weewx.conf

# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2022 Tom Keffer <tkeffer@gmail.com>
# See the file LICENSE.txt for your rights.

##############################################################################

# This section is for general configuration information.

# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0

# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx

# Whether to log successful operations. May get overridden below.
log_success = True

# Whether to log unsuccessful operations. May get overridden below.
log_failure = True

# Do not modify this. It is used when installing and updating weewx.
version = 4.8.0

##############################################################################

#   This section is for information about the station.

[Station]

    # Description of the station location
    location = "My Little Town, Oregon"

    # Latitude in decimal degrees. Negative for southern hemisphere
    latitude = 0.00
    # Longitude in decimal degrees. Negative for western hemisphere.
    longitude = 0.00

    # Altitude of the station, with the unit it is in. This is used only
    # if the hardware cannot supply a value.
    altitude = 700, foot    # Choose 'foot' or 'meter' for unit

    # Set to type of station hardware. There must be a corresponding stanza
    # in this file, which includes a value for the 'driver' option.
    station_type = unspecified

    # If you have a website, you may specify an URL. This is required if you
    # intend to register your station.
    #station_url = http://www.example.com

    # The start of the rain year (1=January; 10=October, etc.). This is
    # downloaded from the station if the hardware supports it.
    rain_year_start = 1

    # Start of week (0=Monday, 6=Sunday)
    week_start = 6

##############################################################################

#   This section is for uploading data to Internet sites

[StdRESTful]

    # Uncomment and change to override logging for uploading services.
    # log_success = True
    # log_failure = True

    [[StationRegistry]]
        # To register this weather station with weewx, set this to true,
        # then fill out option 'station_url' above.
        register_this_station = false

    [[AWEKAS]]
        # This section is for configuring posts to AWEKAS.

        # If you wish to post to AWEKAS, set the option 'enable' to true, then specify a username
        # and password. To guard against parsing errors, put the password in quotes.
        enable = false
        username = replace_me
        password = replace_me

    [[CWOP]]
        # This section is for configuring posts to CWOP.

        # If you wish to post to CWOP, set the option 'enable' to true,
        # then specify the station ID (e.g., CW1234).
        enable = false
        station = replace_me
        # If this is an APRS (radio amateur) station, specify the
        # passcode (e.g., 12345). Otherwise, ignore.
        passcode = replace_me


    [[PWSweather]]
        # This section is for configuring posts to PWSweather.com.

        # If you wish to post to PWSweather.com, set the option 'enable' to true, then specify a
        # station and password. To guard against parsing errors, put the password in quotes.
        enable = false
        station = replace_me
        password = replace_me

    [[WOW]]
        # This section is for configuring posts to WOW.

        # If you wish to post to WOW, set the option 'enable' to true, then specify a station and
        # password. To guard against parsing errors, put the password in quotes.
        enable = false
        station = replace_me
        password = replace_me

    [[Wunderground]]
        # This section is for configuring posts to the Weather Underground.

        # If you wish to post to the Weather Underground, set the option 'enable' to true,  then
        # specify a station (e.g., 'KORHOODR3') and password. To guard against parsing errors, put
        # the password in quotes.
        enable = false
        station = replace_me
        password = replace_me

        # If you plan on using wunderfixer, set the following
        # to your API key:
        api_key = replace_me

        # Set the following to True to have weewx use the WU "Rapidfire"
        # protocol. Not all hardware can support it. See the User's Guide.
        rapidfire = False

##############################################################################

#   This section specifies what reports, using which skins, to generate.

[StdReport]

    # Where the skins reside, relative to WEEWX_ROOT
    SKIN_ROOT = skins

    # Where the generated reports should go, relative to WEEWX_ROOT
    HTML_ROOT = public_html

    # Uncomment and change to override logging for reports
    # log_success = True
    # log_failure = True

    # The database binding indicates which data should be used in reports.
    data_binding = wx_binding

    # Each of the following subsections defines a report that will be run.
    # See the customizing guide to change the units, plot types and line
    # colors, modify the fonts, display additional sensor data, and other
    # customizations. Many of those changes can be made here by overriding
    # parameters, or by modifying templates within the skin itself.

    [[SeasonsReport]]
        # The SeasonsReport uses the 'Seasons' skin, which contains the
        # images, templates and plots for the report.
        skin = Seasons
        enable = true

    [[SmartphoneReport]]
        # The SmartphoneReport uses the 'Smartphone' skin, and the images and
        # files are placed in a dedicated subdirectory.
        skin = Smartphone
        enable = false
        HTML_ROOT = public_html/smartphone

    [[MobileReport]]
        # The MobileReport uses the 'Mobile' skin, and the images and files
        # are placed in a dedicated subdirectory.
        skin = Mobile
        enable = false
        HTML_ROOT = public_html/mobile

    [[StandardReport]]
        # This is the old "Standard" skin. By default, it is not enabled.
        skin = Standard
        enable = false

    [[FTP]]
        # FTP'ing the results to a webserver is treated as just another report,
        # albeit one with an unusual report generator!
        skin = Ftp

        # If you wish to use FTP, set "enable" to "true", then
        # fill out the next four lines.
        # Use quotes around passwords to guard against parsing errors.
        enable = false
        user = replace_me
        password = replace_me
        server = replace_me    # The ftp server name, e.g, www.myserver.org
        path = replace_me    # The destination directory, e.g., /weather

        # Set to True for an FTP over TLS (FTPS) connection. Not all servers
        # support this.
        secure_ftp = False

        # To upload files from something other than what HTML_ROOT is set
        # to above, specify a different HTML_ROOT here.
        #HTML_ROOT = public_html

        # Most FTP servers use port 21
        port = 21

        # Set to 1 to use passive mode, zero for active mode
        passive = 1

    [[RSYNC]]
        # rsync'ing to a webserver is treated as just another report
        skin = Rsync

        # If you wish to use rsync, you must configure passwordless ssh using
        # public/private key authentication from the user account that weewx
        # runs to the user account on the remote machine where the files
        # will be copied.
        #
        # If you wish to use rsync, set "enable" to "true", then
        # fill out server, user, and path.
        # The server should appear in your .ssh/config file.
        # The user is the username used in the identity file.
        # The path is the destination directory, such as /var/www/html/weather.
        # Be sure that the user has write permissions on the destination!
        enable = false
        server = replace_me
        user = replace_me
        path = replace_me

        # To upload files from something other than what HTML_ROOT is set
        # to above, specify a different HTML_ROOT here.
        #HTML_ROOT = public_html

        # Rsync can be configured to remove files from the remote server if
        # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
        # make a mistake in the remote path, you could could unintentionally
        # cause unrelated files to be deleted. Set to 1 to enable remote file
        # deletion, zero to allow files to accumulate remotely.
        delete = 0

    # Options in the [[Defaults]] section below will apply to all reports.
    # What follows are a few of the more popular options you may want to
    # uncomment, then change.
    [[Defaults]]

        # Which language to use for all reports. Not all skins support all languages.
        # You can override this for individual reports.
        lang = en

        # Which unit system to use for all reports. Choices are 'us', 'metric', or 'metricwx'.
        # You can override this for individual reports.
        unit_system = us

        [[[Units]]]

            # Option "unit_system" above sets the general unit system, but overriding specific unit
            # groups is possible. These are popular choices. Uncomment and set as appropriate.
            # NB: The unit is always in the singular. I.e., 'mile_per_hour',
            # NOT 'miles_per_hour'
            [[[[Groups]]]]
                # group_altitude     = meter              # Options are 'foot' or 'meter'
                # group_pressure     = mbar               # Options are 'inHg', 'mmHg', 'mbar', or 'hPa'
                # group_rain         = mm                 # Options are 'inch', 'cm', or 'mm'
                # group_rainrate     = mm_per_hour        # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
                # group_temperature  = degree_C           # Options are 'degree_C', 'degree_F', or 'degree_K'
                # The following line is used to keep the above lines indented properly.
                # It can be ignored.
                unused = unused

            # Uncommenting the following section frequently results in more
            # attractive formatting of times and dates, but may not work in
            # your locale.
            [[[[TimeFormats]]]]
                # day        = %H:%M
                # week       = %H:%M on %A
                # month      = %d-%b-%Y %H:%M
                # year       = %d-%b-%Y %H:%M
                # rainyear   = %d-%b-%Y %H:%M
                # current    = %d-%b-%Y %H:%M
                # ephem_day  = %H:%M
                # ephem_year = %d-%b-%Y %H:%M
                # The following line is used to keep the above lines indented properly.
                # It can be ignored.
                unused = unused

        [[[Labels]]]
            # Users frequently change the labels for these observation types
            [[[[Generic]]]]
                # inHumidity     = Inside Humidity
                # inTemp         = Inside Temperature
                # outHumidity    = Outside Humidity
                # outTemp        = Outside Temperature
                # extraTemp1     = Temperature1
                # extraTemp2     = Temperature2
                # extraTemp3     = Temperature3
                # The following line is used to keep the above lines indented properly.
                # It can be ignored.
                unused = unused

##############################################################################

#   This service acts as a filter, converting the unit system coming from
#   the hardware to a unit system in the database.

