcd.print(" Relay State: \n Sync Mode: "); M5.Lcd.setCursor(0, 220, 2); M5.Lcd.print("Independent switch Sync/Async ALL relay"); + relay.begin(); relay.Init(0); // Set the lamp and relay to asynchronous mode(Async = // 0,Sync = 1). 将灯和继电器设为非同步模式 } @@ -50,16 +51,15 @@ char count_i = 0; bool sync_flag = 0, all_flag = 0; void loop() { - M5.update(); // Check button down state. 检测按键按下状态 + M5.update(); // Check button down state. 检测按键按下状态 if (M5.BtnA.wasPressed()) { // If button A is pressed. 如果按键A按下 M5.Lcd.fillRect(160, 50, 100, 20, BLACK); M5.Lcd.setCursor(160, 50, 4); if (count_i < 4) { M5.Lcd.printf("%d ON", count_i + 1); if (sync_flag) { - relay.relayWrite( - count_i, - 1); // Open the relay at Count_i. 打开count_i处的继电器 + relay.relayWrite(count_i, + 1); // Open the relay at Count_i. 打开count_i处的继电器 } else relay.ledWrite(count_i, 1); // Turn on count_I to get led lights. @@ -71,9 +71,8 @@ void loop() { (count_i - 4), 0); // Close the relay at Count_i. 关闭count_i处的继电器 } else - relay.ledWrite( - (count_i - 4), - 0); // Turn off the COUNt_I leds. 关闭count_i出得led灯 + relay.ledWrite((count_i - 4), + 0); // Turn off the COUNt_I leds. 关闭count_i出得led灯 } count_i++; if (count_i >= 8) count_i = 0;