sysrepo.h

/**
 * @file sysrepo.h
 * @author Rastislav Szabo <raszabo@cisco.com>, Lukas Macko <lmacko@cisco.com>
 * @brief Sysrepo Client Library public API.
 *
 * @copyright
 * Copyright 2015 Cisco Systems, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef SYSREPO_H_
#define SYSREPO_H_

/**
 * @defgroup cl Client Library
 * @{
 *
 * @brief Provides the public API towards applications using sysrepo to store
 * their configuration data, or towards management agents.
 *
 * Communicates with Sysrepo Engine (@ref cm), which is running either inside
 * of dedicated sysrepo daemon, or within this library if daemon is not alive.
 *
 * Access to the sysrepo datastore is connection- and session- oriented. Before
 * calling any data access/manipulation API, one needs to connect to the datastore
 * via ::sr_connect and open a session via ::sr_session_start. One connection
 * can serve multiple sessions.
 *
 * Each data access/manipulation request call is blocking - blocks the connection
 * until the response from Sysrepo Engine comes, or until an error occurs. It is
 * safe to call multiple requests on the same session (or different session that
 * belongs to the same connection) from multiple threads at the same time,
 * however it is not effective, since each call is blocked until previous one
 * finishes. If you need fast multi-threaded access to sysrepo, use a dedicated
 * connection for each thread.
 *
 * @see
 * See @ref main_page "Sysrepo Introduction" for details about sysrepo architecture.
 * @see
 * @ref xp_page "XPath Addressing" is used for node identification in data-related calls.
 */

#include <stdbool.h>
#include <stdint.h>
#include <stdlib.h>


////////////////////////////////////////////////////////////////////////////////
// Common typedefs and API
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Sysrepo connection context used to identify a connection to sysrepo datastore.
 */
typedef struct sr_conn_ctx_s sr_conn_ctx_t;

/**
 * @brief Sysrepo session context used to identify a configuration session.
 */
typedef struct sr_session_ctx_s sr_session_ctx_t;

/**
 * @brief Memory context used for efficient memory management for values, trees and GPB messages.
 */
typedef struct sr_mem_ctx_s sr_mem_ctx_t;

/**
 * @brief Possible types of an data element stored in the sysrepo datastore.
 */
typedef enum sr_type_e {
    /* special types that does not contain any data */
    SR_UNKNOWN_T,              /**< Element unknown to sysrepo (unsupported element). */
    SR_TREE_ITERATOR_T,        /**< Special type of tree node used to store all data needed for iterative tree loading. */

    SR_LIST_T,                 /**< List instance. ([RFC 6020 sec 7.8](http://tools.ietf.org/html/rfc6020#section-7.8)) */
    SR_CONTAINER_T,            /**< Non-presence container. ([RFC 6020 sec 7.5](http://tools.ietf.org/html/rfc6020#section-7.5)) */
    SR_CONTAINER_PRESENCE_T,   /**< Presence container. ([RFC 6020 sec 7.5.1](http://tools.ietf.org/html/rfc6020#section-7.5.1)) */
    SR_LEAF_EMPTY_T,           /**< A leaf that does not hold any value ([RFC 6020 sec 9.11](http://tools.ietf.org/html/rfc6020#section-9.11)) */

    /* types containing some data */
    SR_BINARY_T,       /**< Base64-encoded binary data ([RFC 6020 sec 9.8](http://tools.ietf.org/html/rfc6020#section-9.8)) */
    SR_BITS_T,         /**< A set of bits or flags ([RFC 6020 sec 9.7](http://tools.ietf.org/html/rfc6020#section-9.7)) */
    SR_BOOL_T,         /**< A boolean value ([RFC 6020 sec 9.5](http://tools.ietf.org/html/rfc6020#section-9.5)) */
    SR_DECIMAL64_T,    /**< 64-bit signed decimal number ([RFC 6020 sec 9.3](http://tools.ietf.org/html/rfc6020#section-9.3)) */
    SR_ENUM_T,         /**< A string from enumerated strings list ([RFC 6020 sec 9.6](http://tools.ietf.org/html/rfc6020#section-9.6)) */
    SR_IDENTITYREF_T,  /**< A reference to an abstract identity ([RFC 6020 sec 9.10](http://tools.ietf.org/html/rfc6020#section-9.10)) */
    SR_INSTANCEID_T,   /**< References a data tree node ([RFC 6020 sec 9.13](http://tools.ietf.org/html/rfc6020#section-9.13)) */
    SR_INT8_T,         /**< 8-bit signed integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    SR_INT16_T,        /**< 16-bit signed integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    SR_INT32_T,        /**< 32-bit signed integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    SR_INT64_T,        /**< 64-bit signed integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    SR_STRING_T,       /**< Human-readable string ([RFC 6020 sec 9.4](http://tools.ietf.org/html/rfc6020#section-9.4)) */
    SR_UINT8_T,        /**< 8-bit unsigned integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    SR_UINT16_T,       /**< 16-bit unsigned integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    SR_UINT32_T,       /**< 32-bit unsigned integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    SR_UINT64_T,       /**< 64-bit unsigned integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
} sr_type_t;

/**
 * @brief Data of an element (if applicable), properly set according to the type.
 */
typedef union sr_data_u {
    char *binary_val;       /**< Base64-encoded binary data ([RFC 6020 sec 9.8](http://tools.ietf.org/html/rfc6020#section-9.8)) */
    char *bits_val;         /**< A set of bits or flags ([RFC 6020 sec 9.7](http://tools.ietf.org/html/rfc6020#section-9.7)) */
    bool bool_val;          /**< A boolean value ([RFC 6020 sec 9.5](http://tools.ietf.org/html/rfc6020#section-9.5)) */
    double decimal64_val;   /**< 64-bit signed decimal number ([RFC 6020 sec 9.3](http://tools.ietf.org/html/rfc6020#section-9.3)) */
    char *enum_val;         /**< A string from enumerated strings list ([RFC 6020 sec 9.6](http://tools.ietf.org/html/rfc6020#section-9.6)) */
    char *identityref_val;  /**< A reference to an abstract identity ([RFC 6020 sec 9.10](http://tools.ietf.org/html/rfc6020#section-9.10)) */
    char *instanceid_val;   /**< References a data tree node ([RFC 6020 sec 9.13](http://tools.ietf.org/html/rfc6020#section-9.13)) */
    int8_t int8_val;        /**< 8-bit signed integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    int16_t int16_val;      /**< 16-bit signed integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    int32_t int32_val;      /**< 32-bit signed integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    int64_t int64_val;      /**< 64-bit signed integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    char *string_val;       /**< Human-readable string ([RFC 6020 sec 9.4](http://tools.ietf.org/html/rfc6020#section-9.4)) */
    uint8_t uint8_val;      /**< 8-bit unsigned integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    uint16_t uint16_val;    /**< 16-bit unsigned integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    uint32_t uint32_val;    /**< 32-bit unsigned integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
    uint64_t uint64_val;    /**< 64-bit unsigned integer ([RFC 6020 sec 9.2](http://tools.ietf.org/html/rfc6020#section-9.2)) */
} sr_data_t;

/**
 * @brief Structure that contains value of an data element stored in the sysrepo datastore.
 */
typedef struct sr_val_s {
    /**
     * Memory context used internally by Sysrepo for efficient storage
     * and conversion of this structure.
     */
    sr_mem_ctx_t *_sr_mem;

    /**
     * XPath identifier of the data element, as defined in
     * @ref xp_page "XPath Addressing" documentation or at
     * https://tools.ietf.org/html/draft-ietf-netmod-yang-json#section-6.11
     */
    char *xpath;

    /** Type of an element. */
    sr_type_t type;

    /**
     * Flag for node with default value (applicable only for leaves).
     * It is set to TRUE only if the value was *implicitly* set by the datastore as per
     * module schema. Explicitly set/modified data element (through the sysrepo API) always
     * has this flag unset regardless of the entered value.
     */
    bool dflt;

    /** Data of an element (if applicable), properly set according to the type. */
    sr_data_t data;

} sr_val_t;

/**
 * @brief A data element stored in the sysrepo datastore represented as a tree node.
 *
 * @note Can be safely casted to sr_val_t, only *xpath* member will point to node name rather
 * than to an actual xpath.
 */
typedef struct sr_node_s {
    /**
     * Memory context used internally by Sysrepo for efficient storage
     * and conversion of this structure.
     */
    sr_mem_ctx_t *_sr_mem;

    /** Name of the node. */
    char *name;

    /** Type of an element. */
    sr_type_t type;

    /** Flag for default node (applicable only for leaves). */
    bool dflt;

    /** Data of an element (if applicable), properly set according to the type. */
    sr_data_t data;

    /**
     * Name of the module that defines scheme of this node.
     * NULL if it is the same as that of the predecessor.
     */
    char *module_name;

    /** Pointer to the parent node (NULL in case of root node). */
    struct sr_node_s *parent;

    /** Pointer to the next sibling node (NULL if there is no one). */
    struct sr_node_s *next;

    /** Pointer to the previous sibling node (NULL if there is no one). */
    struct sr_node_s *prev;

    /** Pointer to the first child node (NULL if this is a leaf). */
    struct sr_node_s *first_child;

    /** Pointer to the last child node (NULL if this is a leaf). */
    struct sr_node_s *last_child;
} sr_node_t;

/**
 * @brief Sysrepo error codes.
 */
typedef enum sr_error_e {
    SR_ERR_OK = 0,             /**< No error. */
    SR_ERR_INVAL_ARG,          /**< Invalid argument. */
    SR_ERR_NOMEM,              /**< Not enough memory. */
    SR_ERR_NOT_FOUND,          /**< Item not found. */
    SR_ERR_INTERNAL,           /**< Other internal error. */
    SR_ERR_INIT_FAILED,        /**< Sysrepo infra initialization failed. */
    SR_ERR_IO,                 /**< Input/Output error. */
    SR_ERR_DISCONNECT,         /**< The peer disconnected. */
    SR_ERR_MALFORMED_MSG,      /**< Malformed message. */
    SR_ERR_UNSUPPORTED,        /**< Unsupported operation requested. */
    SR_ERR_UNKNOWN_MODEL,      /**< Request includes unknown schema */
    SR_ERR_BAD_ELEMENT,        /**< Unknown element in existing schema */
    SR_ERR_VALIDATION_FAILED,  /**< Validation of the changes failed. */
    SR_ERR_OPERATION_FAILED,   /**< An operation failed. */
    SR_ERR_DATA_EXISTS,        /**< Item already exists. */
    SR_ERR_DATA_MISSING,       /**< Item does not exists. */
    SR_ERR_UNAUTHORIZED,       /**< Operation not authorized. */
    SR_ERR_INVAL_USER,         /**< Invalid username. */
    SR_ERR_LOCKED,             /**< Requested resource is already locked. */
    SR_ERR_TIME_OUT,           /**< Time out has expired. */
    SR_ERR_RESTART_NEEDED,     /**< Sysrepo Engine restart is needed. */
} sr_error_t;

/**
 * @brief Detailed sysrepo error information.
 */
typedef struct sr_error_info_s {
    const char *message;  /**< Error message. */
    const char *xpath;    /**< XPath to the node where the error has been discovered. */
} sr_error_info_t;

/**
 * @brief Returns the error message corresponding to the error code.
 *
 * @param[in] err_code Error code.
 *
 * @return Error message (statically allocated, do not free).
 */
const char *sr_strerror(int err_code);

/**
 * @brief Log levels used to determine if message of certain severity should be printed.
 */
typedef enum {
    SR_LL_NONE,  /**< Do not print any messages. */
    SR_LL_ERR,   /**< Print only error messages. */
    SR_LL_WRN,   /**< Print error and warning messages. */
    SR_LL_INF,   /**< Besides errors and warnings, print some other informational messages. */
    SR_LL_DBG,   /**< Print all messages including some development debug messages. */
} sr_log_level_t;

/**
 * @brief Enables / disables / changes log level (verbosity) of logging to
 * standard error output.
 *
 * By default, logging to stderr is disabled. Setting log level to any value
 * other than SR_LL_NONE enables the logging to stderr. Setting log level
 * back to SR_LL_NONE disables the logging to stderr.
 *
 * @param[in] log_level requested log level (verbosity).
 */
void sr_log_stderr(sr_log_level_t log_level);

/**
 * @brief Enables / disables / changes log level (verbosity) of logging to system log.
 *
 * By default, logging into syslog is disabled. Setting log level to any value
 * other than SR_LL_NONE enables the logging into syslog. Setting log level
 * back to SR_LL_NONE disables the logging into syslog.
 *
 * @note Please note that enabling logging into syslog will overwrite your syslog
 * connection settings (calls openlog), if you are connected to syslog already.
 *
 * @param[in] log_level requested log level (verbosity).
 */
void sr_log_syslog(sr_log_level_t log_level);

/**
 * @brief Sets callback that will be called when a log entry would be populated.
 *
 * @param[in] level Verbosity level of the log entry.
 * @param[in] message Message of the log entry.
 */
typedef void (*sr_log_cb)(sr_log_level_t level, const char *message);

/**
 * @brief Sets callback that will be called when a log entry would be populated.
 * Callback will be called for each message with any log level.
 *
 * @param[in] log_callback Callback to be called when a log entry would populated.
 */
void sr_log_set_cb(sr_log_cb log_callback);


////////////////////////////////////////////////////////////////////////////////
// Connection / Session Management
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Flags used to override default connection handling by ::sr_connect call.
 */
typedef enum sr_conn_flag_e {
    SR_CONN_DEFAULT = 0,          /**< Default behavior - instantiate library-local Sysrepo Engine if
                                       the connection to sysrepo daemon is not possible. */
    SR_CONN_DAEMON_REQUIRED = 1,  /**< Require daemon connection - do not instantiate library-local Sysrepo Engine
                                       if the library cannot connect to the sysrepo daemon  (and return an error instead). */
    SR_CONN_DAEMON_START = 2,     /**< If sysrepo daemon is not running, and SR_CONN_DAEMON_REQUIRED was specified,
                                       start it (only if the process calling ::sr_connect is running under root privileges). */
} sr_conn_flag_t;

/**
 * @brief Options overriding default connection handling by ::sr_connect call,
 * it is supposed to be bitwise OR-ed value of any ::sr_conn_flag_t flags.
 */
typedef uint32_t sr_conn_options_t;

/**
 * @brief Flags used to override default session handling (used by ::sr_session_start
 * and ::sr_session_start_user calls).
 */
typedef enum sr_session_flag_e {
    SR_SESS_DEFAULT = 0,      /**< Default (normal) session behavior. */
    SR_SESS_CONFIG_ONLY = 1,  /**< Session will process only configuration data (e.g. sysrepo won't
                                   return any state data by ::sr_get_items / ::sr_get_items_iter calls). */
} sr_session_flag_t;

/**
 * @brief Options overriding default connection session handling,
 * it is supposed to be bitwise OR-ed value of any ::sr_session_flag_t flags.
 */
typedef uint32_t sr_sess_options_t;

/**
 * @brief Data stores that sysrepo supports. Both are editable via implicit candidate.
 * To make changes permanent in edited datastore ::sr_commit must be issued.
 * @see @ref ds_page "Datastores & Sessions" information page.
 */
typedef enum sr_datastore_e {
    SR_DS_STARTUP = 0,    /**< Contains configuration data that should be loaded by the controlled application when it starts. */
    SR_DS_RUNNING = 1,    /**< Contains currently applied configuration and state data of a running application.
                               @note This datastore is supported only by applications that subscribe for notifications
                               about the changes made in the datastore (e.g. ::sr_module_change_subscribe). */
    SR_DS_CANDIDATE = 2,  /**< Contains configuration that can be manipulated without impacting the current configuration.
                               Its content is set to the content of running datastore by default. Changes made within
                               the candidate can be later committed to the running datastore or copied to any datastore.

                               @note The main difference between working with running and candidate datastore is in commit
                               operation - commit of candidate session causes the content of running configuration to be set
                               the value of the candidate configuration (running datastore is overwritten), whereas commit of
                               runnnig session merges the changes made within the session with the actual state of running. */
} sr_datastore_t;

/**
 * @brief Connects to the sysrepo datastore (Sysrepo Engine).
 *
 * @note If the client library loses connection to the Sysrepo Engine during
 * the lifetime of the application, all Sysrepo API calls will start returning
 * ::SR_ERR_DISCONNECT error. In this case, the application is supposed to reconnect
 * with another ::sr_connect call and restart all lost sessions.
 *
 * @param[in] app_name Name of the application connecting to the datastore
 * (can be a static string). Used only for accounting purposes.
 * @param[in] opts Options overriding default connection handling by this call.
 * @param[out] conn_ctx Connection context that can be used for subsequent API calls
 * (automatically allocated, it is supposed to be released by the caller using ::sr_disconnect).
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_connect(const char *app_name, const sr_conn_options_t opts, sr_conn_ctx_t **conn_ctx);

/**
 * @brief Disconnects from the sysrepo datastore (Sysrepo Engine).
 *
 * Cleans up and frees connection context allocated by ::sr_connect. All sessions
 * started within the connection will be automatically stopped and cleaned up too.
 *
 * @param[in] conn_ctx Connection context acquired with ::sr_connect call.
 */
void sr_disconnect(sr_conn_ctx_t *conn_ctx);

/**
 * @brief Starts a new configuration session.
 *
 * @see @ref ds_page "Datastores & Sessions" for more information about datastores and sessions.
 *
 * @param[in] conn_ctx Connection context acquired with ::sr_connect call.
 * @param[in] datastore Datastore on which all sysrepo functions within this
 * session will operate. Later on, datastore can be later changed using
 * ::sr_session_switch_ds call. Functionality of some sysrepo calls does not depend on
 * datastore. If your session will contain just calls like these, you can pass
 * any valid value (e.g. SR_RUNNING).
 * @param[in] opts Options overriding default session handling.
 * @param[out] session Session context that can be used for subsequent API
 * calls (automatically allocated, can be released by calling ::sr_session_stop).
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_session_start(sr_conn_ctx_t *conn_ctx, const sr_datastore_t datastore,
        const sr_sess_options_t opts, sr_session_ctx_t **session);