[StdConvert]

    # The target_unit affects only the unit system in the database. Once
    # chosen it cannot be changed without converting the entire database.
    # Modification of target_unit after starting weewx will result in
    # corrupt data - the database will contain a mix of US and METRIC data.
    #
    # The value of target_unit does not affect the unit system for
    # reporting - reports can display US, Metric, or any combination of units.
    #
    # In most cases, target_unit should be left as the default: US
    #
    # In particular, those migrating from a standard wview installation
    # should use US since that is what the wview database contains.

    # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
    target_unit = US    # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

#   This section can adjust data using calibration expressions.

[StdCalibrate]

    [[Corrections]]
        # For each type, an arbitrary calibration expression can be given.
        # It should be in the units defined in the StdConvert section.
        # Example:
        foo = foo + 0.2

##############################################################################

#   This section is for quality control checks. If units are not specified,
#   values must be in the units defined in the StdConvert section.

[StdQC]

    [[MinMax]]
        barometer = 26, 32.5, inHg
        pressure = 24, 34.5, inHg
        outTemp = -40, 120, degree_F
        inTemp = 10, 120, degree_F
        outHumidity = 0, 100
        inHumidity = 0, 100
        windSpeed = 0, 120, mile_per_hour
        rain = 0, 10, inch

##############################################################################

#   This section controls the origin of derived values.

[StdWXCalculate]

    [[Calculations]]
        # How to calculate derived quantities.  Possible values are:
        #  hardware        - use the value provided by hardware
        #  software        - use the value calculated by weewx
        #  prefer_hardware - use value provide by hardware if available,
        #                      otherwise use value calculated by weewx

        pressure = prefer_hardware
        altimeter = prefer_hardware
        appTemp = prefer_hardware
        barometer = prefer_hardware
        cloudbase = prefer_hardware
        dewpoint = prefer_hardware
        ET = prefer_hardware
        heatindex = prefer_hardware
        humidex = prefer_hardware
        inDewpoint = prefer_hardware
        maxSolarRad = prefer_hardware
        rainRate = prefer_hardware
        windchill = prefer_hardware
        windrun = prefer_hardware

##############################################################################

#   For hardware that supports it, this section controls how often the
#   onboard clock gets updated.

[StdTimeSynch]

    # How often to check the weather station clock for drift (in seconds)
    clock_check = 14400

    # How much it can drift before we will correct it (in seconds)
    max_drift = 5

##############################################################################

#   This section is for configuring the archive service.

[StdArchive]

    # If the station hardware supports data logging then the archive interval
    # will be downloaded from the station. Otherwise, specify it (in seconds).
    archive_interval = 300

    # If possible, new archive records are downloaded from the station
    # hardware. If the hardware does not support this, then new archive
    # records will be generated in software.
    # Set the following to "software" to force software record generation.
    record_generation = hardware

    # Whether to include LOOP data in hi/low statistics
    loop_hilo = True

    # Uncomment and change to override logging for archive operations
    # log_success = True
    # log_failure = True

    # The data binding used to save archive records
    data_binding = wx_binding

##############################################################################

#   This section binds a data store to a database.

[DataBindings]

    [[wx_binding]]
        # The database must match one of the sections in [Databases].
        # This is likely to be the only option you would want to change.
        database = archive_sqlite
        # The name of the table within the database
        table_name = archive
        # The manager handles aggregation of data for historical summaries
        manager = weewx.manager.DaySummaryManager
        # The schema defines the structure of the database.
        # It is *only* used when the database is created.
        schema = schemas.wview_extended.schema

##############################################################################

#   This section defines various databases.

[Databases]

    # A SQLite database is simply a single file
    [[archive_sqlite]]
        database_name = weewx.sdb
        database_type = SQLite

    # MySQL
    [[archive_mysql]]
        database_name = weewx
        database_type = MySQL

##############################################################################

#   This section defines defaults for the different types of databases.

[DatabaseTypes]

    # Defaults for SQLite databases
    [[SQLite]]
        driver = weedb.sqlite
        # Directory in which the database files are located
        SQLITE_ROOT = %(WEEWX_ROOT)s/archive

    # Defaults for MySQL databases
    [[MySQL]]
        driver = weedb.mysql
        # The host where the database is located
        host = localhost
        # The user name for logging in to the host
        user = weewx
        # The password (use quotes to guard against parsing errors)
        password = weewx

##############################################################################

#   This section configures the internal weewx engine.

[Engine]

    # The following section specifies which services should be run and in what order.
    [[Services]]
        prep_services = weewx.engine.StdTimeSynch
        data_services = ,
        process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
        xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta
        archive_services = weewx.engine.StdArchive
        restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
        report_services = weewx.engine.StdPrint, weewx.engine.StdReport