Control EEP A5:20:01 with a better thermostat or similar integration - Setpoint is no climate sensor

[heikosommer1]

Hello! Has someone an idea how I could control the iTRV with EEP A5:20:01 with the "better thermostat"? It requires an climate entity to control the set_point-Temperature. But for A5:20:01 the config_t_setpoint entity is a "number", so it's not accepted.
I tried to replace "number" by "climate" in the mapping.yaml. But then it has no temperature range but only a switch on/off function.
One of the reasons is, that I have some Micropelt MVA002 and it seems that it's not possible to control it using an external termperature sensor. I can set the setpoint termperature and the valve percentage. But to control it I would a PID controler which I also can not find.
I'm not sure if the HASmartThermostat would work properly as the repository is declined by HACS when I try to add it.
I would appreciate a lot, if I someone good give me some hints.
Heiko

[heikosommer1]

Hello, yesterday I was really desperate, so that I wrote this post. But I just found the solution. Smart Thermostate is not an AddOn, it's a standard integreation can be found in HACS.
With this I now could create a climate with platform smart_thermostat. and connected it with the config_valve_position and an external temperature sensor. I had to set parameter pwd to 0 to force seting the percentage instead of on/off and it runs.
I know it's not an direcetly an topic for enoceanmqtt but probably someone else has a similar problem and is happy to find this hint.