Skip to content

Latest commit

 

History

History
3564 lines (2935 loc) · 172 KB

CHANGELOG.md

File metadata and controls

3564 lines (2935 loc) · 172 KB
Raw

Changelog

All notable changes to this project will be documented in this file.

[Unreleased] - Development

[10.0.0.4]

Added

  • (Internal) Support for FUNC_BUTTON_MULTI_PRESSED in (light)drivers
  • Support for GPE Multi color smart light as sold by Action in the Netherlands

Changed

  • (Internal) Range conversion edge values

Fixed

  • Tuya dimmer range issue (#13849)

[10.0.0.3] 20211130

Added

  • Shutter support for venetian blinds with tilt control
  • ESP32 Autoconfiguration
  • ESP32 fix leftover GPIO configuration after restart
  • ESP32 Proof of Concept Sonoff SPM with limited functionality (switching and energy monitoring) (#13447)
  • WS2812 scheme 13 stairs effect (#13595)
  • ESP32 Preliminary support for Tasmota Apps (.tapp extesions)
  • ESP32 Berry support for neopixel (WS2812, SK6812)
  • Command IfxPeriod to overrule Teleperiod for Influx messages (#13750)
  • ESP32 OTA over HTTPS
  • ESP32 Berry import re regex module
  • ESP32 HTTPS support to WebQuery

Changed

  • ESP8266 Gratuitous ARP enabled and set to 60 seconds (#13623)
  • Removed ILI9488 driver in favor of Unversal Display Driver
  • IRremoteESP8266 library from v2.7.20 to v2.8.0 (#13738)
  • Ethernet hostname ending in _eth to -eth according to RFC952
  • ESP32 core library from v2.0.1 to v2.0.1.1 (#13768)

Fixed

  • ESP32 analog NTC temperature calculation (#13703)
  • ESP32 ethernet broken by core 2.x
  • ESP32 I2C clock stretch issue (#13768)

Removed

  • ILI9488 driver in favour of Universal Display driver (#13719)

[10.0.0.2] 20211113

Added

  • Support for HDC2010 temperature/humidity sensor by Luc Boudreau (#13633)

Breaking Changed

  • ESP32-S2 TSettings memory usage fixed to 4096 bytes regression from v9.5.0.8

Changed

  • ESP32 core library from v1.0.7.5 to v2.0.1

[10.0.0.1]

Added

  • Berry add module python_compat to be closer to Python syntax (#13428)
  • 1 second heartbeat GPIO
  • Command TcpConfig for TCPBridge protocol configuration (#13565)

Changed

  • File editor no-wrap (#13427)
  • ESP32 core library from v1.0.7.4 to v1.0.7.5
  • ESP32-C3 core library from v2.0.0-post to v2.0.1-rc1

Fixed

  • Initial reset RTC memory based variables like EnergyToday and EnergyTotal
  • ESP32 Telegram compile error (#13435)
  • SML compile error (#13441)
  • GUI checkbox MQTT TLS not saved regression from v9.2.0.3 (#13442)
  • Discovery of shutters (#13572)
  • ESP32-C3 OneWire as used by DS18x20 (#13583)

[Released]

[10.0.0] 20211019

  • Release Norman

[9.5.0.9] 20211019

Added

  • Command SetOption129 1 to enable split total energy results (#13030)
  • Command SetOption130 1 adding heap size (and ESP32 fragmentation) to logging timestamp for debugging
  • Commands EnergyTotal<phase>, EnergyToday<phase> and EnergyYesterday<phase> to (re)set energy values
  • Commands EnergyUsage and EnergyExport to (re)set energy usage and export values
  • Berry add module import persist
  • Support for BL0942 energy monitor (#13259)
  • Support for HM330X SeedStudio Grove Particule sensor (#13250)

Breaking Changed

  • ESP32 LVGL updated to v8.0.2

Changed

  • Removed command EnergyReset as it is replaced by new commands
  • Files starting with underscore in file system are no more hidden
  • ESP32 Memory display to exclude IRAM (i.e. less by 40-50KB) (#13294)
  • LVGL Berry namespace lv.* added and removed lv_* constants

Fixed

  • ESP32 restore GPIO16/17 if no PSRAM was found regression from v9.5.0.3
  • Restore functionality as documented when both GPIO_LED1 and GPIO_LED2 are used regression from v8.5.0 (#13368)

[9.5.0.8] 20210927

Added

  • Command WebGetConfig <url> if #define USE_WEBGETCONFIG is enabled to restore/init configuration from external webserver (#13034)
  • Berry class webclient for HTTP/HTTPS requests
  • Support for ESP32S2 GPIOs
  • ESP32 add GPIO 6/7/8/11 to template and remove GPIO 28-31 (remapping so backwards compatible)
  • Crash recorder Status 12 for ESP32/ESP32S2/ESP32C3, supporting Esp-idf 3.3/4.4
  • Support for ESP32/ESP32S2 DAC gpio via Berry
  • Berry support for Serial
  • Support for Sensirion SCD40/SCD41 CO2 sensor (#13139)
  • Support for BL0939 energy monitor as used in ESP32 based Sonoff Dual R3 V2 Pow (#13195)
  • Command WebQuery <url> GET|POST|PUT|PATCH [<headers>] <body> to extent HTTP requests (#13209)
  • Berry print stack trace when exception, more detailed with line numbers if #define USE_BERRY_DEBUG

Changed

  • M5 Stack Core2 uses UNIVERSAL_DISPLAY with enabled LVGL as default now
  • DisplayDimmer has now range 0..100 instead of 0..15
  • Minimum PWM Frequency lowered to 2Hz on ESP32 (#13123)
  • Use Tasmota Arduino Core32 1.0.7.4 for ESP32 builds (#13154)
  • Shrinked Webcam build, uses now USE_TASMOTA_DISCOVERY (#13148)
  • Berry revamped energy module to expose all C variables to Berry (read/write)

Fixed

  • OpenTherm invalid JSON (#13028)
  • ESP32 crash when PSRAM is absent and BOARD_HAS_PSRAM set (#13037)
  • MQTT TLS related connection timing errors (#13033)

[9.5.0.7] 20210901

Added

  • Turn HTTP API (command SetOption128 1) default on for backward compatibility
  • Support for IEM3155 Wattmeter (#12940)
  • Berry support for vararg
  • Command Subscribe2 ... to subscribe to a MQTT topic without appended "/#" (#12858)
  • Support for Hydreon RG-15 Solid State Rain sensor (#12974)
  • Support for IKEA VINDRIKTNING particle concentration sensor (#12976)
  • Berry support for Curve 25519 EC crypto
  • Command SetOption2 1 to enable display of global temperature/humidity/pressure info to JSON sensor message

Changed

  • Shelly EM template needs to use GPIO ADE7953_IRQ_2
  • IRremoteESP8266 library from v2.7.19 to v2.7.20

Fixed

  • WDT reset on shutters with stepper motors during deceleration (#12849)
  • Shelly 2.5 negative power values on relay 1 regression from 9.5.0.5
  • Wiegand support for keypad zero key in single key mode using SetOption124 1 (#12960)
  • Hass and Tasmota discovery prefix topic notifications (#12972)
  • Unable to disable MusicSync mode on Sonoff L1 Lite regression from 9.3.0 (#12930)
  • Shelly Dimmer 2 Energy usage (#12815)
  • Sonoff L1 (lite) smoother color transitions

[9.5.0.6] 20210820

Added

  • Version bump to monitor possible HTTP issues releated to SetOption128

Changed

  • Berry now compiling in strict mode to catch more bugs

Fixed

  • Fixed PWM5 on ESP32C3

[9.5.0.5] 20210815

Added

  • Inital support for Wi-Fi extender (#12784)
  • Neopool commands NPPHRes, NPCLRes and NPIonRes (#12813)
  • Support for (Yeelight) Mi Desk Pro using binary tasmota32solo1.bin
  • Initial support for influxdb using #define USE_INFLUXDB and several Ifx commands
  • Command SetOption128 1 disabling web referer check default blocking HTTP web commands (#12828)

Changed

  • NeoPixelBus library from v2.6.3 to v2.6.7
  • Make Sonoff L1 MusicSync persistent (#12008)
  • Relax NTP poll if no ntpserver can be resolved by DNS
  • Move firmware binaries to https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
  • Default disable CORS for enhanced security and provide user compile option #define USE_CORS (#12827)
  • Prometheus: All metrics are prefixed with tasmota_ (#12842) Memory metrics have been cleaned up to work consistently between ESP8266 and ESP32 The device name is reported as an info metric

Fixed

  • Neopool communication error (#12813)
  • Negative power values for ADE7953 based devices like Shelly EM (#12874)

[9.5.0.4] 20210801

Added

  • Support for second DNS server
  • Optional IP filter to command TCPStart (#12806)

Changed

  • ESP8266Audio library from v1.5.0 to v1.9.2

[9.5.0.3] 20210729

Added

  • Command SetSensor1..127 0|1 to globally disable individual sensor driver
  • Support for CAN bus and Freedom Won Battery Management System by Marius Bezuidenhout (#12651)
  • Berry ESP32 support for I2S audio mp3 playback
  • Berry add module introspect
  • Berry add tasmota.wifi() and tasmota.eth()
  • LVGL new widget lv_wifi_bars

Changed

  • ESP32 core library from v1.0.7.1 to v1.0.7.3
  • Disable PSRAM on unsupported hardware
  • Replace spaces by hyphens in final hostname (#12710)
  • Message Upload buffer miscompare into Not enough space
  • ESP32 remove GPIO initialization to INPUT from not used GPIOs to allow JTAG support

Fixed

  • Discovery fails when using %hostname% in a topic (#12710)
  • ESP32-Solo OTA upgrade
  • ESP32 buzzer in PWM mode exception (#12717)

[9.5.0.2] 20210714

Added

  • Initial support for Tasmota Mesh (TasMesh) providing node/broker communication using ESP-NOW (#11939)
  • MQTT minimum password length restriction in GUI (#12553)
  • Command SetOption127 1 to force Wi-Fi in no-sleep mode even if Sleep 0 is not enabled
  • Support for Technoline WS2300-15 Anemometer (#12573)
  • Support for Telaire T6700 Series CO2 sensor by Alexander Savchenko (#12618)

Changed

  • ESP32 core library from v1.0.7 to v1.0.7.1
  • IRremoteESP8266 library from v2.7.18 to v2.7.19
  • ESP32 Ethernet Phy Type information to IDF v3+
  • Allow buttons to work in AP normal mode (#12518)
  • Enable Ping and rule features for any device compiled with more than 1M flash size (#12539)
  • ESP32 internal sensor driver id moved from 87 to 127
  • Extended supported sensor driver range to 128

Fixed

  • ESP32-C3 settings layout for configuration backup and restore
  • ESP32 core v2.0.0 setting hostname
  • Berry button handlers and error messages (#12521)
  • Scripter and Display MQTT errors due to MQTT_DATA move to String (#12525)
  • Scripter moving average and sml input validation (#12541)
  • Zigbee Hue angle encoding (#12545)
  • AM2320 value reporting (#12552)
  • Exception 28 when unable to send MQTT message and a topic name without a slash '/' (#12555)
  • Wi-Fi initial setup workaround for 11n only routers (#12566)
  • ESP32 do not use chip temperature sensor as global temperature if external temperature sensor is used (#12630)

[9.5.0.1] 20210701

Added

  • Berry ESP32 partition manager (#12465)
  • Rule event support as JSON payload (#12496)
  • Support for AM2320 Temperature and Humidity Sensor by Lars Wessels (#12485)

Changed

  • ESP32 core library from v1.0.6 to v1.0.7
  • Speed up initial GUI console refresh
  • Enable UFILESYS, GUI_TRASH_FILE and GUI_EDIT_FILE for any device compiled with more than 1M flash size
  • Simplified configuration for ir-full and removal of tasmota-ircustom
  • Refactor platformio (#12442)

Fixed

  • ESP32 Webcam add boundary marker before sending mjpeg image (#12376)
  • DDS238-2 wrong reactive power value (#12283)
  • NO VALID JSON regression from may 4th (#12440)
  • Telegram response decoding stopped working after 20210621 and exception on long result message (#12451)
  • Neopool compile error on DEBUG_TASMOTA_SENSOR (#12464)

[9.5.0] 20210617

  • Release Michael (Rossi)

[9.4.0.6] 20210617

Added

  • Command MqttWifiTimeout 100..20000 to control MQTT Wi-Fi connection timeout default set to 200 mS (#12222)

[9.4.0.5] 20210615

Added

  • Preliminary support for Esp32C3 - RiscV based

Changed

  • NeoPixelBus library from v2.6.1.4 to v2.6.3 stage
  • Allow longer MQTT response messages by removing fixed memory buffer with size 1040 to heap allocated buffer
  • Command Timers layout of JSON message changed to single line
  • Command Gpio layout of JSON message changed to single line
  • Command Modules layout of JSON message changed to single line
  • I2C extended MPU6886 to also support MPU9250 (found in Legacy M5Stack Fire)
  • ESP32 increase log buffer from 4k to 6k to support longer messages
  • Move Settings from DRAM to heap
  • WifiManager save Wi-Fi configuration from settings, do it only once (#12242)
  • Improving SI7021 reading reliability by adjusting timers (#12256)
  • Refactor ESP32 partition selection, now via boards (#12257)
  • Refactor platformio configurations by Jason2866
  • Use correct template for Home Assistant light (#12317)

[9.4.0.4] 20210610

Added

  • Version bump to signal new features to Hass
  • Command Status0 providing all status information on a single line
  • LVGL support for PNG images (#12148)
  • Update Sugar Valley Neopool driver (#12171)
  • Acer projector support (#12190)
  • I2S and Interrupt GPIO types (#12192)
  • Update OpenTherm driver (#12195)
  • Support for BM8563 RTC chip (I2C) found in M5Stack Core2 and M5StickC (#12199)
  • Command TuyaSend5 for hex string (#12211)
  • Extend command Wifi with Wi-Fi Mode Control (#12292)

Changed

  • IRremoteESP8266 library from v2.7.16 to v2.7.18

Fixed

  • PING race condition breaks JSON in rule (#12106)
  • Support Tuya powermeter >6500W (#12115)
  • Zigbee max end-device (#12159)
  • Prevent keep state MCP230xx output fast toggle on reboot (#12264)
  • Tuya data type 2 read as 32 bit integer (instead of 16 bit) (#12282)

[9.4.0.3] 20210515

Added

  • Make Telegram command TmState persistent (#11965)
  • Zigbee firmware for Tube's Zigbee coordinator based on EFR32 and ESP32
  • Zigbee firmware 6.7.9 for Sonoff ZBBridge
  • Defines USER_RULE1, USER_RULE2 and USER_RULE3 to store rules at compile time
  • Define USER_BACKLOG to store commands at compile time to be executed at firmware load or when executing command reset
  • LVGL support for 3 buttons as rotary encoder (#12035)
  • LVGL support for touchscreen (#12039)
  • Allow home assistant discovery of MCP2300xx output as relay (#12037)
  • LVGL support for TrueType fonts via FreeType library (#12087)
  • LVGL support for PSRAM (#12062)
  • Support for voltage and current monitoring when using Shelly dimmer 2 hardware (#11988)
  • Support for Azure Device Provisioning Service for IoT Hub (#12056)
  • Commands Color2 and Dimmer4 to allow retaining brightness ratio between white and color channels when setting dimmer for linked lights (#12072)
  • Show new IP after the Wi-Fi Initial Config (#12091)

Fixed

  • Avoid erasing of Zigbee data if zigbee is not started (#11961)
  • Zigbee XModem retries (#11967)
  • Teleinfo standard mode and blacklist feature crash (#11991)
  • ESP32 Hue light (#12005)
  • Map received CCT channels back in DevGroups (#12044)
  • Increase TLS minimum stack thunk to 3800 bytes (#12063)
  • Delay discovery of PZEM sensors (#12076)

Changed

  • Shelly Dimmer 1 and 2 stm32 firmware from v51.5 to v51.6

[9.4.0.2] 20210430

Added

  • Initial support for optional Template JSON fieldpair "CMND":"<any template related command>|<any template related command>|..." (#11788)
  • ESP32 pulldown buttons Button_d and Button_id and switches Switch_d (#10814)
  • Support for MQTT using Azure IoT Hub by Kevin Saye (#11906)
  • Zigbee binary supporting cc25xx hardware on 4M flash hardware (#11872)

Fixed

  • Wrong flash size detection when saving Zigbee device information on ESP8266 (#11870)
  • Prometheus metrics parse error on DS18x20 (#11931)
  • DS18x20 name search id (#11958)

[9.4.0] 20210423

  • Release Leslie

[9.4.0.1] 20210423

Added

  • Command Wifi 0/1 for ESP8266 to turn Wi-Fi Off and On. When Wi-Fi is Off it is always returned On after a restart except for a wake-up from deepsleep (#11839)

Changed

  • Zigbee refactored storage for device configuration and device last known data (#11838)

Fixed

  • Command Power should not reset pulsetime (#11805)
  • Teleperiod rule handling regression from v9.3.1.2 (#11851)

[9.3.1.4] 20210422

Added

  • Command TuyaTempSetRes 0..3 to control Tuya Temperature Set Resolution (#11781)
  • ESP32 support for LVGL 7.11 with Berry binding by Stephan Hadinger (#11789)
  • Add Input GPIO type with no default action, to be read via Berry

[9.3.1.3] 20210419

Added

  • Optional GUI file editor enabled with define GUI_EDIT_FILE by barbudor (#11668)
  • Initial support for universal display driver UDisplay by Gerhard Mutz. Enable by selecting any GPIO as Option A3 (#11665)

Breaking Changed

  • ESP32 partition layout changed to accomodate more file space on most and more code space on core2 and odroid-go (#11746)

Changed

  • In tasmota-sensors.bin enabled support for VL53L0X and disabled TSL2561 (#11711)
  • Add HLW8012/BL0937 average pulse calculation by Alex Lovett (#11722)
  • Redesigned initial GUI Wi-Fi configuration by Adrian Scillato (#11693)
  • Redesigned GUI by moving non-configuration buttons from Configuration to new submenu Consoles

Fixed

  • Telegram chat id incorrect size (#11660)
  • KNX energy yesterday (#11718)

[9.3.1.2] 20210413

Added

  • Commands MqttKeepAlive 1..100 to set Mqtt Keep Alive timer (default 30) and MqttTimeout 1..100 to set Mqtt Socket Timeout (default 4) (#5341)
  • Commands DisplayType to select sub-modules where implemented and DisplayInvert to select inverted display where implemented
  • Command SerialBuffer 256..520 to change hardware serial receive buffer size from default (256) to max local buffer size (520) (#11448)
  • Command SetOption126 1 to enable DS18x20 arithmetic mean over teleperiod for JSON temperature based on (#11472)
  • Support for TM1638 seven segment display by Ajith Vasudevan (#11031)
  • Support for MAX7219 seven segment display by Ajith Vasudevan (#11387)
  • Support for Frequency monitoring and zero-cross detection on CSE7761 (Sonoff Dual R3)
  • ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
  • Support for multiple CCS811 sensors with baseline control (USE_CCS811_V2) by clanganke (#10858)
  • Berry add gpio module
  • Berry add light module
  • Support for dummy energy monitor using user values set by commands VoltageSet, CurrentSet, PowerSet and FrequencySet. Enable by selecting any GPIO as Option A2 (#10640)
  • Command Backlog0 to allow execution of following commands without delay
  • Tasmota discovery as alternative to Home Assistant discovery using define USE_TASMOTA_DISCOVERY

Changed

  • PubSubClient library from EspEasy v2.7.12 to Tasmota v2.8.12
  • IRremoteESP8266 library from v2.7.15 to v2.7.16
  • ESP32 core library from v1.0.5 to v1.0.6
  • Limit number of relay/button columns in GUI to 8 (#11546)
  • ADC range result from int to float using command FreqRes for decimal resolution selection (#11545)
  • Teleinfo, if raw mode selected also return telemety values in SENSOR data
  • Removed overtemp detection on external energy monitoring devices (#11628)

Fixed

  • HC-SR04 on ESP32 release serial interface if not used (#11507)
  • Teleinfo, if raw mode selected also always update total energy calculations
  • Alexa discovery for ZBBridge (#11576)
  • Alexa discovery in hue emulation (#11415)

[9.3.1.1] 20210320

Added

  • Support for CSE7761 energy monitor as used in ESP32 based Sonoff Dual R3 Pow (#10793)
  • Command Sensor80 1 <0..7> to control MFRC522 RFID antenna gain from 18dB (0) to 48dB (7) (#11073)
  • Allow MCP230xx pinmode from output to input (#11104)
  • SML VBUS support (#11125)
  • Support for NEC and OPTOMA LCD/DLP Projector serial power control by Jan Bubík (#11145)
  • Support for XPT2046 touch screen digitizer on ILI9341 display by nonix (#11159)
  • Berry improvements (#11163)
  • Support for zigbee lumi.sensor_wleak (#11200)
  • Crash protection in ext_vnsprintf_P (#11202)
  • Extent compile time SetOptions support (#11204)
  • ESP32 Extent BLE (#11212)
  • ESP32 support for WS2812 hardware driver via RMT or I2S
  • ESP32 support for secondary I2C controller
  • Support for MPU6886 on primary or secondary I2C bus

Changed

  • ESP32 core library from v1.0.5-rc6 to v1.0.5
  • TasmotaSerial library from v3.2.0 to v3.3.0
  • TuyaMcu dimmer timeout (#11121)
  • Rename epaper 42 commands (#11222)
  • DeepSleep announcement topic (#11223)

Fixed

  • PN532 on ESP32 Serial flush both Tx and Rx buffers (#10910)
  • Light scheme related color changes (#11041)
  • Refactor acceleration function for shutter stepper and servo (#11088)
  • LM75AD detection on different addresses (#11096)
  • Timer loop when console is scrolled up regression from v9.3.0 (#11108)
  • Display exception when no file system is present (#11125)
  • Scripter and SML fixes (#11150)
  • Zigbee exception when bad frame is received (#11192)
  • ESP32 flash script for Odroid and Core2 (#11227)
  • ESP32 WS2812 bitbang support (#11248)
  • DS18x20 driver timing issue (#11270)

[9.3.1] 20210223

  • Release Kenneth

[9.3.0.1] 20210223

Added

  • Animate PWM dimmer brightness LEDs during transitions and with variable brightness (#11076)
  • Commands StateRetain and InfoRetain (#11084)

Changed

  • Remove the need to start filenames with a slash (/) in Ufs commands
  • Removed command VirtualCT as synonym for SetOption106 (#11049)

Fixed

  • Web request accepts wrong password (#11039)
  • Ili1942 driver (#11046)
  • ESP32 Mi32 driver (#11048)
  • Shutter driver (#11055)
  • TM1637 driver now needs TM1637 CLK and TM1637 DIO to enable (#11057)
  • Sml driver (#11082)
  • Ezo drivers (#11083)