/**
 * @brief Starts a new configuration session on behalf of a different user.
 *
 * This call is intended for northbound access to sysrepo from management
 * applications, that need sysrepo to authorize the operations not only
 * against the user under which the management application is running, but
 * also against another user (e.g. user that connected to the management application).
 *
 * @note Be aware that authorization of specified user may fail with unexpected
 * errors in case that the client library uses its own Sysrepo Engine at the
 * moment and your process in not running under root privileges. To prevent
 * this situation, consider specifying SR_CONN_DAEMON_REQUIRED flag by
 * ::sr_connect call or using ::sr_session_start instead of this function.
 *
 * @see @ref ds_page "Datastores & Sessions" for more information about datastores and sessions.
 *
 * @param[in] conn_ctx Connection context acquired with ::sr_connect call.
 * @param[in] user_name Effective user name used to authorize the access to
 * datastore (in addition to automatically-detected real user name).
 * @param[in] datastore Datastore on which all sysrepo functions within this
 * session will operate. Functionality of some sysrepo calls does not depend on
 * datastore. If your session will contain just calls like these, you can pass
 * any valid value (e.g. SR_RUNNING).
 * @param[in] opts Options overriding default session handling.
 * @param[out] session Session context that can be used for subsequent API calls
 * (automatically allocated, it is supposed to be released by caller using ::sr_session_stop).
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_session_start_user(sr_conn_ctx_t *conn_ctx, const char *user_name, const sr_datastore_t datastore,
        const sr_sess_options_t opts, sr_session_ctx_t **session);

/**
 * @brief Stops current session and releases resources tied to the session.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_session_stop(sr_session_ctx_t *session);

/**
 * @brief Refreshes configuration data cached within the session and starts
 * operating on fresh data loaded from the datastore.
 *
 * Call this function in case that you leave session open for longer time period
 * and you expect that the data in the datastore may have been changed since
 * last data (re)load (which occurs by ::sr_session_start, ::sr_commit and
 * ::sr_discard_changes).
 *
 * @see @ref ds_page "Datastores & Sessions" for information about session data caching.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_session_refresh(sr_session_ctx_t *session);

/**
 * @brief Changes datastore to which the session is tied to. All subsequent
 * calls will be issued on the chosen datastore.
 *
 * @param [in] session
 * @param [in] ds
 * @return Error code (SR_ERR_OK on success)
 */
int sr_session_switch_ds(sr_session_ctx_t *session, sr_datastore_t ds);

/**
 * @brief Alter the session options. E.g.: set/unset SR_SESS_CONFIG_ONLY flag.
 *
 * @param [in] session
 * @param [in] opts - new value for session options
 * @return Error code (SR_ERR_OK on success)
 */
int sr_session_set_options(sr_session_ctx_t *session, const sr_sess_options_t opts);

/**
 * @brief Retrieves detailed information about the error that has occurred
 * during the last operation executed within provided session.
 *
 * If multiple errors has occurred within the last operation, only the first
 * one is returned. This call is sufficient for all data retrieval and data
 * manipulation functions that operate on single-item basis. For operations
 * such as ::sr_validate or ::sr_commit where multiple errors can occur,
 * use ::sr_get_last_errors instead.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[out] error_info Detailed error information. Be aware that
 * returned pointer may change by the next API call executed within the provided
 * session,  so it's not safe to use this function by concurrent access to the
 * same session within multiple threads. Do not free or modify returned values.
 *
 * @return Error code of the last operation executed within provided session.
 */
int sr_get_last_error(sr_session_ctx_t *session, const sr_error_info_t **error_info);

/**
 * @brief Retrieves detailed information about all errors that have occurred
 * during the last operation executed within provided session.
 *
 * Use this call instead of ::sr_get_last_error by operations where multiple
 * errors can occur, such as ::sr_validate or ::sr_commit.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[out] error_info Array of detailed error information. Be aware that
 * returned pointer may change by the next API call executed within the provided
 * session,  so it's not safe to use this function by concurrent access to the
 * same session within multiple threads. Do not free or modify returned values.
 * @param[out] error_cnt Number of errors returned in the error_info array.
 *
 * @return Error code of the last operation executed within provided session.
 */
int sr_get_last_errors(sr_session_ctx_t *session, const sr_error_info_t **error_info, size_t *error_cnt);

/**
 * @brief Sets detailed error information into provided session. Used to notify
 * the client library about errors that occurred in application code.
 *
 * @note Intended for commit verifiers (notification session) - the call has no
 * impact on any other sessions.
 *
 * @param[in] session Session context passed into notification callback.
 * @param[in] message Human-readable error message.
 * @param[in] xpath XPath to the node where the error has occurred. NULL value
 * is also accepted.
 *
 * @return Error code (SR_ERR_OK on success)
 */
int sr_set_error(sr_session_ctx_t *session, const char *message, const char *xpath);


////////////////////////////////////////////////////////////////////////////////
// Data Retrieval API (get / get-config functionality)
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Structure that contains information about one particular schema file installed in sysrepo.
 */
typedef struct sr_sch_revision_s {
    const char *revision;         /**< Revision of the module/submodule. */
    const char *file_path_yang;   /**< Absolute path to file where the module/submodule is stored (YANG format). */
    const char *file_path_yin;    /**< Absolute path to file where the module/submodule is stored (.yin format). */
} sr_sch_revision_t;

/**
 * @brief Structure that contains information about submodules of a module installed in sysrepo.
 */
typedef struct sr_sch_submodule_s {
    const char *submodule_name;    /**< Submodule name. */
    sr_sch_revision_t revision;    /**< Revision of the submodule. */
} sr_sch_submodule_t;

/**
 * @brief Structure that contains information about a module installed in sysrepo.
 */
typedef struct sr_schema_s {
    /**
     * Memory context used internally by Sysrepo for efficient storage
     * and conversion of this structure.
     */
    sr_mem_ctx_t *_sr_mem;

    const char *module_name;         /**< Name of the module. */
    const char *ns;                  /**< Namespace of the module used in @ref xp_page "XPath". */
    const char *prefix;              /**< Prefix of the module. */
    bool implemented;                /**< TRUE if the module is implemented (= explicitly installed),
                                          not just imported. */

    sr_sch_revision_t revision;      /**< Revision the module. */

    sr_sch_submodule_t *submodules;  /**< Array of all installed submodules of the module. */
    size_t submodule_count;          /**< Number of module's submodules. */

    char **enabled_features;         /**< Array of enabled features */
    size_t enabled_feature_cnt;      /**< Number of enabled feature */
} sr_schema_t;

/**
 * @brief Format types of ::sr_get_schema result
 */
typedef enum sr_schema_format_e {
    SR_SCHEMA_YANG,                         /**< YANG format */
    SR_SCHEMA_YIN                           /**< YIN format */
} sr_schema_format_t;

/**
 * @brief Iterator used for accessing data nodes via ::sr_get_items_iter call.
 */
typedef struct sr_val_iter_s sr_val_iter_t;

/**
 * @brief Retrieves list of schemas installed in the sysrepo datastore.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[out] schemas Array of installed schemas information (allocated by
 * the function, it is supposed to be freed by caller using ::sr_free_schemas call).
 * @param[out] schema_cnt Number of schemas returned in the array.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_list_schemas(sr_session_ctx_t *session, sr_schema_t **schemas, size_t *schema_cnt);

/**
 * @brief Retrieves the content of specified schema file. If the module
 * can not be found SR_ERR_NOT_FOUND is returned.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] module_name Name of the requested module.
 * @param[in] revision Requested revision of the module. If NULL
 * is passed, the latest revision will be returned.
 * @param[in] submodule_name Name of the requested submodule. Pass NULL if you are
 * requesting the content of the main module.
 * @param[in] format of the returned schema
 * @param[out] schema_content Content of the specified schema file. Automatically
 * allocated by the function, should be freed by the caller.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_get_schema(sr_session_ctx_t *session, const char *module_name, const char *revision,
         const char *submodule_name, sr_schema_format_t format, char **schema_content);

/**
 * @brief Retrieves a single data element stored under provided XPath. If multiple
 * nodes matches the xpath SR_ERR_INVAL_ARG is returned.
 *
 * If the xpath identifies an empty leaf, a list or a container, the value
 * has no data filled in and its type is set properly (SR_LEAF_EMPTY_T / SR_LIST_T / SR_CONTAINER_T / SR_CONTAINER_PRESENCE_T).
 *
 * @see @ref xp_page "XPath Addressing" documentation, or
 * https://tools.ietf.org/html/draft-ietf-netmod-yang-json#section-6.11
 * for XPath syntax used for identification of yang nodes in sysrepo calls.
 *
 * @see Use ::sr_get_items or ::sr_get_items_iter for retrieving larger chunks
 * of data from the datastore. Since they retrieve the data from datastore in
 * larger chunks, they can work much more efficiently than multiple ::sr_get_item calls.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier of the data element to be retrieved.
 * @param[out] value Structure containing information about requested element
 * (allocated by the function, it is supposed to be freed by the caller using ::sr_free_val).
 *
 * @return Error code (SR_ERR_OK on success)
 */
int sr_get_item(sr_session_ctx_t *session, const char *xpath, sr_val_t **value);

