trc.node

Terracoin node AMI app - runs system, master or gateway node.

All commands should be executed as root or with sudo.

Setup

1. Install ami if not installed already
   • wget https://raw.githubusercontent.com/cryon-io/ami/master/install.sh -O /tmp/install.sh && sh /tmp/install.sh
2. Create directory for your application (it should not be part of user home folder structure, you can use for example /mns/lqx1)
3. Create app.json or app.hjson with app configuration you like, e.g.:

{
    "id": "trc1",
    "type": {
        "id": "posmn.trc.node"
    },
    "configuration": {
        "NODE_PRIVKEY" : "xxxxxxxxxxxxxxxxxxxxxxxxx",
        "DAEMON_CONFIGURATION": {
            "externalip" : "127.0.0.1"
        }
    },
    "user": "trc",
}

Node types are: masternode, systemnode.

1. Run ami --path=<your app path> setup
   • e.g. ami --path=/mns/trc1 . Run ami --path=<your app path> --help to investigate available commands
2. Start your node with ami --path=<your app path> start
3. Check info about the node ami --path=<your app path> info

Configuration change:

1. ami --path=<your app path> stop
2. change app.json or app.hjson as you like
3. ami --path=<your app path> setup --configure
4. ami --path=<your app path> start

Remove app:

1. ami --path=<your app path> stop
2. ami --path=<your app path> remove --all

Reset app:

1. ami --path=<your app path> stop
2. ami --path=<your app path> remove - removes app data only
3. ami --path=<your app path> start

Remove lqxd database:

1. ami --path=<your app path> stop
2. ami --path=<your app path> removedb
3. ami --path=<your app path> start

Troubleshooting

Run ami with -ll=trace to enable trace level printout, e.g.: ami --path=/mns/trc1 -ll=trace setup