bladeRF.h

/*
 * Copyright (c) 2013 Nuand LLC
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#ifndef _INCLUDED_BLADE_H_
#define _INCLUDED_BLADE_H_

#include <stdint.h>
#include "cyu3externcstart.h"
#include "cyu3types.h"
#include "cyu3usbconst.h"
#include "cyu3dma.h"
#include "../firmware_common/bladeRF.h"

#define BLADE_GPIF_16_32BIT_CONF_SELECT (0)

#define BLADE_DMA_BUF_COUNT      (2)
#define BLADE_DMA_TX_SIZE        (0)
#define BLADE_DMA_RX_SIZE        (0)
#define BLADE_THREAD_STACK       (0x0400)
#define BLADE_THREAD_PRIORITY    (8)

// interface #3
#define BLADE_FPGA_EP_PRODUCER          0x02
#define BLADE_FPGA_CONFIG_SOCKET        CY_U3P_UIB_SOCKET_PROD_2

// interface #1
#define BLADE_RF_SAMPLE_EP_PRODUCER     0x01
#define BLADE_RF_SAMPLE_EP_PRODUCER_USB_SOCKET CY_U3P_UIB_SOCKET_PROD_1
#define BLADE_UART_EP_PRODUCER          0x02
#define BLADE_UART_EP_PRODUCER_USB_SOCKET CY_U3P_UIB_SOCKET_PROD_2

#define BLADE_RF_SAMPLE_EP_CONSUMER     0x81
#define BLADE_RF_SAMPLE_EP_CONSUMER_USB_SOCKET CY_U3P_UIB_SOCKET_CONS_1
#define BLADE_UART_EP_CONSUMER          0x82
#define BLADE_UART_EP_CONSUMER_USB_SOCKET CY_U3P_UIB_SOCKET_CONS_2

// interface #2
// doesn't actually use BULK, EP exists for debugging purposes

/* Extern definitions for the USB Descriptors */
extern const uint8_t CyFxUSB20DeviceDscr[];
extern const uint8_t CyFxUSB30DeviceDscr[];
extern const uint8_t CyFxUSBDeviceQualDscr[];
extern const uint8_t CyFxUSBFSConfigDscr[];
extern const uint8_t CyFxUSBHSConfigDscr[];
extern const uint8_t CyFxUSBBOSDscr[];
extern const uint8_t CyFxUSBSSConfigDscr[];
extern const uint8_t CyFxUSBStringLangIDDscr[];
extern const uint8_t CyFxUSBManufactureDscr[];
extern const uint8_t CyFxUSBProductDscr[];

#include "cyu3externcend.h"

CyU3PReturnStatus_t CyFxSpiEraseSector(CyBool_t /* isErase */, uint8_t /* sector */);
void NuandGPIOReconfigure(CyBool_t /* fullGpif */, CyBool_t /* warm */);
CyU3PReturnStatus_t ClearDMAChannel(uint8_t ep, CyU3PDmaChannel * handle,
                                    uint32_t count);
void CyFxAppErrorHandler(CyU3PReturnStatus_t apiRetStatus);
void NuandAllowSuspend(CyBool_t set_allow_suspend);

extern uint32_t glAppMode;

struct NuandApplication {
    void (*start)(void);
    void (*stop)(void);
    CyBool_t (*halt_endpoint)(CyBool_t set, uint16_t endpoint);
    CyBool_t (*halted)(uint16_t endpoint, uint8_t *data);
    CyU3PReturnStatus_t (*reset_endpoint)(uint8_t endpoint);
};

#define GPIO_nSTATUS    52
#define GPIO_nCONFIG    51
#define GPIO_CONFDONE   50

#define GPIO_LED        58
#define GPIO_ID         59

#define GPIO_SYS_RST    24
#define GPIO_RX_EN      21
#define GPIO_TX_EN      22

#define MODE_NO_CONFIG   0
#define MODE_FPGA_CONFIG 1
#define MODE_RF_CONFIG   2
#define MODE_FW_CONFIG   3


#endif