[9.3.0] 20210219

  • Release Kenneth

[9.2.0.7] 20210219

Added

  • Support for Device Groups Device Map (#10898)
  • Support for Eastron SDM72D-M three phase 100A Modbus energy meter (#10862)
  • Support for Frysk language translations by Christiaan Heerze
  • ESP8266 Fallback to *.bin.gz binary when OTA upload of *.bin binary fails
  • Berry language improved Tasmota integration
  • Berry file system support
  • Filesystem commands Ufs, UfsType, UfsSize, UfsFree, UfsDelete, UfsRename and UfsRun
  • Support for filesystem autoexec.bat to execute sequential commands like backlog
  • Support for TM1637 seven segment display by Ajith Vasudevan (#10889)

Changed

  • IRremoteESP8266 library from v2.7.14 to v2.7.15
  • NeoPixelBus library from v2.6.0 to v2.6.1.4
  • ILI9341 library from Adafruit_ILI9341-1.2.0-Tasmota-1.0 to ILI9341-gemu-1.0

[9.2.0.6] 20210210

Changed

  • Remove support for direct migration from versions before v8.1.0 (Doris)
  • ESP32 Increase number of switch GPIOs from 8 to 28
  • ESP32 Increase number of interlock groups from 4 to 14
  • Increase number of button GPIOs from 4 to 8
  • Preview of Berry language for Tasmota32

[9.2.0.5] 20210205

Changed

  • ESP32 increase number of relay GPIOs from 8 to 28

[9.2.0.4] 20210204

Added

  • Function AddLog to provide logging for up to 128 (LOGSZ) characters to save stack space
  • Commands ChannelRemap, MultiPWM, AlexaCTRange, PowerOnFade, PWMCT, WhiteBlend and VirtualCT as synonyms for SetOption37, 68, 82, 91, 92, 105 and 106
  • Commands ZbNameKey, ZbDeviceTopic, ZbNoPrefix, ZbEndpointSuffix, ZbNoAutoBind and ZbNameTopic as synonyms for SetOption83, 89, 100, 101, 110 and 112
  • Commands ZbNoAutoBind, ZbReceivedTopic and ZbOmitDevice as synonyms for SetOption116, 118 and 119
  • Commands BuzzerActive and BuzzerPwm as synonyms for SetOption67 and 111
  • Support for ESP32 Module 5 Wireless Tag Eth01 (#9496)
  • Support trailing silence in buzzer tune (#10694)
  • Command L1MusicSync <0|Off>|<1|On>|<2|Toggle>, 1..10, 1..100> to control Sonoff L1 Music Sync mode sensitivity and speed (#10722)
  • Command Speed2 to control a once off fade (#10741)
  • Zigbee command SetOption120 1 or ZbEndpointTopic 1 to add the endpoint as suffix in topic when using SetOption89 1
  • Zigbee command ZbScan to do an energy scan on each radio channel

Changed

  • Maximum chars in AddLog_P logging restored from 128 to 700 (MAX_LOGSZ) to solve broken error messages

[9.2.0.3] 20210122

Added

  • Support for time proportioned (#define USE_TIMEPROP) and optional PID (#define USE_PID) relay control (#10412)
  • Support rotary encoder on Shelly Dimmer (#10407)
  • Command SetOption43 1..255 to control Rotary step (#10407)
  • Support for BS814A-2 8-button touch buttons by Peter Franck (#10447)
  • Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck (#10481)
  • ESP8266 Support for 2MB and up linker files with 1MB and up LittleFS
  • ESP32 support for TLS MQTT using BearSSL (same as ESP8266)
  • Support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther (#3647)
  • Compile time option USE_MQTT_TLS_DROP_OLD_FINGERPRINT to drop old (less secure) TLS fingerprint
  • Command SetOption40 0..250 to disable button functionality if activated for over 0.1 second re-introduced
  • Support for SM2135 current selection using GPIO SM2135 DAT index (#10634)
  • Support for ESP32 Module 7 M5stack core2 16MB binary tasmota32-core2.bin (#10635)
  • Support for Sugar Valley NeoPool Controller by Norbert Richter (#10637)
  • Rule trigger string comparisons for EndsWith $>, StartsWith $< and Contains $| (#10538)
  • Support for TOF10120 time of flight sensor by Cyril Pawelko (#10190)

Breaking Changed

  • ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files
  • ESP8266 until now NOT SUPPORTED linker files 2MB and up. Current settings will be overwritten once LittleFS is enabled

Changed

  • Force initial default state SetOption57 1 to scan Wi-Fi network every 44 minutes for strongest signal (#10395)
  • Command Sleep 0 removes any sleep from Wi-Fi modem except when ESP32 BLE is active
  • PubSubClient MQTT_SOCKET_TIMEOUT from 15 to 4 seconds
  • Domoticz fixed 2 decimals resolution by user selectable TempRes, HumRes and PressRes resolutions

[9.2.0.2] 20210105

Added

  • Support for ESP32 Module 3 Odroid Go 16MB binary tasmota32-odroidgo.bin (#8630)
  • Command CTRange to specify the visible CT range the bulb is capable of (#10311)
  • Command VirtualCT to simulate or fine tune CT bulbs with 3,4,5 channels (#10311)
  • Command SetOption118 1 to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default (#10353)
  • Command SetOption119 1 to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic (#10355)
  • Command RuleTimer0 to access all RuleTimers at once (#10352)
  • SPI display driver SSD1331 Color oled by Jeroen Vermeulen (#10376)
  • IRremoteESP8266 library from v2.7.13 to v2.7.14
  • Rotary No Pullup GPIO selection Rotary A/B_n (#10407)

Breaking Changed

  • Replaced MFRC522 13.56MHz rfid card reader GPIO selection from SPI CS by RC522 CS
  • Replaced NRF24L01 GPIO selection from SPI CS by NRF24 CS and SPI DC by NRF24 DC
  • Replaced ILI9341 GPIO selection from SPI CS by ILI9341 CS and SPI DC by ILI9341 DC
  • Replaced ST7789 GPIO selection from SPI CS by ST7789 CS and SPI DC by ST7789 DC
  • Replaced ILI9488 GPIO selection from SPI CS by ILI9488_CS
  • Replaced EPaper29 GPIO selection from SPI CS by EPaper29 CS
  • Replaced EPaper42 GPIO selection from SPI CS by EPaper42 CS
  • Replaced SSD1351 GPIO selection from SPI CS by SSD1351 CS
  • Replaced RA8876 GPIO selection from SPI CS by RA8876 CS

Changed

  • Maximum chars in AddLog_P logging reduced from 700 to 128 (LOGSZ) to enhance stability
  • Disabled USE_LIGHT light support for ZBBridge saving 17.6kB (#10374)

[9.2.0.1] 20201229

Added

  • Milliseconds to console output (#10152)
  • Support for P9813 RGB Led MOSFET controller (#10104)
  • Support for GPIO option selection
  • Gpio Option A1 enabling PWM2 high impedance if powered off as used by Wyze bulbs (#10196)
  • Support for FTC532 8-button touch controller by Peter Franck (#10222)
  • Support character # to be replaced by space-character in command Publish topic (#10258)
  • BSSID and Signal Strength Indicator to GUI Wi-Fi scan result (#10253)
  • Support for Afrikaans language translations by Christiaan Heerze
  • Support for IR inverted leds using #define IR_SEND_INVERTED true (#10301)
  • Support for disabling 38kHz IR modulation using #define IR_SEND_USE_MODULATION false (#10301)
  • Support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037)

Changed

  • Logging from heap to stack freeing 700 bytes RAM

Fixed

  • Redesign syslog and mqttlog using log buffer (#10164)
  • Shutter stop issue (#10170)
  • Scripter script_sub_command (#10181)
  • Scripter JSON variable above 32 chars (#10193)
  • Shelly Dimmer power on state (#10154, #10182)
  • Wemo emulation for single devices (#10165, #10194)
  • ESP32 LoadStoreError when using #define USER_TEMPLATE (#9506)
  • Compile error when #ifdef USE_IR_RECEIVE is disabled regression from 9.1.0.2
  • Prometheus memory leak (#10221)

[9.2.0] 20201216

  • Release Julie

[9.1.0.2] 20201216

Added

  • KNX read reply for Power (#9236, #9891)
  • Zigbee persistence of device/sensor data in EEPROM (only ZBBridge)
  • Support for common anode sevenseg displays by adding #define USE_DISPLAY_SEVENSEG_COMMON_ANODE by Ken Sanislo (#9963)
  • Support for multiple WeMo devices by Magic73 (#9208)
  • Fallback NTP server from x.pool.ntp.org if no ntpservers are configured
  • TyuaMcu update 2/3 by Federico Leoni (#10004)
  • Optional CCloader support for CC25xx Zigbee or CC26xx BLE by Christian Baars (#9970)
  • Command RfProtocol to control RcSwitch receive protocols by BBBits (#10063)
  • Zigbee better support for Tuya Protocol (#10074)
  • Support for SPI connected MFRC522 13.56MHz rfid card reader (#9916)
  • Letsencrypt R3 in addition to X3 CA (#10086)
  • Zigbee add visual map of network
  • Command SetOption117 1 for light fading to be fixed duration instead of fixed slew rate (#10109)
  • Support ESP32 SPIFFS for internal use

Breaking Changed

  • KNX DPT9 (16-bit float) to DPT14 (32-bit float) by Adrian Scillato (#9811, #9888)

Changed

  • Core library from v2.7.4.7 to v2.7.4.9
  • Shelly Dimmer fw upgrade using WebGUI Firmware Upgrade and file from folder tools/fw_shd_stm32/
  • MQTT Wi-Fi connection timeout from 5000 to 200 mSec (#9886)
  • Platformio compiler option -free -fipa-pta enabled (#9875)
  • IRremoteESP8266 library from v2.7.12 to v2.7.13
  • Shelly Dimmer 1 and 2 stm32 firmware from v51.4 to v51.5
  • Force bigger Thunk Stack if 4K RSA even without EC ciphers (#10075)
  • mDNS has been disabled from all pre-compiled binaries to allow new features

Fixed

  • KNX ESP32 UDP mulicastpackage (#9811)
  • Command gpio using non-indexed functions regression from v9.1.0 (#9962)
  • ESP32 TasmotaClient firmware upgrade (#9218)
  • Reset to defaults after 6 hours of DeepSleep (#9993)
  • Backlog timing wraparound (#9995)
  • First LED in addressable string does not fade when using scheme (#10088)
  • Improved Opentherm error handling (#10055)
  • Platformio compiler option no target align removed fixing hardware watchdog exceptions
  • Shutter motordelay stop issue (#10033)
  • Shutter fix overflow on runtime over 100 seconds (#9800)
  • ESP32 CC2530 heap corruption (#10121)
  • ESP32 Analog input div10 rule trigger (#10149)

Removed

  • PN532 define USE_PN532_CAUSE_EVENTS replaced by generic rule trigger on pn532#uid=

[9.1.0.1] - 20201116

Added

  • Zigbee support for Mi Door and Contact (#9759)
  • Zigbee alarm persistence (#9785)
  • Support for EZO PMP sensors by Christopher Tremblay (#9760)
  • Commands TuyaRGB, TuyaEnum and TuyaEnumList (#9769)
  • Zigbee command ZbInfo and prepare support for EEPROM
  • Support for AS608 optical and R503 capacitive fingerprint sensor
  • Command SetOption115 1 to enable ESP32 MiBle
  • Zigbee command ZbLeave to unpair a device
  • Command SetOption116 1 to disable auto-query of zigbee light devices (avoids network storms with large groups)
  • Support for Shelly Dimmer 1 and 2 by James Turton (#9854)
  • IRremoteESP8266 library from v2.7.11 to v2.7.12

Changed

  • Core library from v2.7.4.5 to v2.7.4.7
  • Platformio compiler option no target align enabled (#9749)
  • Consolidate AddLog_P into AddLog_P2 and rename to AddLog_P
  • Sonoff L1 color up scaling and color margin detection (#9545)

Fixed

  • NTP fallback server functionality (#9739)
  • Telegram group chatid not supported (#9831)
  • KNX buttons, switches and sensors detection regression from v9.1.0 (#9811)
  • GUI MqttUser and MqttPassword updates when TLS is compiled in (#9825)

Removed

  • Version compatibility check

[9.1.0] 20201105

  • Release Imogen

[9.0.0.3] - 20201105

Added

  • TLS in binary tasmota-zbbridge (#9635)
  • Support for EZO O2 sensors by Christopher Tremblay (#9619)
  • Support for EZO PRS sensors by Christopher Tremblay (#9659)
  • Support for EZO FLO sensors by Christopher Tremblay (#9697)
  • Support for EZO DO sensors by Christopher Tremblay (#9707)
  • Support for EZO RGB sensors by Christopher Tremblay (#9723)
  • Zigbee reduce battery drain (#9642)
  • Zigbee command ZbMap to describe Zigbee topology (#9651)
  • Zigbee command ZbOccupancy to configure the time-out for PIR
  • Command Gpios 255 to show all possible GPIO configurations
  • Command SwitchText to change JSON switch names by barbudor (#9691)
  • Command SetOption114 1 to detach Switches from Relays and enable MQTT action state for all the SwitchModes returning {"Switch1":{"Action":"ON"}}
  • Command DimmerStep 1..50 to change default dimmer up and down step of 10% by James Turton (#9733)
  • HM10 Beacon support and refactoring by Christian Baars (#9702)
  • Support for Hass discovery of TuyaMcu and Sonoff Ifan by Federico Leoni (#9727)
  • Initial support for iBeacons (Sensor52) on ESP32 using internal BLE by rvbglas (#9732)

Changed

  • PlatformIO library structure redesigned for compilation speed by Jason2866
  • Zigbee flash storage refactor adding commands ZbProbe, ZbStatus2 and ZbRestore (#9641)
  • Default otaurl in my_user_config.h to http://ota.tasmota.com/tasmota/release/tasmota.bin.gz
  • When SetOption73 1 JSON result from {"ACTION":"SINGLE"} to {"Button1":{"Action":"SINGLE"}}

Fixed

  • Rule Break not working as expected when ONCE is enabled (#9245)
  • Rule expressions using mems corrupts character pool (#9301)
  • Button press rules regression introduced by #9589 (#9700)
  • Rule handling of JSON null regression from v8.5.0.1 (#9685)
  • Arilux RF remote detection regression from v8.3.0

Removed

  • Auto output selection of decimal or hexadecimal data based on user input. Now only based on SetOption17

[9.0.0.2] - 20201025

Added

  • Support for Vietnamese language translations by Tâm.NT
  • Support for timers in case of no-sunset permanent day by cybermaus (#9543)
  • Command NoDelay for immediate backlog command execution by Erik Montnemery (#9544)
  • Command SwitchMode 15 sending only MQTT message on switch change (#9593)
  • Command ShutterChange to increment change position (#9594)
  • Command SetOption113 1 to set dimmer low on rotary dial after power off
  • Support for EZO Ph and ORP sensors by Christopher Tremblay (#9567)
  • Support for EZO RTD sensors by Christopher Tremblay (#9585)
  • Support for EZO HUM sensors by Christopher Tremblay (#9599)
  • Support for EZO EC sensors by Christopher Tremblay (#9613)
  • Support for EZO CO2 sensors by Christopher Tremblay (#9619)
  • On ZigbeeBridge support for glowing led when permit join is active (#9581)
  • Support for PWM Dimmer multi-press and ledmask (#9584)
  • Make button press rules override PWM Dimmer functions (#9589)
  • Support for fixed output Hi or Lo GPIO selection
  • ESP32 support for Wireless-Tag WT32-ETH01 (#9496)
  • ESP32 MI32 Beacon support, RSSI at TELEPERIOD, refactoring by Christian Baars (#9609)

Changed

  • Command Gpio17 replaces command Adc
  • Command Gpios replaces command Adcs
  • Management of serial baudrate (#9554)
  • TLS fingerprint #define MQTT_FINGERPRINT from string to hexnumbers (#9570)
  • Rotary driver adjusted accordingly if Mi Desk Lamp module is selected (#9399)
  • Tasmota Arduino Core v2.7.4.5 allowing webpassword over 47 characters (#9687)
  • Webserver code optimizations (#9580, #9590)

Fixed

  • Convert AdcParam parameters from versions before v9.0.0.2
  • Telegram message decoding error regression from v8.5.0.1
  • Correct Energy period display shortly after midnight by gominoa (#9536)
  • Rule handling of Var or Mem using text regression from v8.5.0.1 (#9540)
  • TuyaMcu energy display regression from v8.5.0.1 (#9547)
  • Tuyamcu dimmers MQTT topic (#9606)
  • MQTT data corruption on MQTTLog 4 (#9571)
  • Scripter memory alignment (#9608)
  • Zigbee battery percentage (#9607)
  • HassAnyKey anomaly (#9601)
  • ESP32 Webcam broken regression from #9590

[9.0.0.1] - 20201010

Added

  • Optional support for Mitsubishi Electric HVAC by David Gwynne (#9237)
  • Optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353)
  • SDM630 three phase ImportActive Energy display when #define SDM630_IMPORT is enabled by Janusz Kostorz (#9124)
  • Optional support for inverted NeoPixelBus data line by enabling #define USE_WS2812_INVERTED (#8988)
  • PWM dimmer color/trigger on tap, SO88 led, DGR WITH_LOCAL flag by Paul Diem (#9474)
  • Support for stateful ACs using StateMode in tasmota-ir.bin by Arik Yavilevich (#9472)
  • Zigbee command ZbData for better support of device specific data
  • Support for analog buttons indexed within standard button range

Changed

  • Redesigning ESP8266 GPIO internal representation in line with ESP32 changing Template layout too
  • New IR Raw compact format (#9444)
  • MAX31865 driver to support up to 6 thermocouples selected by MX31865 CS instead of SSPI CS (#9103)
  • A4988 optional microstep pin selection
  • Pulsetime to allow use for all relays with 8 interleaved so Pulsetime1 is valid for Relay1, Relay9, Relay17 etc. (#9279)
  • Status command output for disabled status types
  • IRremoteESP8266 library from v2.7.10 to v2.7.11
  • NeoPixelBus library from v2.5.0.09 to v2.6.0

Fixed

  • Template conversion when GPIO17 is 0
  • Template using #define USER_TEMPLATE (#9506)
  • Ledlink blink when no network connected regression from v8.3.1.4 (#9292)
  • Exception 28 due to device group buffer overflow (#9459)
  • Shutter timing problem due to buffer overflow in calibration matrix (#9458)
  • Light wakeup exception 0 (divide by zero) when WakeupDuration is not initialised (#9466)
  • ADC initalization sequence (#9473)
  • Thermostat sensor status corruption regression from v8.5.0.1 (#9449)

Removed

  • Support for direct upgrade from Tasmota versions before v7.0
  • Auto config update for all Friendlynames and Switchtopic from Tasmota versions before v8.0

[8.5.1] - 20201002

  • Release Hannah

[8.5.0.1] - 20200907

Added

  • Command SetOption110 1 to disable Zigbee auto-config when pairing new devices
  • Command SetOption111 1 to enable frequency output for buzzer GPIO (#8994)
  • Command SetOption112 1 to enable friendly name in zigbee topic (use with SetOption89)
  • #define USE_MQTT_AWS_IOT_LIGHT for password based AWS IoT authentication
  • #define MQTT_LWT_OFFLINE and #define MQTT_LWT_ONLINE to user_config.h (#9395)
  • New shutter modes (#9244)
  • Zigbee auto-config when pairing
  • Support for MLX90640 IR array temperature sensor by Christian Baars
  • Support for VL53L1X time of flight sensor by Johann Obermeier

Changed

  • Replace ArduinoJson with JSMN for JSON parsing
  • WakeUp uses 256 steps instead of 100 (#9241)
  • Major redesign of TuyaMcu adding shutter, light and multiple dimmer support by Federico Leoni (#9330)

Fixed

  • Energy total counters (#9263, #9266)
  • Crash in ZbRestore
  • Reset BMP sensors when executing command SaveData and define USE_DEEPSLEEP enabled (#9300)
  • status 0 message when using define USE_MQTT_TLS due to small log buffer (#9305)
  • status 13 exception 9 when more than one shutter is configured
  • status 13 json message
  • Shelly 2.5 higher temperature regression from 8.2.0.1 (#7991)

[8.5.0] - 20200907

  • Release Hannah

[8.4.0.3] - 20200823

Added

  • Command PowerDelta1 to PowerDelta3 to trigger on up to three phases (#9134)
  • Zigbee web ui widget for Lights
  • SetOption109 1 to force gen1 Alexa mode, for Echo Dot 2nd gen devices only
  • Zigbee web ui for power metering plugs
  • Experimental support for ESP32 TTGO Watch and I2S Audio by Gerhard Mutz

Changed

[8.4.0.2] - 20200813

Added

  • Command SetOption103 0/1 to set TLS mode when TLS is selected
  • Command SetOption104 1 to disable all MQTT retained messages
  • Command SetOption106 1 to create a virtual White ColorTemp for RGBW lights
  • Command SetOption107 0/1 to select virtual White as (0) Warm or (1) Cold
  • Command SetOption108 0/1 to enable Teleinfo telemetry into Tasmota Energy MQTT (0) or Teleinfo only (1) - Add better config corruption recovery (#9046)
  • Virtual CT for 4 channels lights, emulating a 5th channel
  • Support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113)
  • Zigbee web gui widget for Temp/Humidity/Pressure sensors
  • Zigbee battery icon

Changed

  • White blend mode moved to using SetOption 105 instead of RGBWWTable

Fixed

  • Display power control (#9114)

Removed

  • Support for direct upgrade from versions before 6.6.0.11 to versions after 8.4.0.1

[8.4.0.1] - 20200730

Added

  • Zigbee better support for IKEA Motion Sensor
  • ESP32 Analog input support for GPIO32 to GPIO39
  • Zigbee options to ZbSend Config and ReadConfig
  • Command Restart 2 to halt system. Needs hardware reset or power cycle to restart (#9046)
  • Command SetOption102 0/1 to switch between Teleinfo French Metering mode, legacy 1200 bps (0) or Linky standard 9600 bps (1)

Changed

  • Triple-mode TLS via configuration in a single firmware (TLS AWS IoT, Letsencrypt and No-TLS)

Fixed

  • ESP32 PWM range

[8.4.0] - 20200730

  • Release George

[8.3.1.7] - 20200716

Added

  • Command DzSend<type> <index>,<value1(;value2)|state> to send values or state to Domoticz
  • Command SetOption100 0/1 to remove Zigbee ZbReceived value from {"ZbReceived":{xxx:yyy}} JSON message
  • Command SetOption101 0/1 to add the Zigbee source endpoint as suffix to attributes, ex Power3 instead of Power if sent from endpoint 3
  • Command (S)SerialSend6 <comma seperated values> (#8937)
  • Support for Sonoff Zigbee Bridge as module 75 (#8583)

