Changing auto1 & auto0 by Mqtt?

[RaW79]

Hi

I´m struggeling a lot setting auto0 & auto1 by Mqtt.
autot is working fine with
topic: command/GuestAC
payload: {"autot":22}
or
topic: setting/GuestAC
payload: {"autot":22}

But auto1&auto0 not. also tried with variants like
topic: command/GuestAC/control
payload: {"auto0":22:00}

But no success. Kindly ask for your help.
Thx

[revk]

The help should say HHMM (not HH:MM), and 22:00 is not valid JSON, use 2200. Indeed, even 0700 is not valid JSON so use 700 or "0700" where there is a leading zero.

[RaW79]

Thanks. Can you please inform how it should be send?

command/...
or
setting/....

...../GuestAC
or
...../GuestAC/control

[revk]

setting/NameOfDevice with payload {"auto0":2200}

[RaW79]

Big Thx. Finally afters hours of testing (mainly struggled because of the data format in the payload) it works :)

[revk]

You can also set using the web interface, obviously.

[RaW79]

Sure. But intention is to make it operatable for everyone inside our house. Grandparents can not use a webinterface and therefore created this touch display: #490

See photo 3 which is for operation of auto0 & auto1