/**
 * @brief Retrieves an array of data elements matching provided XPath
 *
 * All data elements are transferred within one message from the datastore,
 * which is much more efficient that calling multiple ::sr_get_item calls.
 *
 * If the user does not have read permission to access certain nodes, these
 * won't be part of the result. SR_ERR_NOT_FOUND will be returned if there are
 * no nodes matching xpath in the data tree, or the user does not have read permission to access them.
 *
 * If the response contains too many elements time out may be exceeded, SR_ERR_TIME_OUT
 * will be returned, use ::sr_get_items_iter.
 *
 * @see @ref xp_page "XPath Addressing" documentation, or
 * https://tools.ietf.org/html/draft-ietf-netmod-yang-json#section-6.11
 * for XPath syntax used for identification of yang nodes in sysrepo calls.
 *
 * @see ::sr_get_items_iter can be used for the same purpose as ::sr_get_items
 * call if you expect that ::sr_get_items could return too large data sets.
 * Since ::sr_get_items_iter also retrieves the data from datastore in larger chunks,
 * in can still work very efficiently for large datasets.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier of the data element to be retrieved.
 * @param[out] values Array of structures containing information about requested data elements
 * (allocated by the function, it is supposed to be freed by the caller using ::sr_free_values).
 * @param[out] value_cnt Number of returned elements in the values array.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_get_items(sr_session_ctx_t *session, const char *xpath, sr_val_t **values, size_t *value_cnt);

/**
 * @brief Creates an iterator for retrieving of the data elements stored under provided xpath.
 *
 * Requested data elements are transferred from the datastore in larger chunks
 * of pre-defined size, which is much more efficient that calling multiple
 * ::sr_get_item calls, and may be less memory demanding than calling ::sr_get_items
 * on very large datasets.
 *
 * @see @ref xp_page "XPath Addressing" documentation, or
 * https://tools.ietf.org/html/draft-ietf-netmod-yang-json#section-6.11
 * for XPath syntax used for identification of yang nodes in sysrepo calls.
 *
 * @see ::sr_get_item_next for iterating over returned data elements.
 * @note Iterator allows to iterate through the values once. To start iteration
 *  from the beginning new iterator must be created.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier of the data element / subtree to be retrieved.
 * @param[out] iter Iterator context that can be used to retrieve individual data
 * elements via ::sr_get_item_next calls. Allocated by the function, should be
 * freed with ::sr_free_val_iter.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_get_items_iter(sr_session_ctx_t *session, const char *xpath, sr_val_iter_t **iter);

/**
 * @brief Returns the next item from the dataset of provided iterator created
 * by ::sr_get_items_iter call. If there is no item left SR_ERR_NOT_FOUND is returned.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in,out] iter Iterator acquired with ::sr_get_items_iter call.
 * @param[out] value Structure containing information about requested element
 * (allocated by the function, it is supposed to be freed by the caller using ::sr_free_val).
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_get_item_next(sr_session_ctx_t *session, sr_val_iter_t *iter, sr_val_t **value);

/**
 * @brief Flags used to customize the behaviour of ::sr_get_subtree and ::sr_get_subtrees calls.
 */
typedef enum sr_get_subtree_flag_e {
    /**
     * Default get-subtree(s) behaviour.
     * All matched subtrees are sent with all their content in one message.
     */
    SR_GET_SUBTREE_DEFAULT = 0,

    /**
     * The iterative get-subtree(s) behaviour.
     * The matched subtrees are sent in chunks and only as needed while they are iterated
     * through using functions ::sr_node_get_child, ::sr_node_get_next_sibling and
     * ::sr_node_get_parent from "sysrepo/trees.h". This behaviour gives much better
     * performance than the default one if only a small portion of matched subtree(s) is
     * actually iterated through.
     * @note It is considered a programming error to access ::next, ::prev, ::parent,
     * ::first_child and ::last_child data members of sr_node_t on a partially loaded tree.
     */
    SR_GET_SUBTREE_ITERATIVE = 1
} sr_get_subtree_flag_t;

/**
 * @brief Options for get-subtree and get-subtrees operations.
 * It is supposed to be bitwise OR-ed value of any ::sr_get_subtree_flag_t flags.
 */
typedef uint32_t sr_get_subtree_options_t;

/**
 * @brief Retrieves a single subtree whose root node is stored under the provided XPath.
 * If multiple nodes matches the xpath SR_ERR_INVAL_ARG is returned.
 *
 * The functions returns values and all associated information stored under the root node and
 * all its descendants. While the same data can be obtained using ::sr_get_items in combination
 * with the expressive power of XPath addressing, the recursive nature of the output data type
 * also preserves the hierarchical relationships between data elements.
 *
 * Values of internal nodes of the subtree have no data filled in and their type is set properly
 * (SR_LIST_T / SR_CONTAINER_T / SR_CONTAINER_PRESENCE_T), whereas leaf nodes are carrying actual
 * data (apart from SR_LEAF_EMPTY_T).
 *
 * @see @ref xp_page "XPath Addressing" documentation, or
 * https://tools.ietf.org/html/draft-ietf-netmod-yang-json#section-6.11
 * for XPath syntax used for identification of yang nodes in sysrepo calls.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier referencing the root node of the subtree to be retrieved.
 * @param[in] opts Options overriding default behavior of this operation.
 * @param[out] subtree Nested structure storing all data of the requested subtree
 * (allocated by the function, it is supposed to be freed by the caller using ::sr_free_tree).
 *
 * @return Error code (SR_ERR_OK on success)
 */
int sr_get_subtree(sr_session_ctx_t *session, const char *xpath, sr_get_subtree_options_t opts,
        sr_node_t **subtree);

/**
 * @brief Retrieves an array of subtrees whose root nodes match the provided XPath.
 *
 * If the user does not have read permission to access certain nodes, these together with
 * their descendants won't be part of the result. SR_ERR_NOT_FOUND will be returned if there are
 * no nodes matching xpath in the data tree, or the user does not have read permission to access them.
 *
 * Subtrees that match the provided XPath are not merged even if they overlap. This significantly
 * simplifies the implementation and decreases the cost of this operation. The downside is that
 * the user must choose the XPath carefully. If the subtree selection process results in too many
 * node overlaps, the cost of the operation may easily outshine the benefits. As an example,
 * a common XPath expression "//." is normally used to select all nodes in a data tree, but for this
 * operation it would result in an excessive duplication of transfered data elements.
 * Since you get all the descendants of each matched node implicitly, you probably should not need
 * to use XPath wildcards deeper than on the top-level.
 * (i.e. "/." is preferred alternative to "//." for get-subtrees operation).
 *
 * If the response contains too many elements time out may be exceeded, SR_ERR_TIME_OUT
 * will be returned.
 *
 * @see @ref xp_page "XPath Addressing" documentation, or
 * https://tools.ietf.org/html/draft-ietf-netmod-yang-json#section-6.11
 * for XPath syntax used for identification of yang nodes in sysrepo calls.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier referencing root nodes of subtrees to be retrieved.
 * @param[in] opts Options overriding default behavior of this operation.
 * @param[out] subtrees Array of nested structures storing all data of the requested subtrees
 * (allocated by the function, it is supposed to be freed by the caller using ::sr_free_trees).
 * @param[out] subtree_cnt Number of returned trees in the subtrees array.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_get_subtrees(sr_session_ctx_t *session, const char *xpath, sr_get_subtree_options_t opts,
        sr_node_t **subtrees, size_t *subtree_cnt);


////////////////////////////////////////////////////////////////////////////////
// Data Manipulation API (edit-config functionality)
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Flags used to override default behavior of data manipulation calls.
 */
typedef enum sr_edit_flag_e {
    SR_EDIT_DEFAULT = 0,        /**< Default behavior - recursive and non-strict. */
    SR_EDIT_NON_RECURSIVE = 1,  /**< Non-recursive behavior:
                                     by ::sr_set_item, all preceding nodes (parents) of the identified element must exist,
                                     by ::sr_delete_item xpath must not identify an non-empty list or non-empty container. */
    SR_EDIT_STRICT = 2          /**< Strict behavior:
                                     by ::sr_set_item the identified element must not exist (similar to netconf create operation),
                                     by ::sr_delete_item the identified element must exist (similar to netconf delete operation). */
} sr_edit_flag_t;

/**
 * @brief Options overriding default behavior of data manipulation calls,
 * it is supposed to be bitwise OR-ed value of any ::sr_edit_flag_t flags.
 */
typedef uint32_t sr_edit_options_t;

/**
 * @brief Options for specifying move direction of ::sr_move_item call.
 */
typedef enum sr_move_position_e {
    SR_MOVE_BEFORE = 0,    /**< Move the specified item before the selected sibling. */
    SR_MOVE_AFTER = 1,     /**< Move the specified item after the selected. */
    SR_MOVE_FIRST = 2,     /**< Move the specified item to the position of the first child. */
    SR_MOVE_LAST = 3,      /**< Move the specified item to the position of the last child. */
} sr_move_position_t;

/**
 * @brief Sets the value of the leaf, leaf-list, list or presence container.
 *
 * With default options it recursively creates all missing nodes (containers and
 * lists including their key leaves) in the xpath to the specified node (can be
 * turned off with SR_EDIT_NON_RECURSIVE option). If SR_EDIT_STRICT flag is set,
 * the node must not exist (otherwise an error is returned).
 *
 * To create a list use xpath with key values included and pass NULL as value argument.
 *
 * Setting of a leaf-list value appends the value at the end of the leaf-list.
 * A value of leaf-list can be specified either by predicate in xpath or by value argument.
 * If both are present, value argument is ignored and xpath predicate is used.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier of the data element to be set.
 * @param[in] value Value to be set on specified xpath. xpath member of the
 * ::sr_val_t structure can be NULL. Value will be copied - can be allocated on stack.
 * @param[in] opts Options overriding default behavior of this call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_set_item(sr_session_ctx_t *session, const char *xpath, const sr_val_t *value, const sr_edit_options_t opts);

/**
 * @brief Deletes the nodes under the specified xpath.
 *
 * To delete non-empty lists or containers SR_EDIT_NON_RECURSIVE flag must not be set.
 * If SR_EDIT_STRICT flag is set the specified node must must exist in the datastore.
 * If the xpath includes the list keys, the specified list instance is deleted.
 * If the xpath to list does not include keys, all instances of the list are deleted.
 * SR_ERR_UNAUTHORIZED will be returned if the user does not have write permission to any affected node.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier of the data element to be deleted.
 * @param[in] opts Options overriding default behavior of this call.
 *
 * @return Error code (SR_ERR_OK on success).
 **/
int sr_delete_item(sr_session_ctx_t *session, const char *xpath, const sr_edit_options_t opts);

/**
 * @brief Move the instance of an user-ordered list or leaf-list to the specified position.
 *
 * Item can be move to the first or last position or positioned relatively to its sibling.
 * @note To determine current order, you can issue a ::sr_get_items call
 * (without specifying keys of the list in question).
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier of the data element to be moved.
 * @param[in] position Requested move direction.
 * @param[in] relative_item xpath Identifier of the data element that is used
 * to determine relative position, used only if position argument is SR_MOVE_BEFORE or SR_MOVE_AFTER.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_move_item(sr_session_ctx_t *session, const char *xpath, const sr_move_position_t position, const char *relative_item);

/**
 * @brief Perform the validation of changes made in current session, but do not
 * commit nor discard them.
 *
 * Provides only YANG validation, commit verify subscribers won't be notified in this case.
 *
 * @see Use ::sr_get_last_errors to retrieve error information if the validation
 * returned with an error.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_validate(sr_session_ctx_t *session);

/**
 * @brief Apply changes made in current session.
 *
 * @note Note that in case that you are committing to the running datstore, you also
 * need to copy the config to startup to make changes permanent after restart.
 *
 * @see Use ::sr_get_last_errors to retrieve error information if the commit
 * operation returned with an error.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_commit(sr_session_ctx_t *session);

/**
 * @brief Discard non-committed changes made in current session.
 *
 * @note Since the function effectively clears all the cached data within the session,
 * the next operation will operate on fresh data loaded from the datastore
 * (i.e. no need to call ::sr_session_refresh afterwards).
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_discard_changes(sr_session_ctx_t *session);

/**
 * @brief Replaces an entire configuration datastore  with the contents of
 * another complete configuration datastore. If the module is specified, limits
 * the copy operation only to one specified module. If it's not specified,
 * the operation is performed on all modules that are currently active in the
 * source datastore.
 *
 * If the target datastore exists, it is overwritten. Otherwise, a new one is created.
 *
 * @note ::sr_session_refresh is needed to see the result of a copy-config operation
 * in a session apart from the case when SR_DS_CANDIDATE is the destination datastore.
 * Since the candidate is not shared among sessions, data trees are copied only to the
 * canidate in the session issuing the copy-config operation.
 *
 * @note Operation may fail, if it tries to copy a not enabled configuration to the
 * running datastore.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] module_name If specified, only limits the copy operation only to
 * one specified module.
 * @param[in] src_datastore Source datastore.
 * @param[in] dst_datastore Destination datastore.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_copy_config(sr_session_ctx_t *session, const char *module_name,
        sr_datastore_t src_datastore, sr_datastore_t dst_datastore);


////////////////////////////////////////////////////////////////////////////////
// Locking API
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Locks the datastore which the session is tied to. If there is
 * a module locked by the other session SR_ERR_LOCKED is returned.
 * Operation fails if there is a modified data tree in session.
 *
 * All data models within the datastore will be locked for writing until
 * ::sr_unlock_datastore is called or until the session is stopped or terminated
 * for any reason.
 *
 * The lock operation will not be allowed if the user does not have sufficient
 * permissions for writing into each of the data models in the datastore.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_lock_datastore(sr_session_ctx_t *session);

/**
 * @brief Unlocks the datastore which the session is tied to.
 *
 * All data models within the datastore will be unlocked if they were locked
 * by this session.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_unlock_datastore(sr_session_ctx_t *session);

/**
 * @brief Locks specified data module within the datastore which the session
 * is tied to. Operation fails if the data tree has been modified.
 *
 * Specified data module will be locked for writing in the datastore until
 * ::sr_unlock_module is called or until the session is stopped or terminated
 * for any reason.
 *
 * The lock operation will not be allowed if the user does not have sufficient
 * permissions for writing into the specified data module.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] module_name Name of the module to be locked.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_lock_module(sr_session_ctx_t *session, const char *module_name);

/**
 * @brief Unlocks specified data module within the datastore which the session
 * is tied to.
 *
 * Specified data module will be unlocked if was locked in the datastore
 * by this session.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] module_name Name of the module to be unlocked.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_unlock_module(sr_session_ctx_t *session, const char *module_name);


////////////////////////////////////////////////////////////////////////////////
// Change Notifications API
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Flags used to override default handling of subscriptions.
 */
typedef enum sr_subscr_flag_e {
    SR_SUBSCR_DEFAULT = 0,    /**< Default behavior of the subscription. In case of ::sr_module_change_subscribe and
                                   ::sr_subtree_change_subscribe calls it means that:
                                   - the subscriber is the "owner" of the subscribed data tree and and the data tree will be
                                   enabled in the running datastore while this subcription is alive (can be changed using ::SR_SUBSCR_PASSIVE flag),
                                   - configuration data of the subscribed module or subtree is copied from startup to running datastore,
                                   - the callback will be called twice, once with ::SR_EV_VERIFY event and once with ::SR_EV_APPLY / ::SR_EV_ABORT
                                   event passed in (can be changed with ::SR_SUBSCR_APPLY_ONLY flag). */
    SR_SUBSCR_CTX_REUSE = 1,  /**< This option enables the application to re-use an already existing subscription context
                                   previously returned from any sr_*_subscribe call instead of requesting the creation of a new one.
                                   In that case a single ::sr_unsubscribe call unsubscribes from all subscriptions filed within the context. */
    SR_SUBSCR_PASSIVE = 2,    /**< The subscriber is not the "owner" of the subscribed data tree, just a passive watcher for changes.
                                   When this option is passed in to ::sr_module_change_subscribe or ::sr_subtree_change_subscribe,
                                   the subscription will have no effect on the presence of the subtree in the running datastore. */
    SR_SUBSCR_APPLY_ONLY = 4, /**< The subscriber does not support verification of the changes and wants to be notified only
                                   after the changes has been applied in the datastore, without the possibility to deny them
                                   (it will receive only ::SR_EV_APPLY events). */
    SR_SUBSCR_EV_ENABLED = 8, /**< The subscriber wants ::SR_EV_ENABLED notifications to be sent to them. */
    SR_SUBSCR_NO_ABORT_FOR_REFUSED_CFG = 16, /**< The subscriber will not receive ::SR_EV_ABORT if he returns an error in verify phase
                                              * (if the commit is refused by other verifier ::SR_EV_ABORT will be delivered). */
} sr_subscr_flag_t;

/**
 * @brief Options overriding default behavior of subscriptions,
 * it is supposed to be a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 */
typedef uint32_t sr_subscr_options_t;

/**
 * @brief Type of the notification event that has occurred (passed to notification callbacks).
 *
 * @note Each change is normally notified twice: first as ::SR_EV_VERIFY event and then as ::SR_EV_APPLY or ::SR_EV_ABORT
 * event. If the subscriber does not support verification, it can subscribe only to ::SR_EV_APPLY event by providing
 * ::SR_SUBSCR_APPLY_ONLY subscription flag.
 */
typedef enum sr_notif_event_e {
    SR_EV_VERIFY,  /**< Occurs just before the changes are committed to the datastore,
                        the subscriber is supposed to verify that the changes are valid and can be applied
                        and prepare all resources required for the changes. The subscriber can still deny the changes
                        in this phase by returning an error from the callback. */
    SR_EV_APPLY,   /**< Occurs just after the changes have been successfully committed to the datastore,
                        the subscriber is supposed to apply the changes now, but it cannot deny the changes in this
                        phase anymore (any returned errors are just logged and ignored). */
    SR_EV_ABORT,   /**< Occurs in case that the commit transaction has failed (possibly because one of the verifiers
                        has denied the change / returned an error). The subscriber is supposed to return the managed
                        application to the state before the commit. Any returned errors are just logged and ignored. */
    SR_EV_ENABLED, /**< Occurs just after the subscription. Subscriber gets notified about configuration that was copied
                        from startup to running. This allows to reuse the callback for applying changes made in running to reflect the changes
                        when the configuration is copied from startup to running during subscription process */
} sr_notif_event_t;

/**
 * @brief Type of the operation made on an item, used by changeset retrieval in ::sr_get_change_next.
 */
typedef enum sr_change_oper_e {
    SR_OP_CREATED,   /**< The item has been created by the change. */
    SR_OP_MODIFIED,  /**< The value of the item has been modified by the change. */
    SR_OP_DELETED,   /**< The item has been deleted by the change. */
    SR_OP_MOVED,     /**< The item has been moved in the subtree by the change (applicable for leaf-lists and user-ordered lists). */
} sr_change_oper_t;

/**
 * @brief State of a module as returned by the ::sr_module_install_cb callback.
 */
typedef enum sr_module_state_e {
    SR_MS_UNINSTALLED,  /**< The module is not installed in the sysrepo repository. */
    SR_MS_IMPORTED,     /**< The module has been implicitly installed into the sysrepo repository
                             as it is imported by another implemented/imported module. */
    SR_MS_IMPLEMENTED   /**< The module has been explicitly installed into the sysrepo repository by the user. */
} sr_module_state_t;

/**
 * @brief Sysrepo subscription context returned from sr_*_subscribe calls,
 * it is supposed to be released by the caller using ::sr_unsubscribe call.
 */
typedef struct sr_subscription_ctx_s sr_subscription_ctx_t;

/**
 * @brief Iterator used for retrieval of a changeset using ::sr_get_changes_iter call.
 */
typedef struct sr_change_iter_s sr_change_iter_t;

/**
 * @brief Callback to be called by the event of changing any running datastore
 * content within the specified module. Subscribe to it by ::sr_module_change_subscribe call.
 *
 * @param[in] session Automatically-created session that can be used for obtaining changed data
 * (e.g. by ::sr_get_changes_iter call ot ::sr_get_item -like calls). Do not stop this session.
 * @param[in] module_name Name of the module where the change has occurred.
 * @param[in] event Type of the notification event that has occurred.
 * @param[in] private_ctx Private context opaque to sysrepo, as passed to
 * ::sr_module_change_subscribe call.
 */
typedef int (*sr_module_change_cb)(sr_session_ctx_t *session, const char *module_name,
        sr_notif_event_t event, void *private_ctx);

/**
 * @brief Callback to be called by the event of changing any running datastore
 * content within the specified subtree. Subscribe to it by ::sr_subtree_change_subscribe call.
 *
 * @param[in] session Automatically-created session that can be used for obtaining changed data
 * (e.g. by ::sr_get_changes_iter call or ::sr_get_item -like calls). Do not stop this session.
 * @param[in] xpath XPath of the subtree where the change has occurred (as
 * provided to ::sr_subtree_change_subscribe call).
 * @param[in] event Type of the notification event that has occurred.
 * @param[in] private_ctx Private context opaque to sysrepo, as passed to
 * ::sr_subtree_change_subscribe call.
 */
typedef int (*sr_subtree_change_cb)(sr_session_ctx_t *session, const char *xpath,
        sr_notif_event_t event, void *private_ctx);

/**
 * @brief Callback to be called by the event of installation / uninstallation
 * of a new module into sysrepo. Subscribe to it by ::sr_module_install_subscribe call.
 *
 * @param[in] module_name Name of the newly installed / uinstalled module.
 * @param[in] revision Revision of the newly installed module (if specified
 * within the YANG model).
 * @param[in] state The new state of the module (uninstalled vs. imported vs. implemented).
 * @param[in] private_ctx Private context opaque to sysrepo, as passed to
 * ::sr_module_install_subscribe call.
 */
typedef void (*sr_module_install_cb)(const char *module_name, const char *revision, sr_module_state_t state,
        void *private_ctx);

/**
 * @brief Callback to be called by the event of enabling / disabling of
 * a YANG feature within a module. Subscribe to it by ::sr_feature_enable_subscribe call.
 *
 * @param[in] module_name Name of the module where the feature has been enabled / disabled.
 * @param[in] feature_name Name of the feature that has been enabled / disabled.
 * @param[in] enabled TRUE if the feature has been enabled, FALSE if disabled.
 * @param[in] private_ctx Private context opaque to sysrepo, as passed to
 * ::sr_feature_enable_subscribe call.
 */
typedef void (*sr_feature_enable_cb)(const char *module_name, const char *feature_name, bool enabled, void *private_ctx);

/**
 * @brief Subscribes for notifications about the changes made within specified
 * module in running datastore.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] module_name Name of the module of interest for change notifications.
 * @param[in] callback Callback to be called when the change in the datastore occurs.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] priority Specifies the order in which the callbacks will be called (callbacks with higher
 * priority will be called sooner, callbacks with the priority of 0 will be called at the end).
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_module_change_subscribe(sr_session_ctx_t *session, const char *module_name, sr_module_change_cb callback,
        void *private_ctx, uint32_t priority, sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);

/**
 * @brief Subscribes for notifications about the changes made within specified
 * subtree in running datastore.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath @ref xp_page "XPath" identifier of the subtree of the interest for change notifications.
 * The XPath cannot identify any specific list instance - keys of the lists should be omitted.
 * @param[in] callback Callback to be called when the change in the datastore occurs.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] priority Specifies the order in which the callbacks will be called (callbacks with higher
 * priority will be called sooner, callbacks with the priority of 0 will be called at the end).
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_subtree_change_subscribe(sr_session_ctx_t *session, const char *xpath, sr_subtree_change_cb callback,
        void *private_ctx, uint32_t priority, sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);

/**
 * @brief Subscribes for notifications about installation / uninstallation
 * of a new module into sysrepo.
 *
 * Mainly intended for northbound management applications that need to be
 * always aware of all active modules installed in sysrepo.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] callback Callback to be called when the event occurs.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_module_install_subscribe(sr_session_ctx_t *session, sr_module_install_cb callback, void *private_ctx,
        sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);

/**
 * @brief Subscribes for notifications about enabling / disabling of
 * a YANG feature within a module.
 *
 * Mainly intended for northbound management applications that need to be
 * always aware of all active features within the modules installed in sysrepo.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] callback Callback to be called when the event occurs.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_feature_enable_subscribe(sr_session_ctx_t *session, sr_feature_enable_cb callback, void *private_ctx,
        sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);

/**
 * @brief Unsubscribes from a subscription acquired by any of sr_*_subscribe
 * calls and releases all subscription-related data.
 *
 * @note In case that the same subscription context was used to subscribe for
 * multiple subscriptions, unsubscribes from all of them.
 *
 * @param[in] session Session context acquired with ::sr_session_start call. Does not
 * need to be the same as used for subscribing. NULL can be passed too, in that case
 * a temporary session used for unsubscribe will be automatically created by sysrepo.
 * @param[in] subscription Subscription context acquired by any of sr_*_subscribe calls.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_unsubscribe(sr_session_ctx_t *session, sr_subscription_ctx_t *subscription);

/**
 * @brief Creates an iterator for retrieving of the changeset (list of newly
 * added / removed / modified nodes) in notification callbacks.
 *
 * @see ::sr_get_change_next for iterating over the changeset using this iterator.
 *
 * @param[in] session Session context as passed to notication the callbacks (e.g.
 * ::sr_module_change_cb or ::sr_subtree_change_cb). Will not work with any other sessions.
 * @param[in] xpath @ref xp_page "XPath" identifier of the subtree from which the changeset
 * should be obtained. Only XPaths that would be accepted by ::sr_subtree_change_subscribe are allowed.
 * @param[out] iter Iterator context that can be used to retrieve individual changes using
 * ::sr_get_change_next calls. Allocated by the function, should be freed with ::sr_free_change_iter.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_get_changes_iter(sr_session_ctx_t *session, const char *xpath, sr_change_iter_t **iter);

/**
 * @brief Returns the next change from the changeset of provided iterator created
 * by ::sr_get_changes_iter call. If there is no item left, SR_ERR_NOT_FOUND is returned.
 *
 * @param[in] session Session context as passed to notication the callbacks (e.g.
 * ::sr_module_change_cb or ::sr_subtree_change_cb). Will not work with any other sessions.
 * @param[in,out] iter Iterator acquired with ::sr_get_changes_iter call.
 * @param[out] operation Type of the operation made on the returned item.
 * @param[out] old_value Old value of the item (the value before the change).
 * NULL in case that the item has been just created (operation == SR_OP_CREATED).
 * @param[out] new_value New (modified) value of the the item. NULL in case that
 * the item has been just deleted (operation == SR_OP_DELETED).
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_get_change_next(sr_session_ctx_t *session, sr_change_iter_t *iter, sr_change_oper_t *operation,
        sr_val_t **old_value, sr_val_t **new_value);


////////////////////////////////////////////////////////////////////////////////
// RPC (Remote Procedure Calls) API
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Callback to be called by the delivery of RPC specified by xpath.
 * Subscribe to it by ::sr_rpc_subscribe call.
 *
 * @param[in] xpath XPath identifying the RPC.
 * @param[in] input Array of input parameters.
 * @param[in] input_cnt Number of input parameters.
 * @param[out] output Array of output parameters. Should be allocated on heap,
 * will be freed by sysrepo after sending of the RPC response.
 * @param[out] output_cnt Number of output parameters.
 * @param[in] private_ctx Private context opaque to sysrepo, as passed to ::sr_rpc_subscribe call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
typedef int (*sr_rpc_cb)(const char *xpath, const sr_val_t *input, const size_t input_cnt,
        sr_val_t **output, size_t *output_cnt, void *private_ctx);

/**
 * @brief Callback to be called by the delivery of RPC specified by xpath.
 * This RPC callback variant operates with sysrepo trees rather than with sysrepo values,
 * use it with ::sr_rpc_subscribe_tree and ::sr_rpc_send_tree.
 *
 * @param[in] xpath XPath identifying the RPC.
 * @param[in] input Array of input parameters (represented as trees).
 * @param[in] input_cnt Number of input parameters.
 * @param[out] output Array of output parameters (represented as trees). Should be allocated on heap,
 * will be freed by sysrepo after sending of the RPC response.
 * @param[out] output_cnt Number of output parameters.
 * @param[in] private_ctx Private context opaque to sysrepo, as passed to ::sr_rpc_subscribe_tree call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
typedef int (*sr_rpc_tree_cb)(const char *xpath, const sr_node_t *input, const size_t input_cnt,
        sr_node_t **output, size_t *output_cnt, void *private_ctx);

/**
 * @brief Subscribes for delivery of RPC specified by xpath.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the RPC.
 * @param[in] callback Callback to be called when the RPC is called.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_rpc_subscribe(sr_session_ctx_t *session, const char *xpath, sr_rpc_cb callback, void *private_ctx,
        sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);

/**
 * @brief Subscribes for delivery of RPC specified by xpath. Unlike ::sr_rpc_subscribe, this
 * function expects callback of type ::sr_rpc_tree_cb, therefore use this version if you prefer
 * to manipulate with RPC input and output data organized in a list of trees rather than as a flat
 * enumeration of all values.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the RPC.
 * @param[in] callback Callback to be called when the RPC is called.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_rpc_subscribe_tree(sr_session_ctx_t *session, const char *xpath, sr_rpc_tree_cb callback,
        void *private_ctx, sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);

/**
 * @brief Sends a RPC specified by xpath and waits for the result.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the RPC.
 * @param[in] input Array of input parameters (array of all nodes that hold some
 * data in RPC input subtree - same as ::sr_get_items would return).
 * @param[in] input_cnt Number of input parameters.
 * @param[out] output Array of output parameters (all nodes that hold some data
 * in RPC output subtree). Will be allocated by sysrepo and should be freed by
 * caller using ::sr_free_values.
 * @param[out] output_cnt Number of output parameters.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_rpc_send(sr_session_ctx_t *session, const char *xpath,
        const sr_val_t *input,  const size_t input_cnt, sr_val_t **output, size_t *output_cnt);

/**
 * @brief Sends a RPC specified by xpath and waits for the result. Input and output data
 * are represented as arrays of subtrees reflecting the scheme of RPC arguments.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the RPC.
 * @param[in] input Array of input parameters (organized in trees).
 * @param[in] input_cnt Number of input parameters.
 * @param[out] output Array of output parameters (organized in trees).
 * Will be allocated by sysrepo and should be freed by caller using ::sr_free_trees.
 * @param[out] output_cnt Number of output parameters.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_rpc_send_tree(sr_session_ctx_t *session, const char *xpath,
        const sr_node_t *input,  const size_t input_cnt, sr_node_t **output, size_t *output_cnt);


////////////////////////////////////////////////////////////////////////////////
// Event Notifications API
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Callback to be called by the delivery of event notification specified by xpath.
 * Subscribe to it by ::sr_event_notif_subscribe call.
 *
 * @param[in] xpath XPath identifying the event notification.
 * @param[in] values Array of all nodes that hold some data in event notification subtree.
 * @param[in] values_cnt Number of items inside the values array.
 * @param[in] private_ctx Private context opaque to sysrepo,
 * as passed to ::sr_event_notif_subscribe call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
typedef void (*sr_event_notif_cb)(const char *xpath, const sr_val_t *values, const size_t values_cnt,
        void *private_ctx);

/**
 * @brief Callback to be called by the delivery of event notification specified by xpath.
 * This callback variant operates with sysrepo trees rather than with sysrepo values,
 * use it with ::sr_event_notif_subscribe_tree and ::sr_event_notif_send_tree.
 *
 * @param[in] xpath XPath identifying the event notification.
 * @param[in] trees Array of subtrees carrying event notification data.
 * @param[in] tree_cnt Number of subtrees with data.
 * @param[in] private_ctx Private context opaque to sysrepo, as passed to ::sr_event_notif_subscribe_tree call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
typedef void (*sr_event_notif_tree_cb)(const char *xpath, const sr_node_t *trees, const size_t tree_cnt,
        void *private_ctx);

/**
 * @brief Subscribes for delivery of an event notification specified by xpath.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the event notification.
 * @param[in] callback Callback to be called when the event notification is send.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_event_notif_subscribe(sr_session_ctx_t *session, const char *xpath,
        sr_event_notif_cb callback, void *private_ctx, sr_subscr_options_t opts,
        sr_subscription_ctx_t **subscription);

/**
 * @brief Subscribes for delivery of event notification specified by xpath.
 * Unlike ::sr_event_notif_subscribe, this function expects callback of type ::sr_event_notif_tree_cb,
 * therefore use this version if you prefer to manipulate with event notification data organized
 * in a list of trees rather than as a flat enumeration of all values.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the event notification.
 * @param[in] callback Callback to be called when the event notification is called.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_event_notif_subscribe_tree(sr_session_ctx_t *session, const char *xpath,
        sr_event_notif_tree_cb callback, void *private_ctx, sr_subscr_options_t opts,
        sr_subscription_ctx_t **subscription);

/**
 * @brief Sends an event notification specified by xpath and waits for the result.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the event notification.
 * @param[in] values Array of all nodes that hold some data in event notification subtree
 * (same as ::sr_get_items would return).
 * @param[in] values_cnt Number of items inside the values array.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_event_notif_send(sr_session_ctx_t *session, const char *xpath, const sr_val_t *values,
        const size_t values_cnt);

/**
 * @brief Sends an event notification specified by xpath and waits for the result.
 * The notification data are represented as arrays of subtrees reflecting the scheme
 * of the event notification.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the RPC.
 * @param[in] tree Array of subtrees carrying event notification data.
 * @param[in] tree_cnt Number of subtrees with data.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_event_notif_send_tree(sr_session_ctx_t *session, const char *xpath,
        const sr_node_t *trees,  const size_t tree_cnt);

////////////////////////////////////////////////////////////////////////////////
// Action API
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Callback to be called by the delivery of Action (operation connected to a specific data node)
 * specified by xpath. Subscribe to it by ::sr_action_subscribe call.
 * @see This type is an alias for @ref sr_rpc_cb "the RPC callback type"
 */
typedef sr_rpc_cb sr_action_cb;

/**
 * @brief Callback to be called by the delivery of Action (operation connected to a specific data node)
 * specified by xpath.
 * This callback variant operates with sysrepo trees rather than with sysrepo values,
 * use it with ::sr_action_subscribe_tree and ::sr_action_send_tree.
 * @see This type is an alias for tree variant of @ref sr_rpc_tree_cb "the RPC callback type"
 */
typedef sr_rpc_tree_cb sr_action_tree_cb;

/**
 * @brief Subscribes for delivery of Action specified by xpath.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the Action.
 * @param[in] callback Callback to be called when the Action is called.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_action_subscribe(sr_session_ctx_t *session, const char *xpath, sr_action_cb callback, void *private_ctx,
        sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);

/**
 * @brief Subscribes for delivery of Action specified by xpath. Unlike ::sr_action_subscribe, this
 * function expects callback of type ::sr_action_tree_cb, therefore use this version if you prefer
 * to manipulate with Action input and output data organized in a list of trees rather than as a flat
 * enumeration of all values.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the Action.
 * @param[in] callback Callback to be called when the Action is called.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 * @note An existing context may be passed in case that SR_SUBSCR_CTX_REUSE option is specified.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_action_subscribe_tree(sr_session_ctx_t *session, const char *xpath, sr_action_tree_cb callback,
        void *private_ctx, sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);

/**
 * @brief Executes an action specified by xpath and waits for the result.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the Action.
 * @param[in] input Array of input parameters (array of all nodes that hold some
 * data in Action input subtree - same as ::sr_get_items would return).
 * @param[in] input_cnt Number of input parameters.
 * @param[out] output Array of output parameters (all nodes that hold some data
 * in Action output subtree). Will be allocated by sysrepo and should be freed by
 * caller using ::sr_free_values.
 * @param[out] output_cnt Number of output parameters.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_action_send(sr_session_ctx_t *session, const char *xpath,
        const sr_val_t *input,  const size_t input_cnt, sr_val_t **output, size_t *output_cnt);

/**
 * @brief Executes an action specified by xpath and waits for the result. Input and output data
 * are represented as arrays of subtrees reflecting the scheme of Action arguments.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the Action.
 * @param[in] input Array of input parameters (organized in trees).
 * @param[in] input_cnt Number of input parameters.
 * @param[out] output Array of output parameters (organized in trees).
 * Will be allocated by sysrepo and should be freed by caller using ::sr_free_trees.
 * @param[out] output_cnt Number of output parameters.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_action_send_tree(sr_session_ctx_t *session, const char *xpath,
        const sr_node_t *input,  const size_t input_cnt, sr_node_t **output, size_t *output_cnt);

////////////////////////////////////////////////////////////////////////////////
// Operational Data API
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Callback to be called when operational data at the selected level is requested.
 * Subscribe to it by ::sr_dp_get_items_subscribe call.
 *
 * Callback handler is supposed to provide data of all nodes at the level selected by the xpath argument:
 *
 * - If the xpath identifies a container, the provider is supposed to return all leaves and leaf-lists values within it.
 * Nested lists and containers should not be provided - sysrepo will ask for them in subsequent calls.
 * - If the xpath identifies a list, the provider is supposed to return all leaves and leaf-lists values within all
 * instances of the list. Nested lists and containers should not be provided - sysrepo will ask for them in subsequent calls.
 * - If the xpath identifies a leaf-list, the provider is supposed to return all leaf-list values.
 * - If the xpath identifies a leaf, the provider is supposed to return just the leaf in question.
 *
 * The xpath argument passed to callback can be only the xpath that was used for the subscription, or xpath of
 * any nested lists or containers.
 *
 * @param[in] xpath XPath identifying the level under which the nodes are requested.
 * @param[out] values Array of values at the selected level (allocated by the provider).
 * @param[out] values_cnt Number of values returned.
 * @param[in] private_ctx Private context opaque to sysrepo, as passed to ::sr_dp_get_items_subscribe call.
 *
 * @return Error code (SR_ERR_OK on success).
 */
typedef int (*sr_dp_get_items_cb)(const char *xpath, sr_val_t **values, size_t *values_cnt, void *private_ctx);

/**
 * @brief Registers for providing of operational data under given xpath.
 *
 * @note The XPath must be generic - must not include any list key values.
 * @note This API works only for operational data (subtrees marked in YANG as "config false").
 * Subscribing as a data provider for configuration data does not have any effect.
 *
 * @param[in] session Session context acquired with ::sr_session_start call.
 * @param[in] xpath XPath identifying the subtree under which the provider is able to provide
 * operational data.
 * @param[in] callback Callback to be called when the operational data nder given xpat is needed.
 * @param[in] private_ctx Private context passed to the callback function, opaque to sysrepo.
 * @param[in] opts Options overriding default behavior of the subscription, it is supposed to be
 * a bitwise OR-ed value of any ::sr_subscr_flag_t flags.
 * @param[in,out] subscription Subscription context that is supposed to be released by ::sr_unsubscribe.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_dp_get_items_subscribe(sr_session_ctx_t *session, const char *xpath, sr_dp_get_items_cb callback, void *private_ctx,
        sr_subscr_options_t opts, sr_subscription_ctx_t **subscription);


////////////////////////////////////////////////////////////////////////////////
// Application-local File Descriptor Watcher API
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Event that has occurred on a monitored file descriptor.
 */
typedef enum sr_fd_event_e {
    SR_FD_INPUT_READY = 1,   /**< File descriptor is now readable without blocking. */
    SR_FD_OUTPUT_READY = 2,  /**< File descriptor is now writable without blocking. */
} sr_fd_event_t;

/**
 * @brief Action that needs to be taken on a file descriptor.
 */
typedef enum sr_fd_action_s {
    SR_FD_START_WATCHING,  /**< Start watching for the specified event on the file descriptor. */
    SR_FD_STOP_WATCHING,   /**< Stop watching for the specified event on the file descriptor. */
} sr_fd_action_t;

/**
 * @brief Structure representing a change in the set of file descriptors monitored by the application.
 */
typedef struct sr_fd_change_s {
    int fd;                 /**< File descriptor whose monitored state should be changed. */
    int events;             /**< Monitoring events tied to the change (or-ed value of ::sr_fd_event_t). */
    sr_fd_action_t action;  /**< Action that is supposed to be performed by application-local file descriptor watcher. */
} sr_fd_change_t;

/**
 * @brief Initializes application-local file descriptor watcher.
 *
 * This can be used in those applications that subscribe for changes or providing data in sysrepo, which have their
 * own event loop that is capable of monitoring of the events on provided file descriptors. In case that the
 * application-local file descriptor watcher is initialized, sysrepo client library won't use a separate thread
 * for the delivery of the notifications and for calling the callbacks - they will be called from the main thread of the
 * application's event loop (inside of ::sr_fd_event_process calls).
 *
 * @note Calling this function has global consequences on the behavior of the sysrepo client library within the process
 * that called it. It is supposed to be called as the first sysrepo API call within the application.
 *
 * @param[out] fd Initial file descriptor that is supposed to be monitored for readable events by the application.
 * Once there is an event detected on this file descriptor, the application is supposed to call ::sr_fd_event_process.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_fd_watcher_init(int *fd);

/**
 * @brief Cleans-up the application-local file descriptor watcher previously initiated by ::sr_fd_watcher_init.
 * It is supposed to be called as the last sysrepo API within the application.
 */
void sr_fd_watcher_cleanup();

/**
 * @brief Processes an event that has occurred on one of the file descriptors that the application is monitoring for
 * sysrepo client library purposes. As a result of this event, another file descriptors may need to be started or
 * stopped monitoring by the application. These are returned as ::fd_change_set array.
 *
 * @param[in] fd File descriptor where an event occurred.
 * @param[in] event Type of the event that occurred on the given file descriptor.
 * @param[out] fd_change_set Array of file descriptors that need to be started or stopped monitoring for specified event
 * by the application. The application is supposed to free this array after it processes it.
 * @param[out] fd_change_set_cnt Count of the items in the ::fd_change_set array.
 *
 * @return Error code (SR_ERR_OK on success).
 */
int sr_fd_event_process(int fd, sr_fd_event_t event, sr_fd_change_t **fd_change_set, size_t *fd_change_set_cnt);


////////////////////////////////////////////////////////////////////////////////
// Cleanup Routines
////////////////////////////////////////////////////////////////////////////////

/**
 * @brief Frees ::sr_val_t structure and all memory allocated within it.
 *
 * @param[in] value Value to be freed.
 */
void sr_free_val(sr_val_t *value);

/**
 * @brief Frees array of ::sr_val_t structures (and all memory allocated
 * within of each array element).
 *
 * @param[in] values Array of values to be freed.
 * @param[in] count Number of elements stored in the array.
 */
void sr_free_values(sr_val_t *values, size_t count);

/**
 * @brief Frees ::sr_val_iter_t iterator and all memory allocated within it.
 *
 * @param[in] iter Iterator to be freed.
 */
void sr_free_val_iter(sr_val_iter_t *iter);

/**
 * @brief Frees ::sr_change_iter_t iterator and all memory allocated within it.
 *
 * @param[in] iter Iterator to be freed.
 */
void sr_free_change_iter(sr_change_iter_t *iter);

/**
 * @brief Frees array of ::sr_schema_t structures (and all memory allocated
 * within of each array element).
 *
 * @param [in] schemas Array of schemas to be freed.
 * @param [in] count Number of elements stored in the array.
 */
void sr_free_schemas(sr_schema_t *schemas, size_t count);

/**
 * @brief Frees sysrepo tree data.
 *
 * @param[in] tree Tree data to be freed.
 */
void sr_free_tree(sr_node_t *tree);

/**
 * @brief Frees array of sysrepo trees. For each tree, the ::sr_free_tree is called too.
 *
 * @param[in] trees
 * @param[in] count length of array
 */
void sr_free_trees(sr_node_t *trees, size_t count);

/**@} cl */

#endif /* SYSREPO_H_ */