From 5a66a8be8b06c4fa9d1eef8c48b3690fd758c0c6 Mon Sep 17 00:00:00 2001 From: rasmus-kirk Date: Wed, 7 Aug 2024 00:07:45 +0200 Subject: [PATCH] Fixes --- docs/wiki/vpn/ports/index.md | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/docs/wiki/vpn/ports/index.md b/docs/wiki/vpn/ports/index.md index 60959da..0473482 100644 --- a/docs/wiki/vpn/ports/index.md +++ b/docs/wiki/vpn/ports/index.md @@ -4,18 +4,18 @@ title: Opening Ports In order to open a port through a VPN you need to open a port with your VPN-provider. -> **Note:** Not all VPN-providers support this feature! Notably, Mullvad does not anymore! +**Note:** Not all VPN-providers support this feature! Notably, Mullvad does not anymore! -> **Note:** The port present in the -> [nixarr.vpn.wgConf](https://nixarr.com/options.html#nixarr.vpn.wgconf), -> should not be used for any options! +**Note:** The port present in the + [nixarr.vpn.wgConf](https://nixarr.com/options.html#nixarr.vpn.wgconf), + should not be used for any options! ## AirVPN Go to the [ports page](https://airvpn.org/ports/) at AirVPN's website open a port. After opening it should look like this: -![An open port on AirVPN, the port number that should be used in Nixarr is 12345.](./airvpn.png) +![An open port on AirVPN, the port number that should be used in Nixarr is 12345.](airvpn.png) Then you can set that port for a service, for example @@ -30,10 +30,10 @@ Then you can set that port for a service, for example ## Debugging Ports You can debug an open port using the -`[vpnTestService](https://nixarr.com/options.html#nixarr.vpn.vpntestservice.enable)`. +[nixarr.vpn.vpnTestService](https://nixarr.com/options.html#nixarr.vpn.vpntestservice.enable). If the DNS and IP checks out, it will open a `netcat` instance on the port specified in -`[vpnTestService.port](https://nixarr.com/options.html#nixarr.vpn.vpntestservice.port)`. +[nixarr.vpn.vpnTestService.port](https://nixarr.com/options.html#nixarr.vpn.vpntestservice.port). You can then run: ```sh