Expand timenoflap to timenoflap_heatback, timenoflap_heatover, timenoflap_coolback and timenoflap_coolover

[RaW79]

Hello
during heating operation where my Daikin Siesta (ATXD/ARXD) is in princpal able to hold the target temperature by a low operation status I get several stops of the aircon for several minutes.

According information from community this is because daikin control is always active n the background and when target temperatur is set more than 3 Kelvin below Home-Temperature detected by the indoor unit the unit goes in stop mode.

So therefore the setting heatback was suggested to be reduced which i did by heatback of 4. But this is more or less useless when the control of the faikin sets back the Daikin target temp (brown line) in 2 steps within short time. Each step is below the 4K of heatback setting but 2 steps leads to a bigger difference from target temp (brown line) to home temp (yellow line) which ends up in a stopped aircon (red line from fan, light green line for power consumption).

Please see attached:

So it´s assumed that the setting timenoflap will expand the time between to control steps of the faikin, but this will have a very negative effect when heating up a room. This will need much more time because of this limitation.

Therefore kindly ask to expand timenoflap into timenoflap_heatback (will solve my reported issue) timenoflap_heatover (no change for quick room heatup) and to make it equal please implement same also for cooling. Intention is to avoid this stops when a low level operation is sufficiant.

Big Thanks!

[RaW79]

Because this feature requests is an indirect try to fix the 3K/4K dependency from Daikin, is tthere an Idea how to fix IT directly?
From my Point of View the Faikin ist Always behind the Daikin Control and trying to keep the target value in the Range of Up to 3/4K under IndoorUnit Temperatur will Not Work well because in Case of Temperatur drop the Faikin will detect IT at the Same time as Daikin and IT will therefore be in Stop mode earlier before target value can bei adjusted by the Faikin, right?