You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
The electronics enclosure should have a bottom panel to keep stray fingers away from mains wiring.
I am currently running a printed one. I will get the file published for feedback/use by others. Longer-term, this should really be a standard part CNC cut with the other side panels.
The text was updated successfully, but these errors were encountered:
It's designed with some stiffening ribs to hold up better as a printed part. I like that it's got ventilation slots in it to allow airflow, but does not have the relatively large opening in the dxf linked above, as that seems like it'd still allow fingers.
In a perfect world we'd get a CNC-cut panel included in the panel kits with a similar design.
Actually, I'm using two blank sides, and the large opening bottom panel has been used with the intent to design a cover for that hole, which allows the z axis steppers, and incorporates the power socket for power into it.
The electronics enclosure should have a bottom panel to keep stray fingers away from mains wiring.
I am currently running a printed one. I will get the file published for feedback/use by others. Longer-term, this should really be a standard part CNC cut with the other side panels.
The text was updated successfully, but these errors were encountered: