Skip to content

Latest commit

 

History

History
49 lines (34 loc) · 1.51 KB

README.md

File metadata and controls

49 lines (34 loc) · 1.51 KB

buffer-processor-ts

Build and tests with Node.js

This repository contains a processor to buffer data for the RDF Connect framework. At a certain interval, the processor will pipe through a given amount of data from the incoming stream to the outgoing stream.

Configuration

The processor can be configured using the following parameters:

  • incoming: The incoming stream to buffer.
  • outgoing: The outgoing stream to pipe the buffered data to.
  • interval: The interval at which the processor should pipe through data from the incoming stream. The default value is 1000 milliseconds.
  • amount: The amount of data that should be piped through from the incoming stream at each interval. Use 0 to pipe through all available data. The default value is 0.
  • minAmount: The minimum amount of data that should be piped through from the incoming stream at each interval. The default value is 1.

Installation

npm install
npm run build

Or install from NPM:

npm install @rdfc/buffer-processor-ts

Example

An example configuration of the processor can be found in the example directory.

You can run this example by executing the following command:

npx js-runner example/pipeline.ttl

To enable all debug logs, add DEBUG=* before the command:

DEBUG=* npx js-runner example/pipeline.ttl