Changed

  • Limited support of Arduino IDE as an increasing amount of features cannot be compiled with Arduino IDE
  • All timer references from Arm to Enable in GUI, Timer command and JSON message
  • Domoticz commands prefix from Domoticz to Dz
  • Ping now reports the hostname instead of IP address (#8948)
  • Zigbee randomizing of parameters at first run or after Reset

Removed

  • Remove Arduino ESP8266 Core support for versions before 2.7.1

[8.3.1.6] - 20200617

Added

  • Command Module2 to configure fallback module on fast reboot (#8464)
  • Command SetOption97 0/1 to switch between Tuya serial speeds 9600 bps (0) or 115200 bps (1)
  • Command SetOption98 0/1 to provide rotary rule triggers (1) instead of controlling light (0)
  • Command SetOption99 0/1 to enable zero cross detection on PWM dimmer
  • Support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers, need a adaptater. See dedicated full blog about French teleinformation stuff
  • Library to be used for decoding Teleinfo (French Metering Smart Meter)
  • Support for single wire LMT01 temperature Sensor by justifiably (#8713)
  • Compile time interlock parameters (#8759)
  • Compile time user template (#8766)
  • Rotary encoder support for light dimmer and optional color temperature if button1 still pressed (#8670)
  • Support for switches/relays using an AC detection circuitry e.g. MOES MS-104B or BlitzWolf SS5 (#8606)
  • Support for Schneider Electric iEM3000 series Modbus energy meter by Marius Bezuidenhout

Changed

  • ESP32 USER GPIO template representation decreasing template message size
  • Define USE_TASMOTA_SLAVE into USE_TASMOTA_CLIENT
  • Commands SlaveSend and SlaveReset into ClientSend and ClientReset
  • IRremoteESP8266 library updated to v2.7.8

Fixed

  • Exception or watchdog on rule re-entry (#8757)

[8.3.1.5] - 20200616

Added

  • ESP32 ethernet commands EthType 0/1, EthAddress 0..31 and EthClockMode 0..3
  • Zigbee initial support for EmberZNet protocol (raw send/receive only)

[8.3.1.4] - 20200615

Added

  • Basic support for ESP32 ethernet adding commands Wifi 0/1 and Ethernet 0/1 both default ON

[8.3.1.3] - 20200611

Added

  • Initial support for Telegram bot (#8619)
  • Support for HP303B Temperature and Pressure sensor by Robert Jaakke (#8638)
  • Rule trigger System#Init to allow early rule execution without Wi-Fi and mqtt initialized yet
  • Serial to TCP bridge, TCPStart and TCPBaudRate (needs #define USE_TCP_BRIDGE)

[8.3.1.2] - 20200522

Added

  • Command Time 4 to display timestamp using milliseconds (#8537)
  • Command SetOption94 0/1 to select MAX31855 or MAX6675 thermocouple support (#8616)
  • Commands LedPwmOn 0..255, LedPwmOff 0..255 and LedPwmMode1 0/1 to control led brightness by George (#8491)
  • Three Phase Export Active Energy to SDM630 driver
  • Wildcard pattern ? for JSON matching in rules
  • Support for unique MQTTClient (and inherited fallback topic) by full Mac address using mqttclient DVES_%12X (#8300)
  • Zigbee options to ZbSend to write and report attributes
  • CpuFrequency to status 2
  • FlashFrequency to status 4
  • Support for up to two BH1750 sensors controlled by commands BH1750Resolution and BH1750MTime (#8139)
  • Zigbee auto-responder for common attributes
  • Support for BL0940 energy monitor as used in Blitzwolf BW-SHP10 (#8175)

Changed

  • Energy JSON Total field from "Total":[33.736,11.717,16.978] to "Total":33.736,"TotalTariff":[11.717,16.978]
  • Energy JSON ExportActive field from "ExportActive":[33.736,11.717,16.978] to "ExportActive":33.736,"ExportTariff":[11.717,16.978]
  • Adafruit_SGP30 library from v1.0.3 to v1.2.0 (#8519)

Fixed

  • Escape of non-JSON received serial data (#8329)

[8.3.1.1] - 20200518

Added

  • Command Rule0 to change global rule parameters
  • More functionality to Switchmode 11 and 12 (#8450)
  • Dump of compressed rules over 512 chars and unishox decompress fix
  • Support for VEML6075 UVA/UVB/UVINDEX Sensor by device111 (#8432)
  • Support for VEML7700 Ambient light intensity Sensor by device111 (#8432)

Changed

  • IRremoteESP8266 library updated to v2.7.7

[8.3.1] - 20200518

  • Release Fred

[8.3.0.2] - 20200517

Added

  • Command DeviceName defaults to FriendlyName1 and replaces FriendlyName1 in GUI

Changed

  • Hass discovery from using template name to new Device name (#8462)

[8.3.0.1] - 20200514

Changed

  • KNX pow function to approximative pow saving 5k of code space
  • Mutichannel Gas sensor pow function to approximative pow saving 5k of code space
  • Quick Power Cycle detection from 4 to 7 power interrupts (#4066)

Fixed

  • Fix default state of SetOption73 0 for button decoupling and send multi-press and hold MQTT messages

[8.3.0] - 20200514

  • Release Fred

[8.2.0.6] - 20200501

Added

  • Experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
  • Support for analog anemometer by Matteo Albinola (#8283)
  • Support for OpenTherm by Yuriy Sannikov (#8373)
  • Support for Thermostat control by arijav (#8212)
  • Automatic compression of Rules to achieve ~60% compression by Stephan Hadinger
  • Command SetOption93 1 to control caching of compressed rules
  • Rule trigger at root level like on loadavg<50 do power 2 endon after state command
  • Zigbee support for router and end-device mode

Changed

  • Flash access removing support for any Core before 2.6.3
  • HAss discovery by Federico Leoni (#8370)
  • Default PWM Frequency to 977 Hz from 223 Hz
  • Minimum PWM Frequency from 100 Hz to 40 Hz
  • PWM updated to the latest version of Arduino PR #7231
  • Philips Hue emulation now exposes modelId and manufacturerId

[8.2.0.5] - 20200425

Changed

  • Breaking Change Device Groups multicast address and port (#8270)
  • IRremoteESP8266 library updated to v2.7.6

[8.2.0.4] - 20200417

Added

  • Config version tag
  • Command SetOption73 1 for button decoupling and send multi-press and hold MQTT messages by Federico Leoni (#8235)
  • Command SetOption92 1 to set PWM Mode from regular PWM to ColorTemp control (Xiaomi Philips ...)
  • Command SO as shortcut for command SetOption

Changed

  • PWM implementation to Arduino #7231 removing support for Core versions before 2.6.3
  • Default PWM Frequency to 223 Hz instead of 880 Hz for less interrupt pressure

Fixed

  • Fix Zigbee DimmerUp/DimmerDown malformed

[8.2.0.3] - 20200329

Added

  • Support for longer template names
  • Zigbee command ZbBindState and manufattribute
  • Zigbee command ZbConfig and configuration in Settings
  • Commands CounterDebounceLow and CounterDebounceHigh to control debouncing (#8021)
  • Commands NrfPage, NrfIgnore, NrfScan and NrfBeacon to NRF24 Bluetooth driver (#8075)
  • Command SetOption90 1 to disable non-json MQTT messages (#8044)
  • Command Sensor10 0/1/2 to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
  • Command Sensor10 31..254 to control BH1750 measurement time which defaults to 69 (#8016)
  • Command Sensor18 0..32000 to control PMS5003 sensor interval to extend lifetime by Gene Ruebsamen (#8128)
  • Command SetOption91 1 to enable fading at startup / power on
  • Command SetOption41 <x> to force sending gratuitous ARP every seconds
  • Command DevGroupName to specify up to four Device Group Names (#8087)
  • Command DevGroupSend to send an update to a Device Group (#8093)
  • Command Ping (#7176)
  • Command Palette to add the ability to specify a palette of colors (#8150)
  • Commands GlobalTemp and GlobalHum to init sensor data (#8152)
  • Quick Wi-Fi reconnect using saved AP parameters when SetOption56 0 (#3189)
  • More accuracy to GPS NTP server (#8088)
  • Support for an iAQ sensor (#8107)
  • Support for Seven Segment display using HT16K33 (#8116)
  • Support for AS3935 Lightning Sensor by device111 (#8130)
  • DimmerRange for PWM lights (#8120)

Changed

  • Light scheme 2,3,4 cycle time speed from 24,48,72,... seconds to 4,6,12,24,36,48,... seconds (#8034)
  • Remove floating point libs from IRAM
  • Remove MQTT Info messages on restart for DeepSleep Wake (#8044)
  • IRremoteESP8266 library updated to v2.7.5

Fixed

  • PWM flickering during Wi-Fi connection (#8046)
  • Zigbee crash with Occupancy sensor (#8089)
  • Prevent multiple pings to run concurrently
  • Scheme 2-4 brightness when SetOption68 1 (#8058)

[8.2.0.2] - 20200328

Added

  • Support for up to four MQTT GroupTopics using the same optional Device Group names (#8014)
  • Console command history (#7483, #8015)

[8.2.0.1] - 20200321

Added

  • Zigbee command ZbRestore to restore device configuration dumped with ZbStatus 2
  • Zigbee command ZbUnbind
  • Support for unreachable (unplugged) Zigbee devices in Philips Hue emulation and Alexa
  • Support for 64x48 SSD1306 OLED (#6740)

Changed

  • HM-10 sensor type detection and add features (#7962)

Fixed

  • Possible Relay toggle on (OTA) restart
  • Zigbee sending wrong Sat value with Hue emulation

[8.2.0] - 20200321

  • Release Elliot

[8.1.0.11] - 20200313

Added

  • HAss Discovery support for Button and Switch triggers by Federico Leoni (#7901)
  • Support for HDC1080 Temperature and Humidity sensor by Luis Teixeira (#7888)
  • Commands SwitchMode 13 PushOn and SwitchMode 14 PushOnInverted (#7912)
  • Command HumOffset -10.0 .. 10.0 to set global humidity sensor offset (#7934)
  • Zigbee support for Hue emulation by Stephan Hadinger
  • Dew Point to Temperature and Humidity sensors
  • Support for ElectriQ iQ-wifiMOODL RGBW light by Ian King (#7947)

Changed

  • Zigbee simplification of devices probing, saving Flash and memory

[8.1.0.10] - 20200227

Added

  • Support for Jarolift rollers by Keeloq algorithm
  • Zigbee features and improvements and remove support for Zigbee commands starting with Zigbee...
  • Support for MaxBotix HRXL-MaxSonar ultrasonic range finders by Jon Little (#7814)
  • Support for Romanian language translations by Augustin Marti
  • Support for La Crosse TX23 Anemometer by Norbert Richter (#3146, #7765)
  • Command SetOption89 0/1 for Zigbee distinct MQTT topics per device for SENSOR, allowing retained messages (#7835)

Changed

  • Default my_user_config.h driver and sensor support removing most sensors and adding most drivers
  • IRremoteESP8266 library updated to v2.7.4
  • Revert switchmode 6 according to issue 7778 (#7831)
  • Hue emulation code optimization

[8.1.0.9] - 20200220

Added

  • Initial support for Sensors AHT10 and AHT15 by Martin Wagner (#7596)
  • Support for Wemos Motor Shield V1 by Denis Sborets (#7764)
  • Zigbee enhanced commands decoding, added ZbPing
  • Commands SetOption85 0/1 and DevGroupShare supporting UDP Group command using GroupTopic without MQTT by Paul Diem (#7790)
  • Support for Martin Jerry/acenx/Tessan/NTONPOWER SD0x PWM dimmer switches by Paul Diem (#7791)
  • Command SetOption86 0/1 for PWM dimmer to turn brightness LED's off 5 seconds after last change
  • Command SetOption87 0/1 for PWM dimmer to turn red LED on when powered off
  • Command SetOption88 0/1 for PWM dimmer to let buttons control remote devices

Changed

  • Revert most wifi connectivity changes introduced in 8.1.0.5 (#7746, #7602, #7621)

Fixed

  • Zigbee auto-increment transaction number (#7757)

[8.1.0.8] - 20200212

Added

  • Another new DHT driver based on ESPEasy. The old driver can still be used using define USE_DHT_OLD. The previous new driver can be used with define USE_DHT_V2 (#7717)

Changed

  • MQTT message size with additional 200 characters
  • Some wifi code to attempt faster connection (#7621)
  • Display of some date and time messages from "Wed Feb 19 10:45:12 2020" to "2020-02-19T10:45:12"

Fixed

  • Relation between RSSI and signal strength

[8.1.0.7] - 20200210

Added

  • New DHT driver. The old driver can still be used using define USE_DHT_OLD (#7468)

Fixed

  • wrong encoding of Zigbee persistent data

[8.1.0.6] - 20200205

Added

  • Support for sensors DS18x20 and DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
  • Commands SwitchMode 11 PushHoldMulti and SwitchMode 12 PushHoldMultiInverted (#7603)
  • Command Buzzer -1 for infinite mode and command Buzzer -2 for following led mode (#7623)
  • Support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683)
  • BootCount Reset Time as BCResetTime to Status 1
  • ZbZNPReceivedand ZbZCLReceived being published to MQTT when SetOption66 1
  • Optional Wifi AccessPoint passphrase define WIFI_AP_PASSPHRASE in my_user_config.h (#7690)
  • Support for FiF LE-01MR energy meter by saper-2 (#7584)

Fixed

  • HAss sensor discovery part 1/4 by Federico Leoni (#7582, #7548)
  • MaxPower functionality (#7647)

[8.1.0.5] - 20200126

Added

  • SetOption84 0/1 sends AWS IoT device shadow updates (alternative to retained)
  • ZbBind (experimental) and bug fixes

Changed

  • Wifi connectivity stability (#7602)
  • IRremoteESP8266 library updated to v2.7.3

Fixed

  • PWM flickering at low levels (#7415)

[8.1.0.4] - 20200116

Added

  • Web page sliders when SetOption37 128 is active allowing control of white(s)
  • Zigbee persistence and friendly names
  • Most SetOptions as defines to my_user_config.h
  • SoftwareSerial to CSE7766 driver allowing different GPIOs (#7563)
  • Optional parameter <startcolor> to command Scheme <scheme>, <startcolor> to control initial start color
  • Rule trigger on one level deeper using syntax with two # like on zigbeereceived#vibration_sensor#aqaracubeside=0 do ...

Changed

  • Zigbee command prefix from Zigbee* to Zb*

Fixed

  • PowerDelta zero power detection (#7515)
  • OTA minimal gzipped detection regression from 8.1.0.3
  • RGBWWTable ignored (#7572)

[8.1.0.3] - 20200106

Added

  • Support for gzipped binaries
  • SwitchMode 8 ToggleMulti, SwitchMode 9 FollowMulti and SwitchMode 10 FollowMultiInverted (#7522)

Changed

  • Commands Prefix, Ssid, StateText, NTPServer, and FriendlyName displaying all items
  • IRremoteESP8266 library updated to v2.7.2

Fixed

  • WakeUp <x> ignores provided value (#7473)
  • Exception 9 restart on log message in Ticker interrupt service routines NTP, Wemos and Hue emulation (#7496)

[8.1.0.2] - 20191230

Added

  • Support for AdcParam parameters to control ADC0 Current Transformer Apparent Power formula by Jodi Dillon (#7100)
  • Optional support for Prometheus using file xsns_91_prometheus.ino (#7216)
  • Command ShutterButton <parameters> to control shutter(s) by to-scho (#7403)
  • Command SetOption82 0/1 to limit the CT range for Alexa to 200..380
  • Experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394)
  • Support to BMP driver to enter reset state (sleep enable) when deep sleep is used in Tasmota

Fixed

  • LCD line and column positioning (#7387)
  • Display handling of hexadecimal escape characters (#7387)
  • Improved fade linearity with gamma correction
  • Wrong gamma correction for Module 48 lights (PWM5 for CT)

[8.1.0.1] - 20191225

Added

  • Command SetOption79 0/1 to enable reset of counters at teleperiod time by Andre Thomas (#7355)
  • SerialConfig to Status 1
  • WifiPower to Status 5
  • Support for DS1624, DS1621 Temperature sensor by Leonid Myravjev
  • Zigbee attribute decoder for Xiaomi Aqara Cube

Changed

  • Lights: simplified gamma correction and 10 bits internal computation

Fixed

  • Sonoff Bridge, Sc, L1, iFan03 and CSE7766 serial interface to forced speed, config and disable logging
  • Serial initialization regression from previous fix
  • Commands Display and Counter from overruling command processing (#7322)
  • White added to light status (#7142)

[8.1.0] - 20191225

  • Release Doris

[8.0.0.3] - 20191224

Changed

  • Version bump due to internal Settings change

[8.0.0.2] - 20191223

Added

  • Zigbee better support for Xiaomi Double Switch and Xiaomi Vibration sensor
  • Support for AdcParam parameters to control ADC0 Moisture formula by Federico Leoni (#7309)
  • Commands WebButton1 until WebButton16 to support user defined GUI button text (#7166)

Changed

  • Settings variable namings
  • Number of FriendlyNames from 4 to 8

[8.0.0.1] - 20191221

Added

  • Support for max 150 characters in most command parameter strings (#3686, #4754)
  • Support for GPS as NTP server by Christian Baars and Adrian Scillato
  • Zigbee coalesce sensor attributes into a single message
  • Deepsleep start delay based on Teleperiod if Teleperiod differs from 10 or 300

Changed

  • Settings text handling allowing variable length text within a total text pool of 699 characters
  • Smoother Fade using 100Hz instead of 20Hz animation (#7179)
  • Number of rule Vars and Mems from 5 to 16 (#4933)

[7.2.0] - 20191221

  • Release Constance

Changed

  • Basic version string to lite (#7291)

Fixed

  • Arduino IDE compile error (#7277)
  • Restore ShutterAccuracy, MqttLog, WifiConfig, WifiPower and SerialConfig (#7281)
  • No AP on initial install (#7282)
  • Failing downgrade (#7285)

7.1.2.6 20191214

  • Change some more Settings locations freeing up space for future single char allowing variable length text
  • Change tasmota-basic.bin and FIRMWARE_BASIC to tasmota-lite.bin and FIRMWARE_LITE
  • Fix DeepSleep in case there is no wifi by Stefan Bode (#7213)
  • Fix Fade would ignore savedata 0 and store to flash anyways (#7262)
  • Add Zigbee send automatic ZigbeeRead after sending a command
  • Add Zigbee improving Occupancy:false detection for Aqara sensor
  • Add fallback support from version 8.x
  • Add restriction if fallback firmware is incompatible with settings resulting in unreachable device
  • Add support for DHT12 Temperature and Humidity sensor by Stefan Oskamp

7.1.2.5 20191213

  • Change some Settings locations freeing up space for future single char allowing variable length text
  • Add Zigbee support for Xiaomi Aqara Vibration Sensor and Presence Sensor by Stephan Hadinger
  • Add Shutter functions ramp up/down and MQTT reporting by Stefan Bode

7.1.2.4 20191209

  • Change HTTP CORS from command SetOption73 0/1 to Cors <cors_domain> allowing user control of specific CORS domain by Shantur Rathore (#7066)
  • Change GUI Shutter button text to Up and Down Arrows based on PR by Xavier Muller (#7166)
  • Change amount of supported DHT sensors from 3 to 4 by Xavier Muller (#7167)
  • Revert removal of exception details from MQTT info on restart
  • Add Wifi Signal Strength in dBm in addition to RSSI Wifi Experience by Andreas Schultz (#7145)
  • Add Yaw, Pitch and Roll support for MPU6050 by Philip Barclay (#7058)
  • Add reporting of raw weight to JSON from HX711 to overcome auto-tare functionality by @tobox (#7171)
  • Add command Sensor34 9 <weight code> to set minimum delta to trigger JSON message by @tobox (#7188)
  • Fix flashing H801 led at boot by Stephan Hadinger (#7165, #649)
  • Fix duplicated Backlog when using Event inside a Backlog by Adrian Scillato (#7178, #7147)
  • Fix Gui Timer when using a negative zero offset of -00:00 by Peter Ooms (#7174)

7.1.2.3 20191208

  • Change Exception reporting removing exception details from both MQTT info and Status 1. Now consolidated in Status 12 if available.

7.1.2.2 20191206

  • Remove rule trigger tele_power1#state due to compatibility
  • Add command SerialConfig 0..23 or SerialConfig 8N1 to select Serial Config based in PR by Luis Teixeira (#7108)
  • Add save call stack in RTC memory in case of crash, command Status 12 to dump the stack by Stephan Hadinger
  • Add Home Assistant force update by Frederico Leoni (#7140, #7074)

7.1.2.1 20191206

  • Add SML bus decoder syntax support for byte order by Gerhard Mutz (#7112)
  • Add rule var %topic% by Adrian Scillato (#5522)
  • Add rule triggers tele_power1#state and multiple tele-wifi1#xxx by Adrian Scillato (#7093)
  • Add experimental support for stepper motor shutter control by Stefan Bode
  • Add optional USE_MQTT_TLS to tasmota-minimal.bin by Bohdan Kmit (#7115)

7.1.2 20191206

  • Maintenance Release

7.1.1.1 20191201

  • Fix lost functionality of GPIO9 and GPIO10 on some devices (#7080)
  • Fix Zigbee uses Hardware Serial if GPIO 1/3 or GPIO 13/15 and SerialLog 0 (#7071)
  • Fix WS2812 power control (#7090)
  • Change light color schemes 2, 3 and 4 from color wheel to Hue driven with user Saturation control
  • Change log buffer size from 520 to 700 characters accomodating full rule text (#7110)

7.1.1 20191201

  • Maintenance Release

7.1.0.1 20191130

  • Fix slider for devices with one or two channels like only white or white/yellow
  • Fix TasmotaSlave buffer overrun on Tele
  • Fix light scheme 4 speed (#7072)
  • Add support for TasmotaSlave executing commands on Tasmota

7.1.0 20191129

  • Release Doris

7.0.0.6 20191122

  • Add colorpicker to WebUI by Christian Staars (#6984)
  • Change new Fade system much smoother, Speed now up to 40 (#6942, #3714)
  • Fix Arduino IDE function prototyping compile error (#6982)
  • Change update lib IRremoteESP8266 updated to v2.7.1, -2.7k flash and -1.5k RAM for Tasmota-IR
  • Fix auto--power on/off when setting channel to non-zero or zero value, when SetOption68 1
  • Fix postpone saving settings to flash until Fade is complete, avoids pause in Fade
  • Add command SetOption77 0/1 to keep power on when slider is far left

7.0.0.5 20191118

  • Fix boot loop regression
  • Add command TempOffset -12.6 .. 12.6 to set global temperature sensor offset (#6958)
  • Fix check deepsleep for valid values in Settings (#6961)
  • Fix Wifi instability when light is on, due to sleep=0 (#6961, #6608)
  • Add hardware detection to be overruled with SetOption51 (#6969)

7.0.0.4 20191108

  • Add command WifiPower 0 .. 20.5 to set Wifi Output Power which will be default set to 17dBm
  • Change supported PCF8574 I2C address range to 0x20 - 0x26 allowing other I2C devices with address 0x27 to be used at the same time
  • Change supported PCF8574A I2C address range to 0x39 - 0x3F allowing other I2C devices with address 0x38 to be used at the same time
  • Change supported MCP230xx I2C address range to 0x20 - 0x26 allowing other I2C devices with address 0x27 to be used at the same time
  • Add Keep last channels values when Color command end with '=' (#6799)
  • Add support for I2C sensor TLS2591 Light Intensity sensor (#6873)
  • Change Kept only NEC/RC5/RC6/HASH IR protocols in standard Tasmota, all other protocols require Tasmota-IR, saving 4K
  • Add command SetOption76 0/1 to enable incrementing bootcount when deepsleep is enabled (#6930)
  • Change Reset erase end address from as seen by SDK (getFlashChipSize) to full flash size (getFlashChipRealSize)
  • Change Zigbee log verbosity reduction

7.0.0.3 20191103

  • Add command I2cDriver for I2C driver runtime control using document I2CDEVICES.md
  • Fix random crash caused by UPNP flood
  • Add support for Honeywell HPMA115S0 particle concentration sensor by David Hunt (#6843)
  • Remove driver xsns_12_ads1115_i2cdev replaced by xsns_12_ads1115

7.0.0.2 20191102

  • Add command WebColor19 to control color of Module and Name (#6811)
  • Add support for Honeywell I2C HIH series Humidity and Temperetaure sensor (#6808)
  • Fix wrong Dimmer behavior introduced with #6799 when SetOption37 < 128
  • Change add DS18x20 support in Tasmota-IR
  • Add Zigbee command support, considered as v1.0 for full Zigbee support
  • Fix Reduce flash size after change to IRremoteESP8266 v2.7.0

7.0.0.1 20191027

  • Remove update support for versions before 6.0
  • Change default GUI to dark theme
  • Add command SetOption73 0/1 to re-enable HTTP Cross-Origin Resource Sharing (CORS) now default disabled (#6767)
  • Add frequency to ADE7953 energy monitor as used in Shelly 2.5 by ljakob (#6778)
  • Add command SetOption74 0/1 to enable DS18x20 internal pull-up and remove define DS18B20_INTERNAL_PULLUP (#6795)
  • Fix better control of RGB/White when SetOption37 >128, added Dimmer1 and Dimmer2 commands (#6714)
  • Add hide Alexa objects with friendlyname starting with '$' (#6722, #6762)
  • Add command SetOption75 0/1 to switch between grouptopic (0) using fulltopic replacing %topic% or (1) is cmnd/<grouptopic> (#6779)
  • Change IRremoteESP8266 library to v2.7.0

6.7.1.1 20191026

  • Change ArduinoSlave to TasmotaSlave
  • Add support for Tuya battery powered devices (#6735)
  • Change repository name from Sonoff-Tasmota to Tasmota and all code references from Sonoff to Tasmota

6.7.1 20191026

  • Release Allison
  • Fix on energy monitoring devices using PowerDelta Exception0 with epc1:0x4000dce5 = Divide by zero (#6750)
  • Fix Script array bug (#6751)

6.7.0 20191025

  • Release

6.6.0.21 20191022

  • Remove support for WPS and SmartConfig in favour of Web server (!) based WifiManager (#6680)
  • Remove binary sonoff-classic (#6680)
  • Remove command SetOption2

6.6.0.20 20191018

  • Add command SetOption65 0/1 to disable (1) fast power cycle detection fixing unwanted brownout trigger
  • Add absolute PowerDelta using command PowerDelta 101..32000 where 101 = 101-100 = 1W, 202 = 202-100 = 102W (#5901)
  • Add support for EX-Store WiFi Dimmer V4 (#5856)
  • Add ZigbeeRead command and many improvements (#6095)
  • Add ArduinoSlave driver (EXPERIMENTAL)

6.6.0.19 20191018

  • Replace obsolete xsns_23_sdm120 with xnrg_08_sdm120 and consolidate define USE_SDM120
  • Replace obsolete xsns_25_sdm630 with xnrg_10_sdm630 and consolidate define USE_SDM630
  • Replace obsolete xsns_49_solaxX1 with xnrg_12_solaxX1 (#6677)

6.6.0.18 20191010

  • Add command DimmerRange in Light module to support 2 byte dimming ranges from Tuya
  • Add Zigbee additional commands and sending messages to control devices (#6095)
  • Fix Rules were not triggered with IR unknown protocol or in sonoff-it (#6629)
  • Add define USE_DEEPSLEEP and command DeepSleepTime 0 or 10..86400 (seconds) to enter deepsleep mode (#6638)
  • Add define USE_SONOFF_RF to enable/disable Sonoff Rf support (#6648)
  • Add incremental beeps to Ifan03 remote control fan speed buttons (#6636)
  • Add rule support after every command execution like Fanspeed#Data=2 (#6636)
  • Fix handling of ligth channels when pwm_multichannel (Option68) is enabled
  • Add WebUI for multiple, independent PWM channels
  • Remove default DS18B20 driver and only support define DS18x20 (#6647)
  • Add support for PMS3003 dust particle sensor
  • Change Sonoff L1 support by adding define USE_SONOFF_L1

6.6.0.17 20191009

  • Add command SetOption34 0..255 to set backlog delay. Default value is 200 (mSeconds) (#6562)
  • Add command Gpio 255 to show physical GPIO configuration of all non-flash pins (#6407)

6.6.0.16 20191008

  • Change PZEM004T default address mask from 0.0.0.x to 192.168.1.x for legacy reason (#6585)
  • Fix PZEM004T, PZEMAC and PZEMDC autodetection (#6585)
  • Change light drivers internals to ease management

6.6.0.15 20191003

  • Change command PulseTime JSON message format and allow display of all pulsetimer information (#6519)
  • Add support for Chint DDSU666 Modbus energy meter by Pablo Zerón
  • Add support for SM2135 as used in Action LSC Smart Led E14 (#6495)
  • Add command SetOption72 0/1 to switch between software (0) or hardware (1) energy total counter (#6561)
  • Add Zigbee tracking of connected devices and auto-probing of Manuf/Model Ids
  • Fix better handling of PWM White Temperature mode for Module 48 (#6534)

6.6.0.14 20190925

  • Change command Tariffx to allow time entries like 23 (hours), 1320 (minutes) or 23:00. NOTE: As this is development branch previous tariffs are lost! (#6488)
  • Remove support for define USE_DS18x20_LEGACY and legacy DS18x20 driver (#6486)
  • Add initial support for MQTT logging using command MqttLog <loglevel> (#6498)
  • Add Zigbee more support - collect endpoints and clusters, added ZigbeeDump command
  • Add initial support for shutters by Stefan Bode (#288)
  • Add command to MCP230xx: sensor29 pin,0/1/2 for OFF/ON/TOGGLE
  • Add initial support for PCF8574 I2C I/O Expander (currently output only) by Stefan Bode
  • Add command SetOption71 0/1 to switch between different Modbus Active Energy registers on DDS238-2 energy meters (#6531)
  • Change command SetOption43 to make it more general. Now supports PS_16_DZ driver too (#6544)
  • Change command handling by moving buffers up in chain solving MQTTlog support (#6529)
  • Change detection of non-MQTT commands by allowing non-space characters as delimiter (#6540)
  • Fix TasmotaSerial: move serial send to IRAM for high speed baud rates

6.6.0.13 20190922

  • Add command EnergyReset4 x,x to initialize total usage for two tarrifs
  • Add command EnergyReset5 x,x to initialize total export (or production) for two tarrifs
  • Add command Sensor34 8,0 and Sensor34 8,1 to disable/enable JSON message on weight change over 4 gram
  • Add JSON array index support to rules evaluation allowing trigger on ENERGY#POWER[2]>0.60 from JSON ..,"Power":[0.00,0.68],.. (#6160)

6.6.0.12 20190910

  • Redesign command Tariff to now default to 0 (=disabled) and allowing to set both Standard Time (ST) and Daylight Savings Time (DST) start hour
  • Commands Tariff1 22,23 = Tariff1 (Off-Peak) ST,DST Tariff2 (Standard) 6,7 = Tariff2 ST,DST Tariff9 0/1 = Weekend toggle (1 = Off-Peak during weekend)
  • Change rename "Data" to "Hash" and limit to 32 bits when receiving UNKNOWN IR protocol (see DECODE_HASH from IRremoteESP8266)
  • Add command Gpios 255/All to show all available GPIO components (#6407)
  • Change JSON output format for commands Adc, Adcs, Modules, Gpio and Gpios from list to dictionary (#6407)
  • Add Zigbee support phase 3 - support for Xiaomi lumi.weather air quality sensor, Osram mini-switch
  • Change energy sensors for three phase/channel support
  • Add support for Shelly 2.5 dual energy (#6160)
  • Add initial support for up to three PZEM-014/-016 on serial modbus connection with addresses 1 (default), 2 and 3 (#2315)
  • Add initial support for up to three PZEM-004T on serial connection with addresses x.x.x.1 (default), 2 and 3 (#2315)
  • Add initial support for up to three PZEM-003/-017 on serial modbus connection with addresses 1 (default), 2 and 3 (#2315)
  • Add driver USE_SDM630_2 as future replacement for USE_SDM630 - Pls test and report
  • Add command ModuleAddress 1/2/3 to set Pzem module address when a single module is connected (#2315)

6.6.0.11 20190907

  • Change Settings crc calculation allowing short term backward compatibility
  • Add support for up to 4 INA226 Voltage and Current sensors by Steve Rogers (#6342)
  • Change Improve reliability of TasmotaSerial at 115200 bauds and reduce IRAM usage for Stage/pre-2.6
  • Add support for A4988 stepper-motor-driver-circuit by Tim Leuschner (#6370)
  • Add support for Hiking DDS238-2 Modbus energy meter by Matteo Campanella (#6384)

6.6.0.10 20190905

  • Redesign Tuya support by Shantur Rathore removing commands SetOption34, 41, 44, 45, 46 and 65 (#6353)
  • Add command Reset 99 to reset bootcount to zero (#684, #6351)
  • Change command Time 1/2/3 to select JSON time format ISO, ISO + Epoch or Epoch for legacy reason

6.6.0.9 20190828

  • Change theoretical baudrate range to 300..19660500 bps in 300 increments (#6294)
  • Add Full support of all protocols in IRremoteESP8266, to be used on dedicated-IR Tasmota version. Warning: +81k Flash when compiling with USE_IR_REMOTE_FULL
  • Add compile time define USE_WS2812_HARDWARE to select hardware type WS2812, WS2812X, WS2813, SK6812, LC8812 or APA106 (DMA mode only)
  • Add 'sonoff-ir' pre-packaged IR-dedicated firmware and 'sonoff-ircustom' to customize firmware with IR Full protocol support
  • Add Zigbee support phase 2 - cc2530 initialization and basic ZCL decoding
  • Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report
  • Add command Power0 0/1/2/Off/On/Toggle to control all power outputs at once (#6340)
  • Add time to more events (#6337)
  • Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch

6.6.0.8 20190827

  • Add Tuya Energy monitoring by Shantur Rathore
  • Add phase 1 Domoticz P1 Smart Meter support using energy sensors handled by xdrv_03_energy.ino based on an idea by pablozg
  • Add commands Tariff1 0..23 (start Off-Peak hour), Tariff2 0..23 (start Standard hour) and Tariff3 0/1 (Saturday and Sunday Off-Peak)

6.6.0.7 20190825

  • Expand Settings area to 4k for future use

6.6.0.6 20190819

  • Add I2C display driver for SH1106 oled by Gerhard Mutz
  • Add SPI display drivers for epaper 4.2 inch, ILI9488 TFT, SSD1351 Color oled and RA8876 TFT by Gerhard Mutz
  • Add support for HM17 bluetooth LE passive scan of ibeacon devices by Gerhard Mutz

6.6.0.5 20190816

  • Add command WebSensor 0/1 to control display of sensor data in web GUI (#6085)
  • Change some table locations from RAM to Flash
  • Fix wrong telemetry message when SetOption68 1 (#6191)
  • Add support for RDM6300 125kHz RFID Reader by Gerhard Mutz

6.6.0.4 20190806

  • Add support for CHIRP soil moisture sensor by Christian Baars
  • Add debug compile features using defines DEBUG_TASMOTA_CORE, DEBUG_TASMOTA_DRIVER and DEBUG_TASMOTA_SENSOR.
  • See DEBUG_CORE_LOG example in sonoff.ino and DEBUG_DRIVER_LOG example in xdrv_09_timers.ino
  • Add support for Solax X1 inverter by Pablo Zerón
  • Add ZigBee support phase 1 - low level MQTT ZNP messages for CC2530 devices
  • Add command Buzzer with optional parameters ,<duration of beep in 100mS steps>,<duration of silence in 100mS steps> enabled when a buzzer is configured (#5988)
  • Add support for PAJ7620 gesture sensor by Christian Baars

6.6.0.3 20190725

  • Change filename of configuration backup from using FriendlyName1 to Hostname solving diacritic issues (#2422)
  • Change Store AWS IoT Private Key and Certificate in SPI Flash avoiding device-specific compilations
  • Upgrade library IRRemoteEsp8266 to 2.6.4, now using sendPioneer()
  • Add support for MAX31865 Thermocouple sensor by Alberto Lopez Siemens
  • Add option 0 to Width1 (Marker), Width2 (Second), Width3 (Minute) and Width4 (Hour) disabling display (#6152)
  • Add MqttCount metric to STATE (#6155)
  • Add define USE_ENERGY_MARGIN_DETECTION to disable Energy Margin and Power Limit detection
  • Add define USE_ENERGY_POWER_LIMIT to disable Energy Power Limit detection while Energy Margin detection is active
  • Add allow repeat/longpress for IRSend raw, introduced IRSend option (#6074)
  • Add SetOption68 to enable multi-channel PWM instead of a single light (#6134)

6.6.0.2 20190714

  • Change commands Var and Mem to show all parameters when no index is given (#6107)
  • Add command SetOption67 0/1 to disable or enable a buzzer as used in iFan03
  • Add command DisplayWidth to set pixel width on supported devices
  • Add command DisplayHeight to set pixel height on supported devices
  • Add support for Sonoff iFan03 as module 71 (#5988)
  • Add support for a buzzer
  • Add support for IRSend long press ('repeat' feature from IRRemoteESP8266) (#6074)
  • Add support for IRHVAC Midea/Komeco protocol (#3227)
  • Add support for more IRSend protocols enabled in my_user_config.h
  • Add support for IRSend Pioneer protocol (#6100)
  • Add Oled reset GPIO option "OLED reset"

6.6.0.1 20190708

  • Fix Domoticz battery level set to 100 if define USE_ADC_VCC is not used (#6033)
  • Fix Force Elliptic Curve for Letsencrypt TLS #6042
  • Fix WeMo emulation for 1G echo and 2G echo dot (#6086)
  • Fix Xiaomi Philips brightness (#6091)
  • Change defines USE_TX20_WIND_SENSOR and USE_RC_SWITCH in my_user_config.h to disable to lower iram usage enabling latest core compilation (#6060, #6062)
  • Add blend RGB leds with White leds for better whites (#5895, #5704)
  • Add command SetOption41 0..8 to control number of Tuya switches (#6039)
  • Add command SetOption42 0..255 to set overtemperature (Celsius only) threshold resulting in power off all on energy monitoring devices. Default setting is 90 (#6036)
  • Add command SetOption66 0/1 to enable or disable Tuya dimmer range 255 slider control
  • Add command Time to disable NTP and set UTC time as Epoch value if above 1451602800 (=20160101). Time 0 re-enables NTP (#5279)
  • Add AZ7798 automatic setting of clock display (#6034)
  • Add Epoch and UptimeSec to JSON messages (#6068)
  • Add support for up to 4 INA219 sensors (#6046)

6.6.0 20190707

  • Remove support of TLS on core 2.3.0 and extent support on core 2.4.2 and up
  • Remove MQTT uptime message every hour
  • Refactor some defines to const
  • Refactor webserver HTML input, button, textarea, and select name based on id
  • Refactor webserver sensor data collection
  • Refactor TLS based on BearSSL, warning breaking change for fingerprints validation
  • Refactor management of lights, using classes and integers instead of floats
  • Refactor UDP initial message handling from string to char using static memory and add debug info (#5505)
  • Refactor IRSend and receive for 64-bit support (#5523)
  • Refactor MQTT which might solve issue (#5755)
  • Refactor IRSend by using heap when more than 199 values need to be send. May need increase of define MQTT_MAX_PACKET_SIZE too (#5950)
  • Refactor double to float in rules, and replaced trigonometric functions from stdlib with smaller versions (#6005)
  • Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds for AWS IoT support
  • Change gamma correction as default behavior, ie "Ledtable 1"
  • Change PWM resolution from 8 to 10 bits for low brightness lights
  • Change IRSend Panasonic protocol to 64-bit (#5523)
  • Change ADC0 to enabled by default in my_user_config.h (#5671)
  • Change define USE_EMULATION by USE_EMULATION_HUE and USE_EMULATION_WEMO (#5826)
  • Change default PowerDelta from 80% to 0% on new installations (#5858, #5028, #4813, #4130, #4145, #3795, #3778, #3660, #3648)
  • Fix display Bug in KNX webmenu for Physical Address
  • Fix the Unescape() function and the SendSerial3 behaviour
  • Fix webserver multiple Javascript window.onload functionality
  • Fix TasmotaSerial at 9600 bps solving DFPlayer comms (#5528)
  • Fix Configure Timer Web GUI (#5568)
  • Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592)
  • Fix use of SerialDelimiter value 128 (#5634)
  • Fix Sonoff Pow R2 / S31 invalid energy increments (#5789)
  • Fix core 2.5.x ISR not in IRAM exception (#5837)
  • Fix Philips Hue emulation Alexa issue by using part of MAC address for LightId (#5849)
  • Fix missing white channel for WS2812 (#5869)
  • Fix PZem startup issue (#5875)
  • Fix exception 9 when syslog is enabled and NTP is just synced (#5917)
  • Fix Toggle functionality to button double press when one button and two devices are detected (#5935)
  • Fix channel command for dual dimmers (#5940)
  • Fix not restoring white value on power off/power on (#5993)
  • Add command AdcParam to control ADC0 Temperature and Light formula parameters
  • Add command LedMask to assign which relay has access to power LED (#5602, #5612)
  • Add extended LED power control using command LedPowerX where X is 1 to 4. Enabled when "LedLink(i)" is configured too (#5709)
  • Add command Sensor20 1..255 to change Nova Fitness SDS01 working period in minutes (#5452)
  • Add command SetOption38 6..255 to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853)
  • Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756)
  • Add command SetOption40 0..250 to disable button functionality if activated for over 0.1 second. Needs SetOption1 1 and SetOption13 0 (#5449)
  • Add command SetOption63 0/1 to disable relay state feedback scan at restart (#5594, #5663)
  • Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator impacting DS18X20, DHT, BMP and SHT3X sensor names (#5689)
  • Add command SetOption65 0/1 and more Tuya Serial based device support (#5815)
  • Add command WebColor to change GUI colors on the fly
  • Add support for AWS IoT with TLS 1.2 on core 2.4.2 and up. Full doc here: https://github.com/arendst/Tasmota/wiki/AWS-IoT
  • Add support for Badger HR-E Water Meter (#5539)
  • Add support for Shelly 2.5 Energy and overtemp Monitoring (#5592)
  • Add support for color and colortone for Philips Hue emulation via Alexa (#5600 #4809)
  • Add support for Scripts as replacement for Rules. Default disabled but can be enabled in my_user_config.h (#5689)
  • Add support for up to four LEDs related to four power outputs. Enabled when "LedLink(i)" is configured too (#5709)
  • Add support for Shelly 1PM Template {"NAME":"Shelly 1PM","GPIO":[56,0,0,0,82,134,0,0,0,0,0,21,0],"FLAG":2,"BASE":18} (#5716)
  • Add support for SPS30 Particle sensor thanks to Gerhard Mutz (#5830)
  • Add support for VL53L0x time of flight sensor. Might interfere with TSL2561 using same I2C address (#5845)
  • Add support for Sonoff L1 thanks to reef-actor (#6002)
  • Add rule Http#Initialized
  • Add rule System#Save executed just before a planned restart
  • Add rule support for single JSON value pair like {"SSerialReceived":"on"} by expanding it to {"SSerialReceived":{"Data":"on"}} allowing for trigger SSerialReceived#Data=on (#5638)
  • Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
  • Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin
  • Add defines USE_EMULATION_WEMO and USE_EMULATION_HUE to my_user_config.h to control emulation features at compile time (#5826)
  • Add Toggle functionality to button double press when more devices are detected
  • Add device OverTemp (>73 Celsius) detection to Energy Monitoring devices with temperature sensor powering off all outputs
  • Add Tuya Dimmer 10 second heartbeat serial packet required by some Tuya dimmer secondary MCUs
  • Add all temperature, humidity and pressure for global access
  • Add validation check when loading settings from flash
  • Add HX711 weight restore after controlled restart or after power restore just before executing command Sensor34 7 (#5367, #5786)
  • Add GUI hexadecimal color options in my_user_config.h (#5586)
  • Add alternative IRSend command syntax IRSend raw,<freq>,<header mark>,<header space>,<bit mark>,<zero space>,<one space>,<bit stream> (#5610)
  • Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671)
  • Add AriLux RF control GPIO option "ALux IrSel" (159) replacing "Led4i" (59) for full LED control (#5709)
  • Add LED GPIO option "LedLink" (157) and "LedLinki" (158) to select dedicated link status LED (#5709)
  • Add all 5 PWM channels individually adressable with LEDs. (#5741)
  • Add reset of Energy values when connection to sensor is lost for over 4 seconds (#5874, #5881)
  • Add checkbox to GUI password field enabling visibility during password entry only (#5934)

6.5.0 20190319

  • Remove commands SetOption14 and SetOption63 as it has been superseded by command Interlock
  • Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
  • Remove support for MQTT_LIBRARY_TYPE, MQTT_ARDUINOMQTT and MQTT_TASMOTAMQTT (#5474)
  • Change webserver content handling from single String to small Chunks increasing RAM
  • Change code use of boolean to bool and byte to uint8_t
  • Change code uint8_t flags to bool flags
  • Change sonoff_template.h layout regarding optional module flags like ADC0
  • Change sonoff_template.h module lay-out by removing non-configurable GPIOs
  • Change button driver making it modular
  • Change switch driver making it modular and introduce input filter (#4665, #4724)
  • Change switch input detection by optimizing switch debounce (#4724)
  • Change web authentication (#4865)
  • Change image name BE_MINIMAL to FIRMWARE_MINIMAL and USE_xyz to FIRMWARE_xyz (#5106)
  • Change GUI weblog from XML to plain text solving possible empty screens (#5154)
  • Fix most compiler warnings
  • Fix Display exception 28 when JSON value is nullptr received
  • Fix epaper driver (#4785)
  • Fix HAss Sensor Discovery Software Watchdog restart (#4831, #4988)
  • Fix allowable MAX_RULE_VARS to 16 (#4933)
  • Fix mDNS addService (#4938, #4951)
  • Fix HAss discovery of MHZ19(B) sensors (#4992)
  • Fix some exceptions and watchdogs due to lack of stack space (#5215)
  • Fix GUI wifi password acception starting with asteriks (*) (#5231, #5242)
  • Fix command WebSend intermittent results (#5273, #5304)
  • Fix additional characters in fallbacktopic, hostname and mqttclient on core 2.5.0 (#5359, #5417)
  • Fix Energy TotalStartTime when commands EnergyReset0 and/or EnergyReset3 used (#5373)
  • Fix DS18S20 temperature calculation (#5375)
  • Fix float calculations in range from 0 to -1 (#5386)
  • Fix exception on GUI Configure Logging and Configure Other (#5424)
  • Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
  • Add command SerialDelimiter 128 to filter reception of only characters between ASCII 32 and 127 (#5131)
  • Add command SSerialSend5 <hexdata> to SerialBridge
  • Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#4910, #5014)
  • Add command Template 255 to copy module configuration over to current active template and store as user template named Merged (#5371)
  • Add command WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
  • Add command SetOption36 to control boot loop default restoration (#4645, #5063)
  • Add command SetOption37 for RGBCW color mapping (#5326)
  • Add command SetOption55 0/1 and define MDNS_ENABLE to disable/enable mDNS (#4793, #4923)
  • Add command SetOption62 0/1 to disable retain on Button or Switch hold messages (#5299)
  • Add support for Smanergy KA10 Smart Wall Socket with Energy monitoring
  • Add support for commands in sensor drivers
  • Add support for MAX31855 K-Type thermocouple sensor using softSPI (#4764)
  • Add support for Near Field Communication (NFC) controller PN532 using Serial (#4791, #5162)
  • Add support for OBI Power Socket 2 (#4829)
  • Add support for YTF IR Bridge (#4855)
  • Add support for Mi LED Desk Lamp with rotary switch (#4887)
  • Add support for Digoo DG-SP202 Smart Socket with Energy monitoring (#4891)
  • Add support for MAX44009 Ambient Light sensor (#4907)
  • Add support for inverted buttons and inverted buttons without pullup (#4914)
  • Add support for Luminea ZX2820 Smart Socket with Energy monitoring (#4921)
  • Add support for multiple ADS1115 I2C devices (#5083)
  • Add support for online template change using command Template or GUI Configure Other (#5177)
  • Add support for Korean language translations (#5344)
  • Add support for sensor SCD30 (#5434)
  • Add parameter CFG_HOLDER to status 1 message (#5206)
  • Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
  • Add Resolution property to Status 3 report providing previous SetOption second value property
  • Add property MqttCount to status 6 message representing number of Mqtt re-connections
  • Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
  • Add property Downtime to state and status 11 message representing the duration of wifi connection loss
  • Add variable %timestamp% to rules (#4749)
  • Add rule support for "==", "!=" ">=" and "<=" (#5122)
  • Add rule expression enabled by define USE_EXPRESSION in my_user_config.h (#5210)
  • Add Power status functionality to LED2 when configured leaving LED1 for Link status indication
  • Add user configuration of HLW8012 and HJL-01/BL0937 Energy Monitoring as used in Sonoff Pow and many Tuya based devices
  • Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
  • Add online template configuration using both commands and Configure Template menu option in GUI
  • Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560, #4947)
  • Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
  • Add button control when no relay configured (#4682)
  • Add startup delay of 4 seconds to button control (#4829)
  • Add core version conditional compile options to provided PWM files (#4917)
  • Add resiliency to saved Settings (#5065)
  • Add MHZ19 Temperature as Domoticz Temperature selection (#5128)
  • Add HAss status sensor (#5139)
  • Add status message to former declined group commands (#5145)
  • Add 0x to IRRemote (SetOption29) and RCSwitch (SetOption28) received hexadecimal data (#5431)

6.4.1 20181224

  • Change RAM usage BMP/BME I2C sensors
  • Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (#1528)
  • Change FallbackTopic detection (#4706)
  • Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (#4711)
  • Change MQTT GUI password handling (#4723)
  • Fix possible dtostrf buffer overflows by increasing buffers
  • Fix wifi strongest signal detection (#4704)
  • Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (#3159, #4712)
  • Add Slovak language file (#4663)
  • Add support for AZ-Instrument 7798 CO2 meter/datalogger (#4672)
  • Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (#4673)
  • Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (#4703)

6.4.0 20181217

  • Change GUI Configure Module by using AJAX for data fetch to cut page size (and memory use) by 40% In case of web page errors clear your browser cache or do Page Reload (F5 or Ctrl+R)
  • Change enforcing flashmode dout but it is still mandatory
  • Change bootcount update (being first) flash write to 10 seconds after restart
  • Change display and epaper drivers
  • Change command WebSend Host header field from IP address to hostname (#4331)
  • Change log buffer size from 512 to 520 to accommodate http sensor data (#4354)
  • Change default WIFI_CONFIG_TOOL from WIFI_WAIT to WIFI_RETRY in my_user_config.h (#4400)
  • Change webgui refresh time delay for Save Settings and local OTA Upload (#4423)
  • Change SR-04 driver to use NewPing library (#4488)
  • Change MCP230xx driver to support interrupt retention over teleperiod (#4547)
  • Change support for MPU6050 using DMP (#4581)
  • Fix unintended function overload of WifiState
  • Fix wifi connection errors using wifi disconnect and ESP.reset instead of ESP.restart
  • Fix Sonoff Pow R2 and Sonoff S31 Serial interface hang caused by Sonoff Basic R2 driver delay implementation (and possibly core bug)
  • Fix MQTT connection error after restart
  • Fix wifi re-scan connection baseline
  • Fix possible strncat buffer overflows
  • Fix intermittent Pzem sensor energy overflow calculation error
  • Fix shelly2 ghost switching caused by lack of pull-up inputs (#4255)
  • Fix hardware serial pin configuration. To keep using hardware serial swap current Rx/Tx pin configuration only (#4280)
  • Fix MqttRetry values above 255 seconds (#4424)
  • Fix WifiManager functionality on initial installation (#4433)
  • Fix ArduinoOTA for Core 2.5.0 (#4620)
  • Add minutes to commands Timezone to allow all possible world timezones
  • Add more strict checks for GPIO selections
  • Add code image and optional commit number to version
  • Add dynamic delay to main loop providing time for wifi background tasks
  • Add additional start-up delay during initial wifi connection
  • Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver
  • Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 weather stations using 868MHz RF sensor receiver
  • Add user definition of defines WIFI_RSSI_THRESHOLD (default 10) and WIFI_RESCAN_MINUTES (default 44)
  • Add command SetOption58 0/1 to enable IR raw data info in JSON message (#2116)
  • Add command IRSend |0,,,.. to allow raw data transmission (#2116)
  • Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173)
  • Add command SetOption57 0/1 to enable wifi network re-scan every 44 minutes with a rssi threshold of 10 to select highest RSSI (#3173)
  • Add support for SDM220 (#3610)
  • Add default sleep 1 to sonoff-basic to lower energy consumption (#4217)
  • Add wifi status to Tuya (#4221)
  • Add delays to reduce CPU usage at boot time (#4233)
  • Add command SetOption24 0/1 to select pressure unit as hPa or mmHg (#4241)
  • Add optional hardware serial when GPIO13(Rx) and GPIO15(Tx) are selected removing hardware serial from GPIO01(Tx) and GPIO03(Rx) (#4288)
  • Add support for Gosund SP1 v2.3 Power Socket with Energy Monitoring (#4297)
  • Add support for Armtronix dimmers. See wiki for info (#4321)
  • Add to command WebSend option to send a direct path when command starts with a slash (#4329)
  • Add support for LG HVac and IrRemote (#4377)
  • Add initial support for Hass sensor discovery (#4380)
  • Add support for Fujitsu HVac and IrRemote (#4387)
  • Add support for I2C MGC3130 Electric Field Effect sensor by Christian Baars (#3774, #4404)
  • Add command CalcRes to set number of decimals (0 - 7) used in commands ADD, SUB, MULT and SCALE (#4420)
  • Add CPU average load to state message (#4431)
  • Add command SetOption59 0/1 to change state topic from tele/STATE to stat/RESULT (#4450)
  • Add support for SM Smart Wifi Dimmer PS-16-DZ (#4465)
  • Add support for Teckin US Power Socket with Energy Monitoring (#4481)
  • Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497)
  • Add support for iFan02 Fanspeed in Domoticz using a selector (#4517)
  • Add support for GPIO02 for newer Sonoff Basic (#4518)
  • Add Announce Switches to MQTT Discovery (#4531)
  • Add support for Manzoku Power Strip (#4590)

6.3.0 20181030

  • Change web Configure Module GPIO drop down list order for better readability
  • Change status JSON message providing more switch and retain information
  • Change xsns_17_senseair.ino to use TasmotaModbus library
  • Change MCP230xx driver
  • Change PubSubClient Mqtt library to non-blocking EspEasy version
  • Change energy monitoring using energy sensor driver modules
  • Change Webserver page handler for easier extension (thx to Adrian Scillato)
  • Change pinmode for no-pullup defined switches to pullup when configured as switchmode PUSHBUTTON (=3 and up) (#3896)
  • Change default OTA Url to http://thehackbox.org/tasmota/release/sonoff.bin (#4170)
  • Remove support for MQTT Client esp-mqtt-arduino by #define MQTT_LIBRARY_TYPE MQTT_ESPMQTTARDUINO
  • Remove commands PowerCal, VoltageCal and CurrentCal as more functionality is provided by commands PowerSet, VoltageSet and CurrentSet
  • Remove restart after ntpserver change and force NTP re-sync (#3890)
  • Fix showing Period Power in energy threshold messages
  • Fix header file execution order by renaming user_config.h to my_user_config.h
  • Fix some TSL2561 driver issues (#3681)
  • Fix KNX PA exception. Regression from 6.2.1 buffer overflow caused by subStr() (#3700, #3710)
  • Fix setting and getting color temperature for Philips Hue emulation (#3733)
  • Fix ButtonRetain to not use default topic for clearing retain messages (#3737)
  • Fix syslog when emulation is selected (#2109, #3784)
  • Fix rule trigger POWER1#STATE execution after restart and SetOption0 is 0 (#3856)
  • Fix Home Assistant forced light discovery (#3908)
  • Fix invalid configuration restores and decode_config.py crc error when savedata = 0 (#3918)
  • Fix timer offset -00:00 causing 12:00 hour offset (#3923)
  • Fix I2CScan invalid JSON error message (#3925)
  • Fix exception when wrong Domoticz JSON message is received (#3963)
  • Fix Sonoff Bridge RfRaw receive (#4080, #4085)
  • Fix possible wifi connection error (#4044, #4083)
  • Fix invalid JSON floating point result from nan (Not a Number) and inf (Infinity) into null (#4147)
  • Fix rule mqtt#connected trigger when mqtt is disabled (#4149)
  • Add support for LCD, Matrix, TFT and Oled displays
  • Add support for Neo Coolcam Wifi Smart Power Plug
  • Add support for Michael Haustein ESP Switch
  • Add support for MQTT Client based on lwmqtt to be selected by #define MQTT_LIBRARY_TYPE MQTT_ARDUINOMQTT
  • Add support for Neo Coolcam Wifi Smart Power Plug
  • Add support for Michael Haustein ESP Switch
  • Add support for MQTT Client based on lwmqtt to be selected by #define MQTT_LIBRARY_TYPE MQTT_ARDUINOMQTT
  • Add support for DS3231 Real Time Clock
  • Add support for HX711 Load Cell with optional web GUI scale interface to demonstrate easy GUI plug-in
  • Add support for serial 8N2 communication to TasmotaModbus and TasmotaSerial libraries
  • Add support for RF transceiving using library RcSwitch (#2702)
  • Add support for Shelly 1 and Shelly 2 (#2789)
  • Add support for La Crosse TX20 Anemometer (#2654, #3146)
  • Add support for MP3 player using DFRobot RB-DFR-562 (#3723)
  • Add Support for Xiaomi-Philips Bulbs (#3787)
  • Add support for PCA9685 12bit 16pin hardware PWM driver (#3866)
  • Add support for EXS Relay V5.0 (#3810)
  • Add support for OBI Power Socket (#1988, #3944)
  • Add support for Teckin Power Socket with Energy Monitoring (#3950)
  • Add support for Pzem-003/017 DC Energy monitoring module (#3694)
  • Add support for Pzem-014/016 AC Energy monitoring module (#3694)
  • Add support for CSL Aplic WDP 303075 Power Socket with Energy Monitoring (#3991, #3996)
  • Add support for Tuya Dimmer (#469, #4075)
  • Add command Display to show all settings at once
  • Add command SerialSend5 to send raw serial data like "A5074100545293"
  • Add command WebRefresh 1000..10000 to control web page refresh in milliseconds. Default is 2345
  • Add command WeightRes 0..3 to control display of decimals for kilogram
  • Add command RGBWWTable to support color calibration (#3933)
  • Add command Reset 4 (reset to defaults but keep wifi params) and Reset 5 (as reset 4 and also erase flash) (#4061)
  • Add command SetOption35 0..255 (seconds) to delay mDNS initialization to control possible Wifi connect problems
  • Add command SetOption52 0/1 to control display of optional time offset from UTC in JSON messages (#3629, #3711)
  • Add command SetOption53 0/1 to toggle gui display of Hostname and IP address (#1006, #2091)
  • Add authentication to HTTP web pages
  • Add decimals as input to commands PowerSet, VoltageSet and CurrentSet
  • Add tools/decode-config.py by Norbert Richter to decode configuration data. See file for information
  • Add define USE_DISPLAYS for selecting image sonoff-display
  • Add define USE_BASIC for selecting image sonoff-basic without most sensors
  • Add auto reload of main web page to some web restarts
  • Add TasmotaModbus library as very basic modbus wrapper for TasmotaSerial
  • Add more API callbacks and document API.md
  • Add Apparent Power and Reactive Power to Energy Monitoring devices (#251)
  • Add token %hostname% to command FullTopic (#3018)
  • Add Wifi channel number to state message (#3664)
  • Add user configurable GPIO02 and GPIO03 on H801 devices (#3692)
  • Add toggle function RGBW lights (#3695, #3697)
  • Add network information to display start screen (#3704)
  • Add sleep to Nova Fitness SDS01X sensor (#2841, #3724, #3749)
  • Add Analog input AD0 enabled to sonoff-sensors.bin (#3756, #3757)
  • Add power value below 5W to Sonoff Pow R2 and S31 (#3745)
  • Add RF Receiver control to module MagicHome to be used on Arilux LC10 (#3792)
  • Add userid/password option to decode-status.py (#3796)
  • Add delay after restart before processing rule sensor data (#3811)
  • Add force_update to Home Assistant discovery (#3873)
  • Add rule triggers SWITCH1#BOOT and POWER1#BOOT (#3904, #3910)
  • Add Hebrew language file (#3960)
  • Add TotalStartTime to Energy JSON message (#3971)
  • Add whitespace removal from RfRaw and SerialSend5 (#4020)
  • Add support for two BMP/BME sensors (#4195)

6.2.1 20180905

  • Fix possible ambiguity on command parameters if StateText contains numbers only (#3656)
  • Fix Wemo emulation to select the first relay when more than one relay is present (#3657)
  • Fix possible exception due to buffer overflow (#3659)
  • Fix lost energy today and total energy value after power cycle (#3689)

6.2.0 20180901

  • Allow user override of define MAX_RULE_VARS and MAX_RULE_TIMERS (#3561)
  • Disable wifi sleep for both Esp8266/Arduino core 2.4.1 and 2.4.2 to solve device freeze caused by Espressif SDK bug (#3554)
  • Change DS18B20 driver to provide better instant results
  • Change some sensor drivers to provide instant results
  • Change define USE_ALL_SENSORS to USE_SENSORS as it doesn't contain all sensors due to duplicate I2C addresses
  • Change some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250
  • Change default Wifi config option from WPS to Wifi Manager if WPS is disabled or Wifi Smartconfig if webserver is disabled or Wifi Serial input if Smartconfig is disabled
  • Change SHT1x driver to provide better instant results and fix I2C interference
  • Change DHT driver to provide better instant results and add decimals to DHT11 (#3164)
  • Change DS18x20 driver to provide better instant results (#3169)
  • Change CounterType 1 from milliseconds to microseconds (#3437)
  • Change scheduler for better sleep support using Uptime, Delay, PulseTime and TelePeriod, Blinktime (#3581)
  • Remove unused functionality from Sonoff-minimal to save space
  • Remove WPS and SmartConfig from sonoff-minimal saving 56k code space
  • Remove TSL2561 debug message and update library (#2415)
  • Remove forced restart when sleep command is executed (#3554)
  • Fix invalid response using more than 4 switches and domoticz
  • Fix sonoff-minimal not using default settings
  • Fix unsecure main webpage update
  • Fix DHT driver mixing values for different sensors (#1797)
  • Fix EnergyReset3 regression not clearing total energy (#2723)
  • Fix rules once regression from v6.1.0 (#3198, #3226)
  • Fix command Scale buffer overflow (#3236)
  • Fix possible WDT due to long MQTT publish handling (#3313)
  • Fix command TimeDst/TimeStd invalid JSON (#3322)
  • Fix handling of default names when using names starting with shortcut character ",0,1 or 2 (#3392, #3600, #3618)
  • Fix LM75AD I2C sensor detection (#3408)
  • Fix iFan02 power on state (#3412, #3530)
  • Fix some Pow R2 and S31 checksum errors using optimized re-sync (#3425)
  • Fix SDM120 reporting wrong negative values to Domoticz (#3521)
  • Fix MQTT reconnection detection when using TasmotaMqtt library (#3558)
  • Fix OtaMagic when file path contains a dash (-) (#3563)
  • Fix Sonoff Bridge data reception when using Portisch EFM8 firmware using in data buffer length (#3605)
  • Add read sensor retry to DS18B20, DS18x20, DHT, SHT1X and HTU21
  • Add user selection of Wifi Smartconfig as define USE_SMARTCONFIG in user_config.h
  • Add boot loop detection and perform some solutions
  • Add wifi and mqtt status led blinkyblinky to be disabled by SetOption31 1. Does not work when LedPower is On (deliberate) (#871, #2230, #3114, #3155)
  • Add support for TM1638 switch (#2226)
  • Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525)
  • Add support for APDS9960 proximity sensor (#3051)
  • Add support for MPR121 controller in input mode for touch buttons (#3142)
  • Add support for MCP230xx for general purpose input expansion and command Sensor29 (#3188)
  • Add default Wifi Configuration tool as define WIFI_CONFIG_NO_SSID in user_config.h if no SSID is configured (#3224)
  • Add command Timers 0/1 to globally disable or enable armed timers (#3270)
  • Add support for CCS811 sensor (#3309)
  • Add Turkish language file (#3332)
  • Add command SerialSend4 to send binary serial data (#3345)
  • Add initial support for sensor MPU6050 (#3352)
  • Add rule triggers Wifi#Connected and Wifi#Disconnected (#3359)
  • Add option + to command Rule to concatenate new rule with existing rules (#3365)
  • Add message when JavaScript is not enabled in webbrowser (#3388)
  • Add build time setting of ButtonTopic and SwitchTopic (#3414)
  • Add iFan02 Fanspeed + and Fanspeed - command options (#3415)
  • Add Individual HSBColorX commands (#3430, #3615)
  • Add output support on MCP23008/MCP23017 (#3436)
  • Add modulo option to rules like rule1 on Time#Minute|5 do backlog power on;delay 200;power off endon (#3466)
  • Add RGB support for Domoticz (#3547)
  • Add all ruletimer values to command RuleTimer result message (#3571)
  • Add command Publish2 for publishing retained MQTT messages (#3593)
  • Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have user control over debounce timing. Default is 50mS (#3594)
  • Add RuleX debug options 8,9,10 (StopOnError) to control RuleX execution status after an exception restart (#3607)
  • Add rule variables %sunrise%, %sunset%, %uptime% and %time% (#3608)
  • Add optional MQTT_TELE_RETAIN to Energy Margins message (#3612, 3614)

6.1.1 20180714

  • Revert wifi changes (#3177)
  • Revert sonoff-minimal removals causing failure of wifi connection (#3177)

6.1.0 20180706

  • Remove version 3, 4 and pre 5.2 settings auto-upgrade. See https://github.com/arendst/Tasmota/wiki/Upgrading#migration-path
  • Change default CFG_HOLDER from 0x20161209 to 4617 (=0x1209) - no impact on default upgrades
  • Change number of supported switches from 4 to 8 (#2885, #3086)
  • Change BME680 driver from Adafruit to Bosch BME680 library (#2969)
  • Fix Pzem004T checksum error
  • Fix KNX bug when doing reply of sensors values
  • Fix rules induced LWT message
  • Fix possible wifi connection problem (#1366)
  • Fix some Pow R2 and S31 checksum errors (#1907)
  • Fix display selection of un-available GPIO options in Module Configuration webpage (#2718)
  • Fix timer re-trigger within one minute after restart (#2744)
  • Fix IRSend not accepting data value of 0 by David Conran (#2751)
  • Fix vars on rules by Adrian Scillato (#2769)
  • Fix bug in KNX menu by Adrian Scillato (#2770)
  • Fix anomalies in rules (#2778)
  • Fix HUE bridge V1 software version by Heiko Krupp (#2788)
  • Fix Hardware Watchdog restart when using event command (#2853)
  • Add Ukrainian language file
  • Add KNX support for DS18S20 Temperature sensor
  • Add CRC to Settings making future upgrades more fail-safe
  • Add feature information to Status 4
  • Add tools folder with python script decode-status.py for decoding some status fields like SetOption and Features
  • Add Slots on the KNX Web Menu to select Group Addess to receive data to trigger rules
  • Add two rule sets of 511 characters using commands rule1, rule2 and rule3
  • Add Console Commands to send KNX Commands and KNX Values
  • Add Slots on the KNX Web Menu to select Group Addess to send data from console commands
  • Add Events to trigger rules when a command or read requests is received from KNX
  • Add command SetOption30 to enforce Hass discovery as light group (#1784)
  • Add support for BlitzWolf BW-SHP2 (and Homecube, Gosund SP1) Energy Monitoring Smart Socket (#2223)
  • Add time in minutes to rule Time#Initialized, Time#set and Time#Minute (#2669)
  • Add Eastron SDM630 energy meter by Gennaro Tortone (#2735)
  • Add KNX communication enhancement by Adrian Scillato (#2742)
  • Add KNX energy data by Adrian Scillato (#2750)
  • Add rule support for IrReceive and RfReceive (#2758)
  • Add python script fw-server.py in tools folder to create a simple OTA server by Gennaro Tortone (#2759)
  • Add rule variables %time% for minutes since midnight, %uptime%, %sunrise% and %sunset% giving time in minutes (#2669)
  • Add rules %mem1% to %mem5% variable names storing data in flash (#2780)
  • Add rules test on %varx% or %memx% (#2780)
  • Add optional token %id% substituting the unique MAC address to fulltopic by Michael Graf (#2794)
  • Add support for Sonoff S26 Smart Socket (#2808)
  • Add command WebSend [(:,:)] (#2821)
  • Add increment and decrement value to command Counter (#2838)
  • Add support for Sonoff iFan02 as module 44 introducing command FanSpeed 0..3 (#2839)
  • Add source information to command execution to be shown with logging option 3 (#2843)
  • Add support for uploading Sonoff Bridge firmware found in tools/fw_efm8bb1 folder build by Portisch using Web Gui File Upload (#2886)
  • Add command RfRaw to control Portisch firmware features
  • Add support for I2C temperature sensor LM75AD (#2909)
  • Add option 0 to command Timers disarming all timers (#2962)
  • Add performance improvement when updating multiple individual WS2812 pixels (#3007)
  • Add command SetOption28 to switch between hex or decimal Sonoff Bridge RF received data format (#3008)
  • Add command SetOption29 to switch between hex or decimal IR received data format
  • Add decimal values support for commands ADD, SUB, MULT and SCALE (#3083, #3089)
  • Add support for bitflags SetOption50 .. SetOption81 (#3118)

