Single-channel square-wave with adjustable pulse-width.
3 Levels of volume: 0%, 50%, 100%
Register`` ``0x71,`` ``Bit`` ``0`` ``to`` ``1
0 = 0% (Silence)
1 = 50%
2 = 50%
3 = 100% (Full volume)
Can read back timer values (since sound is assigned to Timer 3).
To hear sound, you must:
- Enable Timer 3 (with Registers 0x19, 0x1C, 0x1D, 0x48 and 0x49, check Timers)
- Configure Timer 3 with the Preset & Pivot (Based of the frequency and pulse-width) (with Registers 0x4A to 0x4D, check Timers)
- Set volume to 50% or 100% (with Register 0x71)
- NOTE: Pulse of 0% or 100% will not be audible
Some useful information:
- To generate Square-Wave, use Timer 3 Pivot with half the value of the Timer 3 Preset.
- Commercial games use very small Pulse-Width length to generate weak sounds (for example when Music Volume is 25%).
Timer3_Frequency = The Timer 3 counting speed in Hz (Check Timers)
Sound_Frequency = The frequency of the note in Hz
Preset_Value = Timer 3 Preset value (to be written in Registers 0x4A and 0x4B)
Sound_Pivot = Timer 3 Pivot value (to be written in Registers 0x4C and 0x4D)
Pulse_Width = Pulse-Width from 0.0 to 1.0 (e.g. 0.0 = 0%, 0.5 = 50% (Square), 1.0 = 100%)
Preset_Value = (Timer3_Frequency / Sound_Frequency) - 1
Sound_Frequency = Timer3_Frequency / (Preset_Value + 1)
Sound_Pivot = Preset_Value * Pulse_Width
Pulse_Width = Sound_Pivot / Preset_Value