-
Notifications
You must be signed in to change notification settings - Fork 229
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[ENHANCEMENT] Add 1.2mm per-tool nozzle size selection (XL) #3697
Comments
Just wrote PR #3699 for your request. |
This issue has been flagged as stale because it has been open for 60 days with no activity. The issue will be closed in 7 days unless someone removes the "stale" label or adds a comment. |
Actually, I now own a Slice Engineering GammaMaster 2.4mm nozzle (yes, two point four millimetres). Please support sizes up to 2.4mm. |
New version of the firmware 6.1.2 should contain the fix, can you test that? |
I can't find where you set the nozzle diameter in 6.1.2. The setting seems to have disappeared. I'll try to get through to live chat and ask them. |
@danopernis testing is pending #4152. But from code inspection, the range appears to be limited to max 1.2mm, so for example the 2.4mm nozzle noted above cannot be properly set up. Please extend the range accordingly. |
@tg73 I could add 2.4mm as well as a PR, but I don't see that this will make it in the release, as it is no "common" nozzle size and thus won't be officially supported and considered to be a "mod". |
Enter what type of printer or upgrade the enhancement applies to.
Printer type - [XL]
Describe the expected functionality
Under Settings->Tools->Tool->Nozzle Diameter, only sizes up to 1.0mm can be selected. 1.2mm nozzles are available. Please add 1.2mm to the list.
The text was updated successfully, but these errors were encountered: