diff --git a/docs/lumen/pack-out/img/IMG_5122.jpg b/docs/lumen/pack-out/img/IMG_5122.jpg index 3094d47..cbd1e1c 100644 --- a/docs/lumen/pack-out/img/IMG_5122.jpg +++ b/docs/lumen/pack-out/img/IMG_5122.jpg @@ -1,3 +1,3 @@ version https://git-lfs.github.com/spec/v1 -oid sha256:b48042abd385f7d7d824702f133eeaaa50f3d0aa22d841acfb619c861d765b70 -size 1261486 +oid sha256:b7a1c847990f3cae90fc603942d92e7a44727e5e0d12c5ed5aea90c801b447db +size 1187981 diff --git a/docs/lumen/pack-out/img/lower-tray-v3.1.jpg b/docs/lumen/pack-out/img/lower-tray-v3.1.jpg index f3bdcc8..2428b70 100644 --- a/docs/lumen/pack-out/img/lower-tray-v3.1.jpg +++ b/docs/lumen/pack-out/img/lower-tray-v3.1.jpg @@ -1,3 +1,3 @@ version https://git-lfs.github.com/spec/v1 -oid sha256:c5b26db216dbfe34a6e5049bd172461cbf83204eb777f6b26fb04ef776194906 -size 1082639 +oid sha256:9544543eff1c4ae1e2d589b717e98404400a750faf21607559532c3de1bb3905 +size 544063 diff --git a/docs/lumen/pack-out/img/slotcable.jpg b/docs/lumen/pack-out/img/slotcable.jpg new file mode 100644 index 0000000..b9806ff --- /dev/null +++ b/docs/lumen/pack-out/img/slotcable.jpg @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:393fcb4fa82b8d8165e87b484d9d7769b8115d1a3f08cc9aed8dfc5f9d4cedbc +size 1000397 diff --git a/docs/lumen/pack-out/index.md b/docs/lumen/pack-out/index.md index e94c6bc..ff1d84b 100644 --- a/docs/lumen/pack-out/index.md +++ b/docs/lumen/pack-out/index.md @@ -10,6 +10,7 @@ * `Tool-kit` * `2x front-leg-extension` * `2x back-leg-extension` + * `feeder-slot-cable-harness` 1. Insert `tool-kit` into the middle region of the tray * Orient the `tool-kit` so the Opulo logo faces towards the `x-gantry` @@ -35,6 +36,10 @@ 1. Insert 2x `front-leg-extension` into the tray ![](img/frontlegextension.jpg) + +1. Insert `feeder-slot-cable-harness` into the tray + + ![](img/slotcable.jpg) 1. Confirm the lower foam tray matches the image shown below before continuing: @@ -56,7 +61,6 @@ * `power-cable` * `front-feeder-rail`(w/25 feeder slots installed) * `rear-feeder-rail` (w/25 feeder slots installed) - * `feeder-slot-cable-harness` * `Bagged-10x-extrusion-cable-clips` 1. Insert the following into the right-side cavity of the foam tray: