[FEATURE] Improve swing mode Home Assistant Integration

[Floyd-Schramm]

Daikin hardware
Indoor Unit FTXA25C2V1BB, Faikin connected to free S21 port, original WiFi module BRP069C4x installed

Is your feature request related to a problem? Please describe.
After integrating the Faikin modules in Home Assistant I noticed that the swing modes are not translated correctly. As seen in the below screenshots, the modes available are named "H" instead of "Horizontal" for example. This difference to the HA default swing also causes the problem that there is no icon available for the swing mode "H".

Describe the solution you'd like
A better, Home Assistant specific, integration using the default swing mode values described in the official HA docs
SWING_OFF, SWING_VERTICAL, SWING_HORIZONTAL, SWING_BOTH.
I am not sure how to integrate the comfort mode as there is no default value in HA, but all other standard Daikin swing modes should be implemented as stated above.

Describe alternatives you've considered
Live with the current situation, as renaming or overwriting within HA is too much trouble :D

[revk]

I cannot easily test as I don't have that icon/option on my HA for some reason.

If you set otahost to test.revk.uk and turn off otabeta and upgrade you will see changes.

Let me know if they work, and I can make a beta.

[revk]

I was able to test, and seems to work, bus my HA is not showing anything special apart from those names, e.g. SWING_HORIZONTAL. Does yours show any better?

I have made a beta release now, so just try a normal update to beta.

[Floyd-Schramm]

If that is the case, I will have to open a feature request for Home Assistant directly.
I just tried to update to the beta release by enabling OTA beta updates, then pressing update. Now the ESP does not start anymore, and I get a Timeout when trying to reach it: