This is a Yocto build layer(version:dunfell) that provides support for the RZ/G1 Group of 32bit Arm-based MPUs; RZ/G2, RZ/G3 Groups of 64bit Arm-based MPUs and RZ/Five 64bit RISC-V based MPU from Renesas Electronics. Currently the following boards and MPUs are supported:
- Board: iWave RZ/G1H-PF Qseven Development Platform R2.1 / MPU: R8A7742 (RZ/G1H)
- Board: iWave RZ/G1M-PF Qseven Development Platform R2.0 / MPU: R8A7743 (RZ/G1M)
- Board: iWave RZ/G1N-PF Qseven Development Platform R3.4 / MPU: R8A7744 (RZ/G1N)
- Board: iWave RZ/G1E-PF SODIMM Development Platform R3.1 / MPU: R8A7745 (RZ/G1E)
- Board: iWave RZ/G1C-PF Pi SBC Development Platform R2.0 / MPU: R8A77470 (RZ/G1C)
- Board: EK874 / MPU: R8A774C0 (RZ/G2E)
- Board: HIHOPE-RZG2M / MPU: R8A774A1 (RZ/G2M v1.3) and R8A774A3 (RZ/G2M v3.0)
- Board: HIHOPE-RZG2N / MPU: R8A774B1 (RZG2N)
- Board: HIHOPE-RZG2H / MPU: R8A774E1 (RZG2H)
- Board: RZG2L SMARC Evaluation Kit / MPU: R9A07G044L (RZ/G2L)
- Board: RZG2L Development Evaluation Kit / MPU: R9A07G044L (RZ/G2L)
- Board: RZG2LC SMARC Evaluation Kit / MPU: R9A07G044C (RZ/G2LC)
- Board: RZG2LC Development Evaluation Kit / MPU: R9A07G044C (RZ/G2L)
- Board: RZG2UL SMARC Evaluation Kit / MPU: R9A07G043U (RZ/G2UL)
- Board: RZG2UL Development Evaluation Kit / MPU: R9A07G043U (RZ/G2UL)
- Board: RZV2L SMARC Evaluation Kit / MPU: R9A07G054L (RZ/V2L)
- Board: RZV2L Development Evaluation Kit / MPU: R9A07G054L (RZ/V2L)
- Board: CSM Solution RZV2M Evaluation Board Kit / MPU: R9A09G011GBG (RZ/V2M)
- Board: Shimafuji Electric RZV2MA Evaluation Board Kit / MPU: R9A09G055MA3GBG (RZ/V2MA)
- Board: RZFive SMARC Evaluation Kit / MPU: R9A07G043F (RZ/Five)
- Board: RZFive SMARC Evaluation Kit / MPU: R9A07G043F (RZ/Five)
- Board: RZG3S SMARC Evaluation Kit / MPU: R9A08G045 (RZ/G3S)
- Board: RZG3S Development Evaluation Kit / MPU: R9A08G045 (RZ/G3S)
To contribute to this layer you should email patches to [email protected]. Please send .patch files as email attachments, not embedded in the email body.
This layer depends on:
URI: git://git.yoctoproject.org/poky
layers: meta, meta-poky, meta-yocto-bsp
branch: dunfell
revision: a9e3cc3b9eab7a83c715bb8440454e8fea852c2a
(tag: dunfell-23.0.31)
For Docker build:
cherry-pick commit eb0915c699fbe86488de172d529f073a30d05b6a
URI: git://git.openembedded.org/meta-openembedded
layers: meta-oe, meta-python, meta-multimedia
branch: dunfell
revision: daa4619fe3fbf8c28f342c4a7163a84a330f7653
URI: https://git.yoctoproject.org/meta-gplv2
layers: meta-gplv2
branch: dunfell
revision: 60b251c25ba87e946a0ca4cdc8d17b1cb09292ac
core-image-qt: Optional (unsupported for RZ/V2M, RZ/V2MA and RZ/G3S)
URI: https://github.com/meta-qt5/meta-qt5.git
layers: meta-qt5
revision: c1b0c9f546289b1592d7a895640de103723a0305
cherry-pick commit 77b6060cef9337b184100083746c2e35f531be74
Docker: Optional (unsupported for RZ/V2M and RZ/V2MA)
URI: https://git.yoctoproject.org/git/meta-virtualization
layers: meta-virtualization
branch: dunfell
revision: 521459bf588435e847d981657485bae8d6f003b5
Assume that $WORK is the current working directory. The following instructions require a Poky installation (or equivalent).
Below git configuration is required:
$ git config --global user.email "[email protected]"
$ git config --global user.name "Your Name"Download proprietary graphics and multimedia drivers from Renesas. To download Multimedia and Graphics library and related Linux drivers, please use the following link:
English: https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-mpus/rzg-linux-platform/rzg-marketplace/verified-linux-package/rzg-verified-linux-package
Japanese: https://www.renesas.com/jp/ja/products/microcontrollers-microprocessors/rz-mpus/rzg-linux-platform/rzg-marketplace/verified-linux-package/rzg-verified-linux-package
Please choose correct packages that matches with your MPU. Graphic drivers are required for Wayland. Multimedia drivers are optional. After downloading the proprietary package, please decompress them then put meta-rz-features folder at $WORK.
Below is the combination of Codec/Graphics library with BSP released versions:
1. RZ/G2{H,M,N,E}:
| BSP Version | Codec Version | Graphics Version |
|---|---|---|
| 3.0.0 - 3.0.2 | 1.0 | 1.0 |
| 3.0.3 | 1.0.1 | 1.0.1 |
| 3.0.5 | 1.0.1 | 1.0.2 |
| 3.0.6 | 1.0.2 | 1.0.2 |
2. RZ/G2{L,LC,UL} and RZ/V2L:
| BSP Version | Codec Version | Graphics Version |
|---|---|---|
| 3.0.0 | 0.58 | 1.2 |
| 3.0.1 | 1.0 | 1.3 |
| 3.0.2 | 1.0.1 | 1.4 |
| 3.0.3 | 1.1.0 | 1.0.5(*1) |
| 3.0.4 | 1.1.0 | 1.1.0(*1) |
| 3.0.5 | 1.1.0 | 1.1.0 |
| 3.0.5-update2 | 1.2.0 | 1.2.0 |
| 3.0.6 | 1.2.1 | 1.2.2 |
(*1) Please note that the naming rule of version is changed from the release. v1.0.5 is newer version of v1.4.
You can get all Yocto build environment from Renesas, or download all Yocto related public source to prepare the build environment as below.
$ git clone https://git.yoctoproject.org/git/poky
$ cd poky
$ git checkout dunfell-23.0.31
$ git cherry-pick eb0915c699fbe86488de172d529f073a30d05b6a
$ cd ..
$
$ git clone https://github.com/openembedded/meta-openembedded
$ cd meta-openembedded
$ git checkout daa4619fe3fbf8c28f342c4a7163a84a330f7653
$ cd ..
$
$ git clone https://git.yoctoproject.org/git/meta-gplv2
$ cd meta-gplv2
$ git checkout 60b251c25ba87e946a0ca4cdc8d17b1cb09292ac
$ cd ..
$
$ git clone https://github.com/renesas-rz/meta-renesas.git
$ cd meta-renesas
$ git checkout <tag>
$ cd ..
$
$ git clone https://github.com/meta-qt5/meta-qt5.git
$ cd meta-qt5
$ git checkout -b tmp c1b0c9f546289b1592d7a895640de103723a0305
$ git cherry-pick 77b6060cef9337b184100083746c2e35f531be74
$ cd ..
$
$ git clone https://git.yoctoproject.org/git/meta-virtualization -b dunfell
$ cd meta-virtualization
$ git checkout 521459bf588435e847d981657485bae8d6f003b5
$ cd ..<tag> can be selected in any tags of meta-renesas. Now the latest version is BSP-3.0.x or BSP-3.0.x-updatey if any new updates are applied.
Currently, there are 2 types of build procedure supported in below description:
1. New build procedure (Recommended):
- Initialize a build using the 'oe-init-build-env' script in Poky and point TEMPLATECONF to platform conf path. e.g.:
$ TEMPLATECONF=$PWD/meta-renesas/meta-<platform>/docs/template/conf/ source poky/oe-init-build-env build
- To build optional features (Docker, Codec or Graphics, QT5, Bootloaders, Security), add necessary layers:
# For Docker $ bitbake-layers add-layer ../meta-openembedded/meta-filesystems $ bitbake-layers add-layer ../meta-openembedded/meta-networking $ bitbake-layers add-layer ../meta-virtualization # For Codec $ bitbake-layers add-layer ../meta-rz-features/meta-rz-codecs # For Graphics $ bitbake-layers add-layer ../meta-rz-features/meta-rz-graphics # For QT5 $ bitbake-layers add-layer ../meta-qt5 # For Bootloaders (only for RZ/V2M and RZ/V2MA) $ bitbake-layers add-layer ../meta-rz-features/meta-rz-bootloaders # For Security (supported for RZ/G2[H,M,N,E], RZ/G2[L,LC,UL] and RZ/V2L) $ bitbake-layers add-layer ../meta-rz-features/meta-rz-security
- Build the target file system image using bitbake:
$ MACHINE=<board> bitbake core-image-<target>
<platform> and <board> can be selected in below table:
| Renesas MPU | platform | board |
|---|---|---|
| RZ/G1M | rzg1 | iwg20m-g1m |
| RZ/G1N | rzg1 | iwg20m-g1n |
| RZ/G1H | rzg1 | iwg21m |
| RZ/G1E | rzg1 | iwg22m |
| RZ/G1C | rzg1 | iwg23s |
| RZ/G2H | rzg2h | hihope-rzg2h |
| RZ/G2M | rzg2h | hihope-rzg2m |
| RZ/G2N | rzg2h | hihope-rzg2n |
| RZ/G2E | rzg2h | ek874 |
| RZ/G2L | rzg2l | smarc-rzg2l, rzg2l-dev |
| RZ/G2LC | rzg2l | smarc-rzg2lc, rzg2lc-dev |
| RZ/G2UL | rzg2l | smarc-rzg2ul, rzg2ul-dev |
| RZ/V2L | rzv2l | smarc-rzv2l, rzv2l-dev |
| RZ/V2M | rzv2m | rzv2m |
| RZ/V2MA | rzv2m | rzv2ma |
| RZ/Five | rzfive | smarc-rzfive, rzfive-dev |
| RZ/G3S | rzg3s | smarc-rzg3s, rzg3s-dev |
2. Build procedure for legacy users (common procedure) (unsupported for RZ/G1 Series, RZ/V2M, RZ/V2MA and RZ/G3S):
- Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
$ source poky/oe-init-build-env - Prepare default configuration files. :
$ cp $WORK/meta-renesas/docs/template/conf/<board>/*.conf ./conf/
<board>: can be selected in any platforms:
- RZ/G2H: hihope-rzg2h
- RZ/G2M: hihope-rzg2m
- RZ/G2N: hihope-rzg2n
- RZ/G2E: ek874
- RZ/G2L: smarc-rzg2l, rzg2l-dev
- RZ/G2LC: smarc-rzg2lc, rzg2lc-dev
- RZ/G2UL: smarc-rzg2ul, rzg2ul-dev
- RZ/V2L: smarc-rzv2l, rzv2l-dev
- RZ/Five: smarc-rzfive, rzfive-dev
- Build the target file system image using bitbake:
$ bitbake core-image-<target>
- To build Docker (optional): comment out a line in conf/local.conf:
DISTRO_FEATURES_remove = " docker"
<target> for these built types:
- RZ/Five, RZ/V2M, RZ/V2MA, RZ/G3S: bsp
- Others: bsp, weston, qt
After completing the images for the target machine will be available in the output directory 'tmp/deploy/images/<supported board name>'.
Images generated:
- Image (generic Linux Kernel binary image file)
- DTB for target machine
- core-image-<target>-<machine name>.tar.bz2 (rootfs tar+bzip2)
- core-image-<target>-<machine name>.ext4 (rootfs ext4 format)
- core-image-<target>-<machine name>.wic.gz (rootfs wic gz format)
- core-image-<target>-<machine name>.wic.bmap (rootfs wic block map format)
Use bitbake -c populate_sdk for generating the toolchain SDK: For 64-bit target SDK (aarch64):
$ bitbake core-image-weston -c populate_sdkThe SDK can be found in the output directory 'tmp/deploy/sdk'
poky-glibc-x86_64-core-image-weston-aarch64-toolchain-x.x.sh
Usage of toolchain SDK: Install the SDK to the default: /opt/poky/x.x For 64-bit target SDK:
$ sh poky-glibc-x86_64-core-image-weston-aarch64-toolchain-x.x.shFor 64-bit application use environment script in /opt/poky/x.x
$ source /opt/poky/x.x/environment-setup-aarch64-poky-linuxIt is possible to change some build configs as below:
- GPLv3: choose to not allow, or allow, GPLv3 packages
- Non-GPLv3 (default): not allow GPLv3 license. All recipes that has GPLv3 license will be downgrade to older version that has alternative license (done by meta-gplv2). In this setting customer can ignore the risk of strict license GPLv3
INCOMPATIBLE_LICENSE = "GPLv3 GPLv3+"- Allow-GPLv3: allow GPLv3 license. If user is fine with strict copy-left license GPLv3, can use this setting to get newer software version.
#INCOMPATIBLE_LICENSE = "GPLv3 GPLv3+" - CIP Core: choose the version of CIP Core to build with. CIP Core are software packages that are maintained for long term by CIP community. You can select by changing "CIP_MODE".
- Buster (default): use as many packages from CIP Core Buster as possible.
CIP_MODE = "Buster"- Bullseye: use as many packages from CIP Core Bullseye.
CIP_MODE = "Bullseye"- None CIP Core: not use CIP Core at all, use all default version from Yocto 3.1 Dunfell
CIP_MODE = "None" or unset CIP_MODE - QT Demo (unsupported for RZ/V2M and RZ/V2MA): choose QT5 Demonstration to build with core-image-qt. QT5 Demos are some applications to demonstrate QT5 framework.
- Unset QT_DEMO (default): all QT5 Demos are not built with core-image-qt.
#QT_DEMO = "1"- Allow QT_DEMO: all QT5 Demos are built and included in core-image-qt.
QT_DEMO = "1" - Realtime Linux (unsupported for RZ/Five, RZ/V2M and RZ/V2MA): choose realtime characteristic of Linux kernel to build with. You can enable this feature by setting the value "1" to IS_RT_BSP variable in local.conf:
IS_RT_BSP = "1" - Create SBoM SPDX: generate JSON SPDX for images.
- Disable creating SBoM SPDX (default): creating SPDX is not supported.
#INHERIT += "create-spdx"- Enable creating SBoM SPDX: creating SPDX is supported and built.
INHERIT += "create-spdx"- Below variables are optional settings to create spdx. Uncomment out them to enable the features (disabled by default):
- SPDX_PRETTY: Make generated files more human readable (newlines, indentation)
SPDX_PRETTY = "1"- SPDX_ARCHIVE_PACKAGED: Add compressed archives of the files in the generated target packages.
SPDX_ARCHIVE_PACKAGED = "1" - When enabling SBoM SPDX support, SDK will be failed to build. To fix it, please apply below changes in "poky/meta/classes/populate_sdk_base.bbclass":
-do_populate_sdk[cleandirs] = "${SDKDEPLOYDIR}" +do_populate_sdk[cleandirs] += "${SDKDEPLOYDIR}"
- WIC image (unsupported for RZ/G1 MPUs): deploy disk images format. It is enabled by default in local.conf. To disable it, please comment out or set 0 to below setting:
If you do not want to use default wic image file, please update "WKS_DEFAULT_FILE" or "WKS_FILE" to your desirable file.
WKS_SUPPORT ?= "1"