5.14.0 20180515

  • Update language files
  • Update TasmotaSerial to 2.0.0 allowing Hardware Serial Fallback when correct connections are configured
  • Change command handling
  • Change user_config(_override).h defines TIME_STD and TIME_DST
  • Change user_config(_override).h otaurl to http://sonoff.maddox.co.uk/tasmota/sonoff.bin (#2588, #2602)
  • Fix configuration restore regression from 5.13.1
  • Fix compile error when ADC is enabled and Rules are disabled (#2608)
  • Fix rule power trigger when no backlog command is used (#2613)
  • Fix several timer data input and output errors (#2597, #2620)
  • Fix KNX config error (#2628)
  • Fix sensor MHZ-19 vanishing data over time (#2659)
  • Fix KNX reconnection issue (#2679)
  • Fix DST and STD time for Southern Hemisphere by Adrian Scillato (#2684, #2714)
  • Add Portuguese in Brazil language file
  • Add SetOption26 to enforce use of indexes even when only one relay is present (#1055)
  • Add support for sensor SI1145 UV Index / IR / Visible light (#2496)
  • Add rule state test for On/Off in addition to 0/1 (#2613)
  • Add hardware serial option to MHZ-19 sensor (#2659)
  • Add Eastron SDM120 energy meter by Gennaro Tortone (#2694)
  • Add user entry DST/STD using commands TimeStd and TimeDst (See wiki for parameter syntax) (#2721)

5.13.1 20180501

  • Fix JSON buffers size too small for execution in some situations (#2580)
  • Fix configuration restore (#2591)
  • Add define MODULE for user selecting default model although it preferably should not be changed (#569, #2589)

5.13.0 20180430

  • Change platformio option sonoff-ds18x20 to sonoff-allsensors enabling ds18x20 and all other sensors in one image
  • Change status display of Ssid and SetOption
  • Change default option SetOption15 from 0 to 1 providing better initial PWM experience
  • Change webpage parameter communication
  • Change max number of commands in Backlog from 15 to 30 and ignore commands overflowing
  • Change TSL2561 driver to joba library and delete Adafruit library (#1644)
  • Change default parameters in user_config.h to undefined for easy installation (#1851)
  • Change max user configurable hold time from 10 to 25 seconds (#1851)
  • Change Sonoff SC JSON format (#1939)
  • Change Polish language to using Diacritics (#2005)
  • Change user_config_override usage by providing user_config_override_sample.h (#2228)
  • Change MQTT response topic for Energy changes from ENERGY to SENSOR (#2229, #2251)
  • Change default Reset configuration time from 4 seconds to 40 seconds on Button hold (#2268)
  • Change ESP8266 Analog JSON message from {"Analog0:123"} to {"ANALOG":{"A0:123"}} to accomodate rules (#2560)
  • Change Counter JSON message from {"Counter1":0,"Counter3":0} to {"COUNTER":{"C1":0,"C3":0}} to accomodate rules
  • Change ADS1115 JSON message from {"ADS1115":{"Analog0":123,"Analog1":123}} to {"ADS1115":{"A0":123,"A1":123}}
  • Fix intermittent exception when dns lookup is used while sleep is enabled
  • Fix 5.4.0 regression turning off single press after button hold during 4x hold time
  • Fix possible wifi connection problem by erasing sdk configuration parameters
  • Fix NTP sync to Thu Jan 01 08:00:10 1970 results in uptime 17651+ days (core2.4.1/sdk2.2.1)
  • Fix MAX31850 higher temperatures (#1269)
  • Fix freeing more code space when emulation is disabled (#1592)
  • Fix providing web page configuratin option for Friendly Name when no device (relay or light) is configured (#1850)
  • Fix compile error when define HOME_ASSISTANT_DISCOVERY_ENABLE is not set (#1937)
  • Fix MQTT TLS fingerprint validation (#2033)
  • Fix update temperature on DS18x20 drivers (#2328)
  • Fix compile error when not defined USE_TIMERS (#2400)
  • Fix configuration filename truncation when it contains spaces (#2484, #2490)
  • Fix Energy Today and Yesterday overflow (#2543)
  • Add serial debug info
  • Add Portuguese language file
  • Add Czech language file
  • Add Bulgarian language file
  • Add Domoticz dust (custom) sensors to PMS5003 and NovaFitness SDS drivers as PM1, PM2.5 and PM10
  • Add commands Publish, Rule, RuleTimer and Event. See Wiki about Rule restriction, usage and examples
  • Add sonoff-classic, sonoff-allsensors and sonoff-knx
  • Add some coloring to important web buttons
  • Add support for sensor HC-SR04 ultrasonic (#113, #1964, #2444)
  • Add define MQTT_TELE_RETAIN compile option default set to 0 (#1071)
  • Add 16 timers using commands Timer and Timers (#1091)
  • Add optional Timer configuration webpage to be enabled in user_config.h with define USE_TIMERS_WEB
  • Add Multichannel Gas sensor using MultiChannel_Gas_Sensor library (#1245)
  • Add Domoticz Battery and RSSI Quality (#1604)
  • Add command HSBColor Hue,Sat,Bri (#1642, #2203)
  • Add compile time support for WS2812 BRG and RBG led configurations to be defined in user_config.h (#1690)
  • Add optional usage of %d or %X suffices in MQTT client to append chipid (#1871)
  • Add optional usage of %d or %X suffices in MQTT topic to append chipid (#1871)
  • Add optional usage of %d or %04d in ota url to be replaced with chipid (#1871)
  • Add Sonoff Bridge command RfKey 5 to show current RF key values either default or learned (#1884)
  • Add user configurable serial GPIOs to MagicHome and Arilux modules (#1887)
  • Add Russian language file (#1909)
  • Add Webserver upload preflight request support (#1927)
  • Add Home Assistant clear other device (#1931)
  • Add Restart time to Status 1 (#1938)
  • Add optional TSL2561 driver using library Joba_Tsl2561 to be enabled in user_config.h with define USE_TSL2561_JOBA (#1951)
  • Add support for sensor SHTC3 (#1967)
  • Add compiler check for stable lwIP version v1.4 (#1940)
  • Add support for multiple SHT3X sensors (#1949, #2110)
  • Add always suffix with device number in Mqtt discovery topic (#1962)
  • Add support for optional MQTT drivers to be selected in user_config.h (#1992)
  • Add optional Arduino OTA support to be enabled in user_config.h (#1998)
  • Add diacritics to Polish language file (#2005)
  • Add Hungarian language file (#2024)
  • Add support for Nova Fitness SDS011 and possibly SDS021 particle concentration sensor (#2070)
  • Add single decimal precision to Nova Fitness SDS0x1 sensor values (#2093)
  • Add Chinese (Traditional) in Taiwan language file (#2108)
  • Add Sonoff SC domoticz support for Sound level as Counter and Air quality (#2118)
  • Add a second TLS fingerprint to allow switching keys in TLS mode (#2033, #2102)
  • Add display of remaining pulse time to command PulseTime (#2085)
  • Add additional time offset to Wifi Retry based on device mac address (#2089)
  • Add command Color6 RRGGBB for Clock hour marker color and command Rotation pixels for Clock rotation (#2092)
  • Add HTML language header in local language (#2123)
  • Add command PowerDelta 0..100 (percentage) to Energy monitoring devices to report on active power load change (#2157)
  • Add Restart Reason to Status 1 report (#2161)
  • Add command Channel 0..100 to control dimmer value for individual color channels (#2111, #2203)
  • Add support for Hardware Serial bridge using commands SerialDelimiter, Baudrate and SerialSend. Supports 8N1 and text only (#2182)
  • Add support for Software Serial bridge using commands SerialDelimiter, SBaudrate and SSerialSend. Supports 8N1 and text only (#2190)
  • Add support for Zengge WF017 PWM Led strip controller (#2202)
  • Add PWM status to command State if PWM enabled (#2203)
  • Add all FriendlyNames to Status information (#2208)
  • Add Channel status information (#2211)
  • Add hexadecimal Data entry to command IrSend using 0x notation (#1290, #2314)
  • Add Home Assistant MQTT Discovery for Buttons and change SetOption19 response (#2277)
  • Add multiple color entry support for command Led like Led2 120000 001200 000012 setting led2 as Red, Led3 as Green and Led4 as Blue (#2303)
  • Add hexadecimal RGB color entry on RGBCW leds (#2304)
  • Add support for SGP30 gas and air quality sensor (#2307)
  • Add optional Sunrise and Sunset timers with commands Latitide and Longitude to be enabled with define USE_SUNRISE in user_config.h (#2317)
  • Add timer sunrise and sunset offset (#2378)
  • Add user selectable defines for Sunrise/set Dawn option (#2378)
  • Add optional KNX IP Protocol Support (#2402)
  • Add random window to timers (#2447)
  • Add Greek language file (#2491)
  • Add support for Sonoff Pow R2 (#2340)
  • Add GPIO_User to GPIO02 for all Sonoff T1 (#2524)

5.12.0 20180209

  • Change library PubSubClient.h define MQTT_MAX_PACKET_SIZE from 512 to 1000 for Home Assistant support
  • Change relation of define MESSZ being dependent on PubSubClient.h define MQTT_MAX_PACKET_SIZE
  • Change command color parameter input checks to less strict for Home Assistant support
  • Change command Ina219Mode into command Sensor13
  • Change commands HlwPCal, HlwUCal and HlwICal to PowerCal, VoltageCal and CurrentCal to be used for both Pow and S31 calibration
  • Change commands HlwPSet, HlwUSet and HlwISet to PowerSet, VoltageSet and CurrentSet to be used for both Pow and S31 calibration
  • Change uptime from hour to second resulting in a display of 123T13:45:21 where 123 is days
  • Change module name Wemos D1 mini into Generic (#1220)
  • Change HTML from width=100% to style=width:100% supporting HTML5 (#1358)
  • Change OSWATCH_RESET_TIME (Blocked loop) from 30 to 120 seconds to allow slow networks (#1556)
  • Change WIFI_MANAGER_SEC into WIFI_CONFIG_SEC (#1616)
  • Change function pointers code to save code space and memory (#1683)
  • Change webserver argument processing gaining 5k code space (#1705)
  • Change weblog memory usage (#1730, #1793, #1819)
  • Update TasmotaSerial library to 1.1.0
  • Update language files Italian (#1594), Dutch (#1723) and Spanish (#1722)
  • Fix Non-English JSON temperature unit attachement
  • Fix Arilux RF induced exception by moving interrupt handler to iram on non ESP8266/Arduino lib v2.3.0
  • Fix truncated command names and wrong response for DomoticzSwitchIdx (#1571)
  • Fix %-sign issue as printf escape character in Humidity and Sonoff SC (#1579)
  • Fix DS18B20 temperature JSON decimal dot (#1561)
  • Fix Energy JSON message (#1621)
  • Fix IRSend parameter translation (#1636)
  • Fix TSL2561 device detection (#1644, #1825)
  • Fix BME680 teleperiod resistance measuring (#1647)
  • Fix Energy Monitoring Energy Today and Energy Total reading after restart (#1648)
  • Fix IRReceive Data value (#1663)
  • Fix Energy Monitoring Energy Period roll-over (#1688)
  • Fix compiler warnings (#1774)
  • Fix command PWM response if no PWM channel is configured (#1783)
  • Add locale Decimal Separator to Web sensor page
  • Add ColorTemperature to light status message
  • Add command PowerOnState option 5 which inverts PulseTime and allows for delayed always on after power on
  • Add OtaMagic two step Web server OTA upgrade using filename-minimal image if OTA free space is too small
  • Add support for PMS5003 and PMS7003 particle concentration sensor
  • Add command SetOption21 1 to allow Energy Monitoring when power is off on Sonoff Pow and Sonoff S31 (#1420)
  • Add Chinese language file (#1551)
  • Add French language file (#1561)
  • Add Spanish language file (#1589)
  • Add HTTP Allow Cross Origin removed from ESP8266/Arduino lib v2.4.0 (#1572)
  • Add Home Assistant MQTT Discovery for switch and light to be enabled by command SetOption19 1 (#1534) or define HOME_ASSISTANT_DISCOVERY_ENABLE in user_config.h (#1685)
  • Add command State to retrieve device state information (same data as teleperiod state and status 11 in slightly different JSON format)
  • Add optional login to Webserver AP mode (#1587, #1635)
  • Add command Sensor15 2 to start MHZ19(B) Zero Point Calibration (#1643)
  • Add support for Sonoff S31 Smart Socket with Power Consumption Detection (#1626)
  • Add command SetOption20 to allow update of Dimmer/Color/Ct without turning power on (#1719, #1741)
  • Add NTP sync time slot based on chip id (#1773)
  • Add cursor pointer to web button (#1836)

5.11.1 20180107

  • Fix Sonoff Pow command handling (#1542)

5.11.0 20180107

  • Minor webpage HTML optimizations (#1358)
  • Updated German translation (#1438)
  • Change Sonoff Pow Energy MQTT data message and consolidate Status 8 into Status 10
  • Change ADS1115 default voltage range from +/-2V to +/-6V (#1289)
  • Change text to Active for 3 minutes (#1364)
  • Change Wemo SetBinaryState to distinguish from GetBinaryState (#1357)
  • Change output of HTTP command to valid JSON and Array only (#1363)
  • Removed all MQTT, JSON and Command language defines from locale files and set fixed to English (#1473)
  • Renamed commands Color2,3,4 to Color3,4,5
  • Fix BME280 calculation (#1051)
  • Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End of Transmission) flag (#1095, #1294)
  • Fix PWM initialization in Dimmer/Color mode (#1321)
  • Fix Wemo Emulation (#1357)
  • Fix display of build date and time in non-english locale (#1465)
  • Fix Wemo and Hue emulation by adding M-Search response delay (#1486)
  • Add libraries Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and TSL2561-Arduino-Library
  • Add command Color2 to set color while keeping same dimmer value
  • Add device function pointers
  • Add support for SenseAir S8 CO2 sensor
  • Add color led signal to Carbon Dioxide (CO2) sensors using defines CO2_LOW and CO2_HIGH in user_config.h
  • Add support for Domoticz Air Quality sensor to be used by MH-Z19(B) and SenseAir sensors
  • Add support for PZEM004T energy sensor
  • Add support for iTead SI7021 temperature and humidity sensor by consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (#735)
  • Add support for BME680 using adafruit libraries (#1212)
  • Add support for MH-Z19(B) CO2 sensor (#561, #1248)
  • Add multipress support and more user configurable GPIO to Sonoff Dual R2 (#1291)
  • Add support for TSL2561 using adafruit library (#661, #1311)
  • Add support for SHT3x (#1314)
  • Add support for Arilux LC06 (#1414)
  • Add Italian language file (#1449)
  • Add 2nd Gen Alexa support to Wemo emulation discovery (#1357, #1450)
  • Add define for additional number of WS2812 schemes (#1463)

5.10.0 20171201

  • Upgrade library ArduinoJson to 5.11.2
  • Upgrade library IRRemoteEsp8266 to 2.2.1 + 2 commits but disabled some protocols (code size reduction)
  • Upgrade library NeoPixelBus to 2.2.9
  • Upgrade library OneWire to 2.3.3 + 6 commits and disabled CRC lookup-table (#define ONEWIRE_CRC8_TABLE 0) (code size reduction)
  • Update library PubSubClient to 2.6 + 9 commits and additional delay (#790)
  • Update core_esp8266_wiring_digital.c to latest (staged) level
  • Patch library I2Cdevlib-Core for esp8266-core 2.4.0-rc2 compatibility
  • Remove command EnergyReset 1..3 now replaced by EnergyReset1 to EnergyReset3
  • Remove spaces in JSON messages (code size reduction)
  • Renamed xsns_05_ds18x20.ino to xsns_05_ds18x20_legacy.ino still using library OneWire and providing dynamic sensor scan
  • Fix possible iram1_0_seg compile error by shrinking ICACHE_RAM_ATTR code usage
  • Fix PWM watchdog timeout if Dimmer is set to 100 or Color set to 0xFF (#1146)
  • Fix Sonoff Bridge Learn Mode hang caused by unrecognised RF code (#1181)
  • Fix blank console log window by using XML character encoding (#1187)
  • Fix wrong response name for command HlwISet (#1214)
  • Fix DHT type sensor timeout recognition by distinguish "signal already there" from "timeout" (#1233)
  • Add fixed color options 1..12 to command Color
  • Add + (plus) and - (minus) to commands Dimmer (+10/-10), Speed and Scheme
  • Add + (plus) and - (minus) to command Color to select 1 out of 12 preset colors
  • Add + (plus) and - (minus) to command Ct to control ColdWarm led ColorTemperature (+34/-34)
  • Add commands EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3 0..42500000
  • to (Re)set Energy Today, Yesterday or Total respectively in Wh (#406, #685, #1202)
  • Add optional ADS1115 driver as alternative for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2
  • Add support for INA219 Voltage and Current sensor to be enabled in user_config.h with define USE_INA219
  • Add support for Arilux LC11 (Clearing RF home code when selecting no Arilux module)
  • Add support for WS2812 RGBW ledstrips to be enabled in user_config.h with define USE_WS2812_CTYPE (#1156)
  • Add SettingsSaveAll routine to command SaveData to be used before controlled power down (#1202)
  • Add option PUSHBUTTON_TOGGLE (SwitchMode 7) to allow toggling on any switch change (#1221)
  • Add new xdrv_05_ds18x20.ino free from library OneWire and add the following features:
  • Add support for DS1822
  • Add forced setting of 12-bit resolution for selected device types (#1222)
  • Add read temperature retry counter (#1215)
  • Fix lost sensors by performing sensor probe at restart only thereby removing dynamic sensor probe (#1215)
  • Fix sensor address sorting using ascending sort on sensor type followed by sensor address
  • Rewrite JSON resulting in shorter message allowing more sensors in default firmware image:
  • "DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}
  • Add additional define in user_config.h to select either single sensor (defines disabled), new multi sensor (USE_DS18X20) or legacy multi sensor (USE_DS18X20_LEGACY)
  • Add clock support for more different pixel counts (#1226)
  • Add support for Sonoff Dual R2 (#1249)
  • Add FriendlyName to web page tab and add program information to web page footer (#1275)

5.9.1 20171107

  • Add external sensor function pointer interface to enable easy sensor addition
  • Add support for ADS1115 to be enabled in user_config.h and needs libraries i2cdevlib-Core and i2cdevlib-ADS1115 (#338, #660)
  • Fix Backup Configuration file download failure by defining proper file size (#1115)
  • Fix Exception 26 and empty console screen after usage of command WakeupDuration (#1133)
  • Fix some changed iTead web links in README.md (#1137)

5.9.0 20171030

  • Rewrite code (partly) using Google C++ Style Guide (https://google.github.io/styleguide/cppguide.html)
  • Rewrite code by using command lookup tables and javascript (client side) web page expansions
  • Change HTML/CSS to enable nicer form field entry
  • Change default PWM assignments for H801 RGB(CW) led controller to support optional Color/Dimmer control
  • GPIO04 (W2) from GPIO_PWM2 to GPIO_USER to be user configurable for GPIO_PWM5 (second White - Warm if W1 is Cold)
  • GPIO12 (Blue) GPIO_PWM3 no change
  • GPIO13 (Green) from GPIO_PWM4 to GPIO_PWM2
  • GPIO14 (W1) from GPIO_PWM1 to GPIO_USER to be user configurable for GPIO_PWM4 (first White - Cold or Warm)
  • GPIO15 (Red) from GPIO_PWM5 to GPIO_PWM1
  • Change default PWM assignments for MagicHome RGB(W) led controller to support optional Color/Dimmer control
  • GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
  • GPIO12 (Blue) from GPIO_PWM5 to GPIO_PWM3
  • GPIO13 (White) GPIO_USER to be user configurable for GPIO_PWM4 (White - Cold or Warm)
  • GPIO14 (Red) from GPIO_PWM3 to GPIO_PWM1
  • Change default PWM assignment for Witty Cloud to support optional Color/Dimmer control (#976)
  • GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
  • GPIO13 (Blue) from GPIO_PWM5 to GPIO_PWM3
  • GPIO15 (Red) from GPIO_PWM3 to GPIO_PWM1
  • Change when another module is selected now all GPIO user configuration is removed
  • Change command name IRRemote to IRSend (#956)
  • Remove Arduino IDE version too low warning as it interferes with platformio.ini platform = espressif8266_stage
  • Fix command FullTopic entry when using serial or console interface
  • Fix possible UDP syslog blocking
  • Fix minimum TelePeriod of 10 seconds set by web page
  • Fix command GPIOx JSON response (#897)
  • Fix inverted relay power on state (#909)
  • Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930)
  • Fix alignment of web page items in some browsers (#935)
  • Fix setting all saved power settings to Off when SetOption0 (SaveState) = 0 (#955)
  • Fix timezone range from -12/12 to -13/13 (#968)
  • Fix Southern Hemisphere TIME_STD/TIME_DST (#968)
  • Fix TLS MQTT SSL fingerprint test (#970, #808)
  • Fix virtual relay status message used with Color/Dimmer control (#989)
  • Fix command IRSend and IRHvac case sensitive parameter regression introduced with version 5.8.0 (#993)
  • Fix pressure calculation for some BMP versions regression introduced with version 5.8.0i (#974)
  • Fix Domoticz Dimmer set to same level not powering on (#945)
  • Fix Blocked Loop when erasing large flash using command reset 2 (#1002)
  • Fix relay power control when light power control is also configured as regression from 5.8.0 (#1016)
  • Fix Mqtt server mDNS lookup only when MqttHost name is empty (#1026)
  • Add debug information to MQTT subscribe
  • Add translations to I2Cscan
  • Add translation to BH1750 unit lx
  • Add light scheme options (Color cycle Up, Down, Random) and moving WS2812 schemes up by 3
  • Add Domoticz counter sensor to IrReceive representing Received IR Protocol and Data
  • Add option 0 to MqttHost to allow empty Mqtt host name
  • Add support for Arilux AL-LC01 RGB Led controller (#370)
  • Add esp8266 de-blocking to PubSubClient library (#790)
  • Add Domoticz sensors for Voltage and Current (#903)
  • Add platformio OTA upload support (#928, #934)
  • Add warning to webpage when USE_MINIMAL is selected (#929)
  • Add smoother movement of hour hand in WS2812 led clock (#936)
  • Add support for Magic Home RGBW and some Arilux Led controllers (#940)
  • Add command SetOption15 0 (default) for command PWM control or SetOption15 1 for commands Color/Dimmer control to PWM RGB(CW) leds (#941)
  • Add Domoticz counter sensor to Sonoff Bridge representing Received RF code (#943)
  • Add support for Luani HVIO board (https://luani.de/projekte/esp8266-hvio/) (#953)
  • Add PWM initialization after restart (#955)
  • Add IR Receiver support. Disable in user_config.h (#956)
  • Add support for inverted PWM (#960)
  • Add Sea level pressure calculation and Provide command Altitude (#974)
  • Add support for up to 8 relays (#995)
  • Add commands RfSync, RfLow, RfHigh, RfHost and RfCode to allow sending custom RF codes (#1001)
  • Add retain to ENERGY messages controlled by command SensorRetain (#1013)
  • Add commands Color2, Color3, Color4, Width2, Width3, Width4 and SetOption16 to set Ws2812 Clock parameters (#1019)
  • Add German language file (#1022)
  • Add support for connecting to MQTT brokers without userid and/or password (#1023)
  • Add support for esp8266 core v2.4.0-rc2 (#1024)
  • Add commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
  • Add Polish language file (#1044, #1047)
  • Add support for KMC 70011 Power Monitoring Smart Plug (#1045)
  • Add support for VEML6070 I2C Ultra Violet level sensor (#1053)
  • Add light turn Off Fade (#925)
  • Add IrSend command option Panasonic as IrSend {"Protocol":"Panasonic", "Bits":16388, "Data":<Panasonic data>}
  • where 16388 is 0x4004 hexadecimal (#1014)
  • Add retry counter to DHT11/21/22 sensors (#1082)

5.8.0 20170918

  • Remove the need for NeoPixelBus library for Hue support
  • Consolidate WS2812 into Sonoff Led for flexible future led strip library changes
  • Invert WS2812 fade speed to align with Sonoff led (Speed 1 = fast, Speed 8 = slow)
  • Remove upper case MQTT receive buffer
  • Reduce code and string length for output of commands Modules and GPIOs
  • Add Sonoff SC debug information
  • Change syslog service
  • Removed webserver syslog disable as now no longer needed
  • Increased default MQTT message size from 368 to 405 bytes while keeping MQTT_MAX_PACKET_SIZE = 512 (because we can)
  • Fix MQTT Offline or Remove MQTT retained topic code
  • Fix Domoticz loop when Emulation is selected
  • Add blink to WS2812 and Sonoff Led (#643)
  • Add option WIFI_WAIT (5) to command WifiConfig to allow connection retry to same AP without restart or update flash (#772, #869)
  • Add support for Witty Cloud (#794)
  • Add GPIO14 to Sonoff Dual (#797, #839)
  • Add support for Yunshan Wifi Relay (#802)
  • Add GPIO16 input pulldown (#827)
  • Add timeout to DHT and DS18B20 sensors (#852)
  • Fix watchdog timeout caused by lack of stack space by moving to heap (#853)
  • Allow LogPort and MqttPort up to 65535 and add LogPort tot Status 3 (#859)
  • Allow command SwitchTopic in group mode (#861)
  • Allow command SwitchMode if no switches are defined (#861)
  • Add optional dimmer parameter to command Wakeup for WS2812, AiLight, Sonoff B1, Led and BN-SZ01 (#867)
  • Fix basic On, Off, Toggle, Blink and BlinkOff commands when other language is selected (#874)

5.7.1 20170909

  • Remove leading spaces from MQTT data
  • Fix webconsole special character entry
  • Allow # as prefix for color value
  • Fix Alexa detection and Hue App Update Request (#698, #854)

5.7.0 20170907

  • Shrink module configuration webpage
  • Fix settings order during startup to allow for displaying debug messages
  • Fix some string length issues
  • Add more string length tests by using strncpy
  • Add Ai-Thinker RGBW led (AiLight)
  • Add Power check and add PulseTime to power check at startup (#526)
  • Add Supla Espablo support (#755)
  • Add more precision to Sonoff Pow period and power results using command WattRes 0|1 (#759)
  • Add basic internationalization and localization (#763)
  • Add more Sonoff Pow range checking (#772)
  • Fix invalid JSON (#786, #822)
  • Add duplicate check to received RF signal within 2 seconds for Sonoff Bridge (#810)

5.6.1 20170818

  • Change module list order in webpage
  • Fix Sonoff T1 1CH and 2CH configuration (#751)

5.6.0 20170818

  • Fix Sonoff Pow intermittent exception 0
  • Change Sonoff Pow sending Domoticz telemetry data only
  • Add Ai-Thinker RGBW led (AiLight) (experimental)
  • Add NeoPixelBus library to Sonoff Led for Hue support
  • Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
  • Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
  • Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color Temperature
  • Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
  • Add CT parameter to Hue
  • Add Sonoff T1 support (#582)
  • Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
  • Add command SetOption14 0|1 to enable interlock mode (#719, #721)
  • Fix Mitsubishi HVAC IR power controll (#740)

5.5.2 20170808

  • Extent max number of WS2812 pixels from 256 to 512 (#667)
  • Add OTA handling if server responds with no update available (#695)
  • Removed undocumented command FlashMode (#696)
  • Fix compile time error message due to increased message buffer size (#703)

5.5.1 20170805

  • Fix Sonoff Rf Bridge issues
  • Add Sonoff RF Bridge MQTT messages on received and learned RF signal
  • Add command VoltRes 0|1 to select voltage resolution to 0.1 V (#654)
  • Add averaging to Analog input (#686)
  • Add Energy tele data on Sonoff Pow Threshold change (#688)
  • Fix inconsistent property names in Messages (#690)

5.5.0 20170730

  • Reduce code space by removing the following commands as they are replaced by SetOption alternatives:
  • SaveState = SetOption0
  • ButtonRestrict = SetOption1
  • Units = SetOption2
  • MQTT = SetOption3
  • MQTTResponse = SetOption4
  • TempUnit = SetOption8
  • Smoothing WS2812 animation poll, invert fade speed and max allowed wakeup time down to 3000 seconds
  • Fix initial button press detection
  • Add support for Sonoff RF Bridge 433 using command RfKey
  • Fix regression from 5.0.7 by increasing message buffer size from 360 to 368 to accomodate 4 x DS18x20 sensors (#637)
  • Add GroupTopic to Topic test when using ButtonTopic/SwitchTopic to send either ON/OFF or TOGGLE (#642)
  • Adjust HLW calibration limits to accomodate HuaFan device and add commands HlwPSet, HlwUSet and HlwISet (#654)

5.4.0 20170725

  • Fix command reset regression introduced in 5.2.0
  • Increase polling from 0.1 second to 0.05 second
  • Add multipress to all buttons
  • Fix button 1 double press behaviour on multi relay devices
  • Add support for Hua Fan Smart Socket (#479)
  • Add support for Sonoff 4ch Pro (#565)
  • Add command SetOption13 1 to allow immediate action on single button press
  • (disables multipress, hold and unrestricted commands) (#587)

5.3.0 20170715

  • Major Hue rewrite which might introduce Alexa problems. If so, initiate an issue
  • Add support for Sonoff Led and BN-SZ01 Ceiling Led brightness control to Hue
  • Fix Sonoff Led Power, Dimmer and Color MQTT response (#176)
  • Add commands Delay and Backlog to allow multiple commands at once separated by ";" (#593)
  • Use default flashmode DOUT to solve restart hangs on esp8285 chips (#453, #598)
  • Change Web console column width from 99 to 300 (#599)

5.2.4 20170703

  • Removed flash mode update after selecting different module solving esp8285 related problems
  • Add device type flag to sonoff_template.ino
  • Change Sonoff Led Wakeup and add support for Sonoff BN-SZ01 Led (#567)

5.2.3 20170630

  • Change Sonoff Led color conversion code
  • Fix SetOption12 handling
  • Simplify auto configuration upgrade
  • Add option Upgrade <version_number> to only upgrade to any higher version (Old PR #213)
  • Change FallbackTopic to cmnd/<MQTTClient>/<command> <parameter> bypassing FullTopic and Prefix (#538)

5.2.2 20170625

  • Add configuration SaveAddress to Status 1 and Information Page
  • Change Sonoff Led Color conversion from AtoH to strtol
  • Fix possible wrong uploads due to configuration overwrites (#542)
  • Fix payload negative numbers (#547)

5.2.1 20170622

  • Fix Restore Configuration in case of lower version
  • Revert auto configuration upgrade allowing easy upgrade which was removed in version 5.2.0
  • Fix config auto upgrade from versions below version 4.1.1 (#530)

5.2.0 20170619

  • Add command SetOption12 1 to disable newly released configuration flash rotate to reduce flash wear
  • Fix command CounterDebounce by removing test for active GPIO (#524)
  • Add command SetOption33 1..250 to allow user configure POW Max_Power_Retry count (#525)

5.1.7 20170616

  • Prep removal of SetOptions alternatives
  • Restore webpage upgrade error messages removed in 5.1.5
  • Add hold button functionality to buttons 2 to 4
  • Add command SetOption32 1..100 to set Key Hold Time from 0.1 seconds to 10 seconds (#200)
  • Allow slashes in Topic, GroupTopic, ButtonTopic and SwitchTopic (#507)
  • Changed webpage form actions from post to get and use relative path url (#434, #522)

5.1.6 20170606

  • Shrink code
  • Removed online configuration of Domoticz In and Domoticz Out MQTT strings
  • Removed commands DomoticzInTopic and DomoticzOutTopic
  • Add define KEY_HOLD_TIME to configure button hold threshold before sending MQTT Hold message
  • Add command StateText4 to configure button MQTT Hold text (= MQTT_CMND_HOLD)
  • Add command SetOption11 0|1 to swap pushbutton single and double press functionality (#200)
  • Add command SwitchMode 5 (PUSHBUTTONHOLD) and 6 (PUSHBUTTONHOLD_INV) (#489)

5.1.5 20170604

  • Shrink code in preparation to ESP8266-Arduino 2.4.0-rc1
  • Add effect parameter to HUE Device (#464)

5.1.4 20170601

  • Removed pre-compiled versions from repository as they are available within the release
  • Changed HUE Device type to color supporting version (#464)
  • Fix compile error when BE_MINIMAL is selected (#467, #476)
  • Add multiple compiled versions to release using updated Travis script and platformio.ini (#467)

5.1.3 20170520

  • Add Domoticz Counter

5.1.2 20170519

  • Fix Counter/Timer JSON message and update Counter/Timer on webpage
  • Fix WS2812 Domoticz related regression issues

5.1.1 20170517

  • Allow command FullTopic in group mode
  • Prepare for more use of RTC memory
  • Add independant WS2812 led string power control (#386, #390)
  • Add command Counter to control up to four GPIO falling edge interrupt counters or timers (#459)
  • Add command CounterType to select between pulse counting or pulse timing
  • Add command CounterDebounce to select global counter debounce time in mSec

5.1.0 20170513

  • Fix Offline/Removal of retained topic when FullTopic is changed
  • Add FullTopic to MQTT Configuration and Information web pages
  • Add license model GPLv3 (#188)

5.0.7 20170511

  • Fix possible exception 28 on empty command
  • Add command SetOption0 as replacement for SaveState
  • Add command SetOption1 as replacement for ButtonRestrict
  • Add command SetOption2 as replacement for Units
  • Add command SetOption4 as replacement for MqttResponse
  • Add command SetOption8 as replacement for TempUnit
  • Add command SetOption10 On|Off to select between Offline or Removing previous retained topic (#417, #436)

5.0.6 20170510

  • Remove hyphen in case of a single DHT sensor connected (#427)
  • Add command MqttRetry to change default MQTT reconnect retry timer from minimal 10 seconds (#429)

5.0.5 20170508

  • Add command FullTopic with tokens %topic% (replaced by command Topic value) and
  • %prefix% (replaced by command Prefix values) for more flexible topic definitions (#244)
  • See wiki > MQTT Features https://github.com/arendst/Tasmota/wiki/MQTT-Features for more information

5.0.4 20170505

  • Add Sonoff Pow Energy Total up to 40 MWh
  • Add command EnergyReset 1|2|3 to reset Energy counters (#406)
  • Fix Domoticz Energy logging (#411)
  • Add command PowerOnState 4 to keep relay always on and disabling all power control (#418)

5.0.3 20170504

  • Add command SensorRetain on|off to enable retaining of mqtt message tele/sonoff/SENSOR (#74)
  • Change WifiConfig timeout from 60 seconds to 180 seconds (#212)
  • Change Sonoff Touch command Ledstate functionality by turning led on if power is off (#214)
  • Add 4 seconds delay after power on before enabling button to workaround Wemos D1 mini RTS circuit (#380)

5.0.2 20170503

  • Reset SaveData, SaveState and MqttResponse to default values due to rearranging settings
  • Moved some settings to flag area
  • Add command TempUnit Celsius|Fahrenheit for selecting Celsius or Fahrenheit (#347)
  • Add command TempRes 0..3 for selecting Temperature Resolution (#347)
  • Add command HumRes 0..3 for selecting Humidity Resolution (#347)
  • Add command PressRes 0..3 for selecting Pressure Resolution (#347)
  • Add command EnergyRes 0..5 for selecting Energy Resolution (#347)
  • Add "TempUnit":"C|F" to sensor JSON output (#347)
  • Add support for up to three DHT type sensors each using a different GPIO (#339, #404)

5.0.1 20170429

  • Adjust Sonoff SC messages to prepare for display feature
  • Move static data from RAM to Flash
  • Fix PowerOnState for some devices not reporting "Power on" state (#284, #380, #383)

5.0.0 20170425

  • Memory status message update
  • Fix setting migration to better preserve settings during move (#382)
  • Best practice is first doing a Backup Configuration before installing version 5.0.0
  • Reset save count after setting move
  • Start using new linker script without SPIFFS

4.2.0 20170424

  • Prepare for SPIFFS removal by moving settings to EEPROM area
  • Fix compilation error when webserver is disabled (#378)

4.1.3 20170410

  • Add user configuarble GPIO to module S20 Socket and Slampher
  • Add support for Sonoff SC (#112)
  • Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led firmware (#122)
  • Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions due to power supply instabilities (#122)
  • Add Access Point Mac Address to Status 11 and Telemetry (#329)
  • Fix DS18B20 negative temperature readings (#334)

4.1.2 20170403

  • Rename Unrecognised command to Unknown command
  • Remove all command lists
  • Remove command SmartConfig (superseded by WifiConfig)
  • Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non ESP8285 hardware
  • Add optional support for Toshiba and Mitsubishi HVAC IR control (needs updated IRremote8266 library) (#83, #257)
  • Add all configured switches to Domoticz Configuration web page (#305)
  • Fix compile error when selecting WS2812 DMA (#313)

4.1.1 20170329

  • Fix default Telemetry for command Prefix3
  • Fix webserver Module parameters for disabled select
  • Fix sensor status for enabled switches
  • Remove Light as alternative for Power (save code space)
  • Remove migration option from pre V3 (code cleanup)
  • Remove unofficial SPIFFS support (code cleanup)
  • Remove command list when unknown command is entered (save code space)
  • Rename Status11 json from StatusPWR to unique StatusSTS
  • Rename command Gateway to IPAddres2, Subnetmask to IPAddress3 and DnsServer to IPAddress4 (save code space)
  • Add Command MqttResponse to select either command or RESULT topic as response (#258)
  • Add command StateText1 to StateText3 to assign MQTT_STATUS_OFF, MQTT_STATUS_ON and MQTT_CMND_TOGGLE respectively (#286)
  • Remove restart after IPAddress changes (#292)
  • Add support for MAX31850 in xsns_ds18x20.ino (#295)
  • Fix possible uptime update misses (#302)

4.1.0 20170325

  • Change static IP addresses in user_config.h from list (using commas) to string (using dots)
  • Unify display result of commands Modules, Module and Gpios
  • Rewrite Module selection web page to bring size down from 18651 to 4319 bytes (!) (#234, #240)
  • Add basic support for (Lixada) H801 RGBWW controller (#252)
  • Add command Prefix1 to Prefix3 to assign SUB_PREFIX, PUB_PREFIX and PUB_PREFIX2 respectively (#255)
  • Add static ip addresses to flash (#262)
  • Add commands IpAddress, Gateway, Subnetmask and DnsServer to select static ip addresses (#273)

4.0.8 20170321

  • Fix entering non-numeric webpassword
  • Force selection between TLS or Webserver due to memory restraint (#240)
  • Allow entering empty string using "0" for selected commands (#242)
  • Fix exception when posting commands to web console containing % (#250)

4.0.7 20170319

  • Increased Sonoff Led PWM frequency from 432 to 1000
  • Fix possible watch dog reboot after changing module type on web page
  • Fix reporting of GPIO usage from web page
  • Fix Sonoff Led blank during firmware upgrade
  • Fix Sonoff Led flicker and possible flash corruption by using latest Arduino-esp8266 versions of pwm core files included in sonoff library (#211)
  • Add PWM output control with commands PWM1 to PWM5 using user selectable GPIOs (#211)
  • Fix exceptions due to low values of commands HlwPCal (10000), HlwUCal (1000) and HlwICal (2500) (#223)
  • Add Switch state to sensor status (#227, #233)
  • Add user configuarble GPIO to module Sonoff Touch (#228)
  • Add define WEB_PORT to user_config.h to change default web server port from 80 (#232)
  • Fix failed Ota Firmware upgrade started from Web page (#235)

4.0.6 20170316

  • Fix to better find device by Wifi hostname
  • Fix compile error when some I2C devices are disabled
  • Add (experimental) support for SHT1X emulating I2C (#97)
  • Add ADC to ElectroDragon (#203)
  • Add support for Sonoff Dev (#206)

4.0.5 20170314

  • Add command Status 11 to show power status with Vcc if define USE_ADC_VCC is enabled (default)
  • Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with define USE_ADC_VCC disabled (#137)
  • Add MQTT host:port to timeout message (#199)

4.0.4 20170312

  • Add pulse timers for up to 4 relays (#106)
  • Fix Sonoff Led power state when dimmer or color is 0 (#176)
  • Add command NtpServer to configure up to three NTP servers (#177)
  • Delete module User Test as module Wemos D1 mini has same/more user configurable GPIO (#178)
  • Add more user configurable GPIO to module ElectroDragon (#183)

4.0.3 20170309

  • Renamed Module NodeMCU to WeMos D1 mini
  • Add GPIO1 as user option to some modules
  • Add Buttons, Relays and Leds to user configurable options (#159)
  • Add description on Module parameters web page to some well known GPIOs (#107, #171)

4.0.2 20170308

  • Restore correct seriallog level after Serial logging was disabled
  • Add simple dimmer slider to Sonoff Led web page
  • Reduced root webpage size by 31%
  • Expand Status 2 with Build date/time and core version
  • Fix webserver redirection when not in WifiManager mode (#156)
  • Add command ButtonRestrict On/Off to restrict access to button hold and button multi press options above 2 (#161)
  • Fix DS18S20 negative temperature readings (#165)
  • Fix crlf compilation error due to bad syntax (#144, #167)

4.0.1 20170305

  • Fix char default sizes and set MESSZ to 360 (#143)
  • Fix SerialLog setting status
  • Disable syslog when emulation is active
  • Add DS18B20 web page display refresh

4.0.0 20170303

  • Add define to remove config migration code for versions below 3.0 (See Wiki-Upgrade-Migration path)
  • Free memory by switching from String to char[]
  • Raised Sonoff Led PWM frequency from 200Hz to 432Hz in search of stability (hardware watchdog timeouts) (#122)
  • Increase message size and suggested minimum MQTT_MAX_PACKET_SIZE to 512 (#114, #124)
  • Remove runtime warning message regarding MQTT_MAX_PACKET_SIZE too small as it is now moved to compile time (#124)
  • Fix possible panics with web console and http commands while UDP syslog is active (#127)
  • Add optional static IP address (#129)
  • Add define ENERGY_RESOLUTION in user_config.h to allow user control over precision (#136)

3.9.22 20170228

  • Update web console
  • Fix Status 4 JSON message
  • Add Exception info during restart if available
  • Add osWatch service to detect loop hangs that might happen during (OTA) upgrades
  • Add WiOn support for relay and switch only (#82, #102)
  • Allow for user specified relay count up to four in sonoff_template.h (#109)
  • Add support for HTU21 compatible I2C sensors SI7013, SI7020 and SI7021 (#118)
  • Add NodeMCU or Wemos configuration option (#119)

3.9.21 20170224

  • Add ajax to web root page and web console (#79)
  • Add commands SwitchMode1..4 and enable user switches 2, 3 and 4 (#84, #88)
  • Fix MQTT upgrade when webserver is active

3.9.20 20170221

  • Add minimal basic authentication to Web Admin mode (#87)
  • Fix Hue and add HSB support (#89)

3.9.19 20170219

  • Sonoff Led: Made GPIO04, 05 and 15 available for user
  • Sonoff Led: Add commands Fade, Speed, WakupDuration, Wakeup and LedTable

3.9.18 20170218

  • Fix ledstate 0 to turn off led
  • Fix Sonoff Led dimmer range (#16)
  • Change Sonoff Led command Dimmer to act on both cold and warm color
  • Add Sonoff Led command Color CCWW where CCWW are hexadecimal values fro 00 - FF
  • Reduce Sonoff Led flickering by disabling interrupts during flash save and disabling
  • Led during OTA upgrade and Web upload (#16)

3.9.17 20170217

  • Fix possible ArduinoJSON related memory fragmentation
  • Changed console logging using less memory
  • Add GPIO04 as user selectable for Sonoff Dual (#75)

3.9.16 20170214

  • Update latching relay handler
  • Add support for IR led using IRremoteESP8266 library (#59)
  • Add Hue argument passing using ArduinoJSON library (#59)

3.9.15 20170213

3.9.14 20170211

  • Add False and True as alternatives for 0/Off and 1/On (#49)
  • Fix Status10 JSON format (#52)
  • Fix DS18x20 using OneWire library (#53)

3.9.13 20170210

  • Add FlashChipMode to Status 4
  • Removed redundant DHT2 option and code
  • Add Sonoff SV GPIO pin 05 configuration (#40)
  • Add configuration file backup and restore via web page
  • Fix latency due to light_sleep mode even if sleep was set to zero (#50)

3.9.12 20170208

  • Fix compile error when webserver is disabled (#30)
  • Fix possible ESP8285 flash problem by updating Flash Chip Mode to DOUT during OTA upload
  • Fix hostname issues by not allowing user entry of string formatting and removing from user_config.h (#36)

3.9.11 20170204

  • Fix command I2Cscan
  • Fix not allowed spaces in Topic, ButtonTopic and SwitchTopic
  • Make all TELEMETRY, STATUS and COMMAND message topics unique (#4)
  • Advertise command topic to be used by iobroker (#299)
  • Fix butten (non)detection if no GPIO_KEY1 is defined (#13)
  • Change WeMo serialnumber from 7 decimal chars to 8 hexadecimal chars (#18)
  • Update web page with Build Date/Time, Emulation and mDNS Discovery and Advertise information (#21)

3.9.10 20170130

  • Add WS2812 Color Type selection (RGB or GRB) to user_config.h (#7)
  • Hue api changes to support HUE App(s) (#8)

3.9.9 20170130

  • Add command status 10 showing sensor data
  • Fix hlw status messages if hlw is disabled

3.9.8 20170130

  • Remove GPIO07 and GPIO08 from user selectable (#5)

3.9.7 20170129

  • Fix possible WS2812 exceptions when using emulation
  • Add command Emulation to dynamic configure Belkin WeMo and Hue Bridge for Alexa

3.9.6 20170129

  • Add dynamic sleep for WS2812 animation (#1)

3.9.5 20170128

  • Fix error message in case of wrong Domoticz command

3.9.4 20170127

  • Fix Sonoff Dual Relay switching (#287)

3.9.3 20170127

  • Add confirmation before Restart via webpage
  • Expand Domoticz Configuration webpage with Key, Switch and Sensor Index and
  • add commands DomoticzSwitchIdx and DomoticzSensorIdx (#86) (#174) (#219)
  • Fix default DHT11 sensor driver selection
  • Fix LedPower status after button press (#279)
  • Add command Sleep 0 - 250 mSec for optional light sleep mode to lower energy consumption (#272)
  • (Expect overall button/key/switch misses and wrong values on Sonoff Pow)
  • Add Hue brightness extension (#281)
  • Fix Hue brightness and change to call by reference (#283)

3.9.2 20170124

  • Add confirmation before Reset Configuration via webpage (#244)
  • Add WS2812 features (see Wiki commands)

3.9.1 20170124

  • Change PowerOnState function to only trigger when Power On (and not just restart) (#238)
  • Move HLW interrupts back to RAM and make WS2812_DMA optional as it generates Exception on Pow (#264)
  • Add charset=utf-8 to webpages (#266)
  • Update Hue emulation (#268)
  • Fix status module number
  • Add support for domoticz Dimmer on Sonoff_Led and WS2812
  • Fix possible ESP8285 flash problem by updating Flash Chip Mode to DOUT during web upload

3.2.6a 20170120

  • Fix Sonoff Pow compile error (#255)
  • Move HLW interrupts back to ROM (Needed for WS2812 DMA interrupts)
  • Removed all IO config from user_config.h as this will be done by commands or webpage
  • Removed MessageFormat and supports JSON only except POWER/LIGHT status
  • Add command LedPower to control main led (#247)
  • Add more FriendlyNames for Hue (#254)
  • Add DMA support for WS2812 when using pin 3 while other pins work just as well in my case...
  • Add HUE emulation for Alexa (#229)
  • Add basic WS2812 support (#229)
  • Fix Wemo when MQTT is disabled (#245)
  • Revert ButtonTopic and change SwitchTopic1 - 4 to one SwitchTopic
  • Rename MqttUnits to Units
  • Add Mqtt command to enable/disable MQTT

3.2.2a 20170115

  • Add dynamic (Sonoff) Module, user GPIO and sensor selection (one size fits (almost) all)
  • Add support for Sonoff LED
  • Add Seriallog disable after 600 seconds for Sonoff Dual and 4 Channel
  • Add ButtonTopic2 - 4, SwitchTopic1 - 4 and SwitchRetain

3.2.2 20170113

  • Fix PowerOnState 2 functionality after re-applying power (#230)

3.2.1 20170113

  • Fix some failed command decoding (#228)
  • Removed passwords from status messages (#216)

3.2.0 20170111

  • Add I2C BH1750 sensor (#222)
  • Sensor rewrite preparing for online selection

3.1.16 20170109

  • Fix Domoticz possible error condition
  • Remove Wifi password from connection message (#216)
  • Add Configure Other menu item to web page (#209)
  • Add command FriendlyName, field Friendly Name and define FRIENDLY_NAME to be used by Alexa
  • eliminating current use of MQTT_CLIENT_ID (#209)
  • Add friendlyname to webpage replacing former hostname

3.1.15 20170108

  • Fix Domoticz send key regression with Toggle command

3.1.14 20170107

  • Add support for command TOGGLE (define MQTT_CMND_TOGGLE) when ButtonTopic is in use and not equal to Topic (#207)

3.1.13 20170107

  • Fix web console command input when SUB_PREFIX contains '/' (#152)
  • Add command response to web command (#200)
  • Add option to disable MQTT as define USE_MQTT in user_config.h (#200)

3.1.12 20170106

  • Add OTA retry to solve possible HTTP transient errors (#204)
  • Fix MQTT host discovery

3.1.11 20170105

  • Add mDNS to advertise webserver as .local/

3.1.10 20170105

  • Fix ButtonTopic when SUB_PREFIX = PUB_PREFIX
  • Add workaround for possible MQTT queueing when SUB_PREFIX = PUB_PREFIX
  • Add optional MQTT host discovery using define USE_DISCOVERY in user_config.h (#115)

3.1.9 20170104

  • Fix Power Blink start position (toggled)
  • Change PulseTime increments: 1 .. 111 in 0.1 sec (max 11 seconds) and 112 .. 64900 in seconds (= 12 seconds until 18 hours) (#188)
  • Add support for SUB_PREFIX = PUB_PREFIX (#190)

3.1.8 20170103

  • Add retain flag to LWT offline and only send "tele/sonoff/LWT Offline" (#179)
  • Change retained LWT Online message to only send "tele/sonoff/LWT Online"

3.1.7 20161231

  • Add retained message LWT Online when sonoff makes MQTT connection (#179)

3.1.6 20161230

  • Add blinking using commands BlinkTime, BlinkCount and Power Blink|3|BlinkOff|4 (#165)

3.1.5 20161228

  • Fix serial space command exception (28)

3.1.4 20161227

  • Fix MQTT subscribe regression exception (3) (#162)
  • Fix serial empty command exception (28)

3.1.3 20161225

  • Extent Domoticz configuration webpage with optional indices (#153)
  • Fix multi relay legacy tele message from tele/sonoff/2/POWER to tele/sonoff/POWER2
  • Add support for iTead Motor Clockwise/Anticlockwise

3.1.2 20161224

  • Extent command PowerOnState with toggle at power on (option 2 is now option 3!) (#156)

3.1.1 20161223

  • Add support for Sonoff Touch and Sonoff 4CH (#40)
  • Update DomoticzIdx and DomoticzKeyIdx with relay/key index (DomoticzIdx1/DomoticzKeyIdx1)
  • Add command PowerOnState to control relay(s) at power on (#154)

3.1.0 20161221

  • Add Sonoff Pow measurement smoothing
  • Fix serial command topic preamble error (#151)
  • Fix 2.x to 3.x migration inconsistencies (#146)

3.0.9 20161218

  • Add Sonoff Pow voltage reading when relay is on but no load present (#123)

3.0.8 20161218

  • Add temperature conversion to Fahrenheit as option in user_config.h (TEMP_CONVERSION) (#145)

3.0.7 20161217

  • Add user_config_override.h to be used by user to override some defaults in user_config.h (#58)
  • Fix Sonoff Pow low power (down to 4W) intermittent measurements (#123)

3.0.6 20161217

  • Fix MQTT_CLIENT_ID starting with % sign as in "%06X" (#142)
  • Add auto power off after PulseTime### 0.1 Sec to relay 1 (#134)

3.0.5 20161215

  • Add more control over LED with command LedState options (#136, #143)
  • LED_OFF (0), LED_POWER (1), LED_MQTTSUB (2), LED_POWER_MQTTSUB (3), LED_MQTTPUB (4), LED_POWER_MQTTPUB (5), LED_MQTT (6), LED_POWER_MQTT (7)
  • Add option WIFI_RETRY (4) to command WifiConfig to allow connection retry to other AP without restart (#73)

3.0.4 20161211

  • Fix intermittent Domoticz update misses (#133)

3.0.3 20161210

  • Fix compiler warnings (#132)
  • Remove redundant code
  • Fix Domoticz pushbutton support

3.0.2 20161209

  • Add pushbutton to SwitchMode (#130)

3.0.1 20161209

  • Fix initial config

3.0.0 20161208

  • Migrate and clean-up flash layout
  • Settings from version 2.x are saved but settings from version 3.x can not be used with version 2.x
  • Change SEND_TELEMETRY_RSSI to SEND_TELEMETRY_WIFI and add AP and SSID to telemetry
  • Split long JSON messages
  • Fix inconsistent status messages
  • Fix all status messages to return JSON if enabled
  • Remove relay index in cmnd/sonoff//POWER now changed
  • to cmnd/sonoff/POWER for single relay units
  • and cmnd/sonoff/POWER for multi relay units like Sonoff dual
  • Add retain option to Power/Light status controlled by command PowerRetain On|Off (#126)

2.1.2 20161204

  • Add support for second wifi AP (#73)
  • Update command WifiConfig
  • Fix possible WifiManager hang

2.1.1a 20161203

  • Fix scan for wifi networks if WeMo is enabled
  • Fix syslog setting using web page

2.1.1 20161202

  • Add support for ElectroDragon second relay and button (only toggle with optional ButtonTopic) (#110)

2.1.0 20161202

  • Add optional EXPERIMENTAL TLS to MQTT (#49)
  • Fix MQTT payload handling (#111)
  • Optimzed WeMo code

2.0.21a 20161201

  • Fix WeMo PowerPlug emulation

2.0.21 20161130

  • Add Belkin WeMo PowerPlug emulation enabled with USE_WEMO_EMULATION in user_config.h (Heiko Krupp) (#105, #109)

2.0.20 20161130

  • Relax MQTTClient naming but only allows hexadecimal uppercase numbers (#107)
  • Add I2C support with command I2CScan
  • Add I2C sensor driver for HTU21 as alternate sensor using TH10/16 connectors (Heiko Krupp) (#105)
  • Add I2C sensor driver for BMP085/BMP180/BMP280/BME280 as alternate sensor using TH10/16 connectors

2.0.19a 20161127

  • Add support for ButtonTopic and ButtonRetain to wall switch function
  • Add pullup to SWITCH_PIN and command SwitchMode to syntax

2.0.18 20161126

  • Add SUB_PREFIX multi level support allowing 'cmnd' or 'cmnd/level2/level3'
  • Add wall switch function to GPIO14 and command SwitchMode (Alex Scott) (#103)

2.0.17 20161123

  • Calibrate HLWPCAL from 12345 to 12530
  • Add alternative sensor driver DHT2 using Adafruit DHT library
  • Add define MESSAGE_FORMAT to user_config.h
  • Throttle console messages
  • Shorten JSON messages
  • Fix possible Panic
  • Fix User mode webserver security

2.0.16 20161118

  • Add alternative sensor driver DS18x20 using OneWire library (#95)
  • Change sensor MQTT message from tele/sonoff/TEMPERATURE to tele/sonoff/DHT/TEMPERATURE or
  • tele/sonoff/DS18B20/TEMPERATURE or tele/sonoff/DS18x20/1/TEMPERATURE
  • Add sensors to root webpage and auto refresh every 4 seconds (#92)
  • Add optional JSON messageformat to all telemetry data
  • Enforce minimum TelePeriod to be 10 seconds
  • Fix Energy Yesterday reset after restart
  • Add Energy Today restore after controlled restart

2.0.15 20161116

  • Change TODAY_POWER and PERIOD_POWER to TODAY_ENERGY and PERIOD_ENERGY
  • Fix serial regression
  • Fix syslog hangs when loghost is unavailable

2.0.14 20161115

  • Add HLW threshold delay
  • Fix HLW intermittent current deviation
  • Fix button functionality during wificonfig
  • Add CRC check to DS18B20 sensor (#88)

2.0.13 20161113

  • Add additional upload error code descriptions
  • Add PlatformIO support (#80)

2.0.12 20161113

  • Fix Serial and Web response regression when no MQTT connection available
  • Fix Sonoff Dual power telemetric data for second relay
  • Removed MQTT password from Information web page
  • Hide MQTT password from Configure MQTT web page

2.0.11 20161111

  • Rewrite button and web toggle code
  • Fix NTP sync
  • Add HLW calibration commands HLWPCAL, HLWUCAL and HLWICAL (need define USE_POWERCALIBRATION)
  • Fix power threshold tests

2.0.10 20161109

  • Add additional Domoticz define (#63)
  • Add defines MQTT_STATUS_ON and MQTT_STATUS_OFF in user_config.h to select status On/Off string
  • Fix status response differences (#65)
  • Fix divide by zero exception (#70)
  • Fix syslog loop exception

2.0.9 20161108

  • clarify MODULE in user_config.h
  • Fix hlw false values

2.0.8 20161108

  • Add initial status after power on
  • Seperate driver files
  • Fix hlw code and calibrate Pow
  • Move user config defines to user_config.h (#61)

2.0.7 20161030

  • Make Ticker mandatory
  • Add Domoticz support (Increase MQTT_MAX_PACKET_SIZE to 400) (#54)
  • Add command MessageFormat 0|1 to select either legacy or JSON output

2.0.6 20161024

  • Add Sonoff Pow power factor
  • Initial support for up to four relays using iTEAD PSB (4Channel)
    • Currently only supports one button (All buttons behave the same)
    • Use command MODEL 4 to select four relay option
  • (After first power on it will support 2 relays like Sonoff Dual)
  • Fix ledstate
  • Add command Status 9 to display Sonoff Pow thresholds
  • Add commands PowerLow, PowerHigh, VoltageLow, VoltageHigh, CurrentLow and CurrentHigh for use
  • with Sonoff Pow thresholds

2.0.5 20161018

  • Add updates to user_config.h - moved SEND_TELEMETRY_DS18B20 and SEND_TELEMETRY_DHT to module area.
  • As Sonoff TH10/16 does not have the logic installed for GPIO04 You'll have to select ONE of both
  • Add Sonoff Pow support (experimental until Pow tested)
  • Add command Status 8 to display Sonoff Pow energy values
  • Add command MqttUnits On|Off to add units to values
  • Change web main page header character size
  • Change On/Off to ON/OFF status messages to satisfy openHAB
  • Change TEMP to TEMPERATURE and HUM to HUMIDITY

2.0.4 20161009

  • Add MQTT_BUTTON_RETAIN, SAVE_DATA and SAVE_STATE defines to user_config.h (#35)
  • Update ButtonRetain to remove retained message(s) from broker when turned off
  • Add Retain for second relay on Sonoff Dual
  • Provide power status messages with device topic index if requested

2.0.3 20161008

  • Update wifi initialization
  • Add command BUTTONRETAIN for optional MQTT retain on button press (#35)
  • Add command SAVESTATE to disable power state save. May be used with MQTT retain

2.0.2 20161006

  • Fix wifi issue 2186

2.0.1 20161002

  • Fix button press

2.0.0 20161002

  • Update Sonoff TH10/16 sensor pins (My TH10 only has GPIO14 connected)
  • Add full support for Sonoff dual

1.0.35 20160929

  • Add more lines to console
  • Add timeout and disable MQTT on web upload
  • Add command SAVEDATA to control parameter save (for flash wear afficionados) (#30)

1.0.34 20160926

  • Fix button press six and seven
  • Add more information to webserver

1.0.33 20160915

  • Better WPS error message
  • Separate webserver code from support.ino into webserver.ino
  • Fix webserver User by removing unwanted restart option

1.0.32 20160913

  • Add Wifi Protected Setup (WPS) as third option for initial config
  • Add command WIFICONFIG replacing deprecated command SMARTCONFIG
  • Add option WIFICONFIG 3 to start WPSconfig
  • Add option WIFICONFIG 0 to start saved Wifi config tool (WPSconfig, Smartconfig or Wifimanager)
  • Change button behaviour - See Wiki

1.0.31 20160907

  • Fix DS18B20 misread if teleperiod = 2
  • Tuned sensor code
  • Updated prefered ElectroDragon connection to Relay 1 and Button 1
  • Moved SONOFF and ELECTRO_DRAGON port config to user_config.h

1.0.30 20160902

  • Fix command TELEPERIOD 0
  • Add ESP- tag to UDP log message for easy rsyslogd filtering
  • Add ElectroDragon (Relay 2 only) functionality. Select with #define MODULE ELECTRO_DRAGON
  • Add ? as null message alternative
  • Add DHT temperature and humidity telemetry support. Enable with #define SEND_TELEMETRY_DHT
  • Add DS18B20 temperature telemetry support. Enable with #define SEND_TELEMETRY_DS18B20
  • Restrict HOSTNAME, MQTTCLIENT, TOPIC and BUTTONTOPIC in topic mode only

1.0.29 20160831

  • Allow UPGRADE, OTAURL, RESTART, RESET, MQTTHOST, MQTTPORT, MQTTUSER, MQTTPASSWORD and WEBSERVER also in group mode

1.0.28 20160831

  • Add webserver state to status 5
  • Add optional PUB_PREFIX2 (tele) for telemetry usage
  • Add command TELEPERIOD
  • Fix syntax message
  • Change memory status display

1.0.27 20160831

  • Add sketch flash size
  • Add console to webserver
  • Add command weblog
  • Change WifiManager web pages to minimal
  • Change display default hostname and MQTT client id in webserver
  • Change HTTP command interface to http://sonoff-1234/cm?cmnd=light 2
  • Change HEARTBEAT to UPTIME

1.0.26 20160829

  • Add define USE_WEBSERVER to disable web server code in source
  • Add file upload as alternative for ota upload to webserver
  • Add information to webserver
  • Add command hostname
  • Add command logport
  • Change HTTP command interface to http://sonoff-1234/cmd?cmnd=light 2
  • Change button behaviour with regards to Smartconfig and OTA upload. See README.md
  • Enforce default hostname to either "%s-%04d" or user defined without any %
  • Enforce default mqtt client id to either "DVES_%06X" or user defined without any %

1.0.25 20160822

  • Remove config system halts to keep ota available

1.0.24 20160821

  • Add test for MQTT_SUBTOPIC
  • Change log range to LOG_LEVEL_ALL
  • Change MQTT introduction messages
  • Moved MQTT_MAX_PACKET_SIZE warning message to introduction messages

1.0.23 20160821

  • Add option USE_SPIFFS to move config from flash to spiffs
  • Add webserver with options 0 (off), 1 (user) and 2 (admin)
  • Add HTTP command interface (http://sonoff-1234/c?cmnd=light 2)
  • Add wifimanager countdown counter
  • Add command line webpage
  • Add relay control to wifimanager
  • Add restart option 99 to force restart
  • Fix wifi hostname
  • Fix NETBIOS hostname problem by reducing default hostname length
  • Fix possible exception if WIFI_HOSTNAME is changed
  • Fix upgrade messages
  • Reduce memory use by redesigning config routines
  • Split syntax message
  • Rename define SERIAL_IO to USE_SERIAL

1.0.22 20160814

  • Add all MQTT parameters for configuration
  • Add wifimanager to configure Wifi and MQTT via web server
  • Change NTP time handling
  • Fix Smartconfig parameter buffer overflow
  • Fix PlatformIO warnings

1.0.21 20160808

  • Remove semaphore as subscription flooding (more than 15 subscriptions per second) is managed by SDK (LmacRxBlk:1)
  • Add optional RTC interrupt (define USE_TICKER) to keep RTC synced during subscription flooding
  • Remove heartbeatflag

1.0.20 20160805

  • Add semaphore to handle out of memory when too many subscriptions requested
  • Use Daylight Saving (DST) parameters from user_config.h when timezone = 99
  • Add status 7 option displaying RTC information
  • Add ledstate to status 0

1.0.19 20160803

  • Fix possible MQTT_CLIENT_ID induced Exception(28)

1.0.18 20160803

  • Moved Cfg_Default
  • Fix negative data handling
  • Remove MQTT information from status 1 and add labels to status 1
  • Add mac address to status 5
  • Add MQTT ClientId, UserId and Password to status 6

1.0.17 20160731

  • Better variable range checking
  • Change ambiguous connection messages
  • Add timestamp to serial message

1.0.16 20160729

  • Moved wifi, rtc, syslog and config to support.ino
  • Fixed button action when buttontopic is used. Introduced with 1.0.15
  • Better buffer overflow checks (strlcpy)

1.0.15 20160728

  • Removed pubsubclient config changes from sonoff.ino as it doesn't work
  • reapply MQTT_MAX_PACKET_SIZE 256 and MQTT_KEEPALIVE 120 to PubSubClient.h
  • Add status 0 option displaying all status messages
  • Change MQTT_MAX_PACKET_SIZE from 1024 to 256
  • Add buffer overflow checks (snprintf and strncpy)
  • Implemented common string sizes

1.0.14 20160722

  • Seperate user config from sonoff.ino to user_config.h (pucebaboon)
  • Change defaults from sidnas2 to domus1
  • Add MQTT status message as status 6 (pucebaboon)
  • Add status type to message (pucebaboon)
  • Add pubsubclient config changes to sonoff.ino (pucebaboon)

1.0.13 20160702

  • Add Ledstate 1 option to show power state on led

1.0.12 20160529

  • Allow disable of button topic using "0"

1.0.11 20160524

  • Provide button response if MQTT connection lost

1.0.10 20160520

  • Add optional button topic to assist external MQTT clients
  • Change version notation
  • Reset default values

1.0.9 20160503

  • Add more blinks
  • Add reset 2 option erasing flash
  • Add status 5 option displaying network info
  • Add syslog check for Wifi connection
  • Resize MqttPublish log array
  • Change Wifi smartconfig active from 100 to 60 seconds
  • Update Wifi initialization

1.0.8 20160430

  • Remove use of Wifi config data from SDK
  • Add status 3 (syslog info) and status 4 (flash info)
  • Add restart option to button (5 quick presses)

1.0.7 20160420

  • Add UDP syslog support
  • Change HOST command to MQTTHOST command
  • Add commands SYSLOG, SERIALLOG and LOGHOST
  • Change hostname to lower case to distinguise between open-sdk version
  • Add support for ESP-12F used in my modified wkaku power socket switch
  • Fix timezone command
  • Add RTC month names for future use
  • Modify button code
  • Remove initialization errors by better use of MQTT loop

1.0.6 20160406

  • Removed Wifi AP mode (#1)
  • Add test for Arduino IDE version >= 1.6.8
  • Fix RTC time sync code

1.0.5 20160310

  • Initial public release
  • Show debug info by selecting option from IDE Tools Debug port: Serial