From e687fdbcbcd2c01e2617e2c519d0bc1183371cad Mon Sep 17 00:00:00 2001 From: blmorris Date: Fri, 11 Jul 2014 16:14:01 -0400 Subject: [PATCH 1/5] Add keyword argument 'memaddr_use_16b' to i2c.mem_read and mem_write methods to allow these methods to transmit 16 bit addresses to an i2c device Add 'memaddr_use_16b' to qstrdefsport.h --- stmhal/i2c.c | 21 +++++++++++++++++---- stmhal/qstrdefsport.h | 1 + 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/stmhal/i2c.c b/stmhal/i2c.c index 9a616c6d62de..604572c0f4ba 100644 --- a/stmhal/i2c.c +++ b/stmhal/i2c.c @@ -453,7 +453,7 @@ STATIC mp_obj_t pyb_i2c_recv(uint n_args, const mp_obj_t *args, mp_map_t *kw_arg } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv); -/// \method mem_read(data, addr, memaddr, timeout=5000) +/// \method mem_read(data, addr, memaddr, timeout=5000, memaddr_use_16b=False) /// /// Read from the memory of an I2C device: /// @@ -461,6 +461,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv); /// - `addr` is the I2C device address /// - `memaddr` is the memory location within the I2C device /// - `timeout` is the timeout in milliseconds to wait for the read +/// - `memaddr_use_16b` selects width of memaddr: 8 or 16 bits /// /// Returns the read data. /// This is only valid in master mode. @@ -469,6 +470,7 @@ STATIC const mp_arg_t pyb_i2c_mem_read_args[] = { { MP_QSTR_addr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_memaddr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 5000} }, + { MP_QSTR_memaddr_use_16b, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, }; #define PYB_I2C_MEM_READ_NUM_ARGS MP_ARRAY_SIZE(pyb_i2c_mem_read_args) @@ -490,8 +492,13 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw // get the addresses mp_uint_t i2c_addr = vals[1].u_int << 1; mp_uint_t mem_addr = vals[2].u_int; + // determine width of mem_addr + mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT; + if( vals[4].u_bool ) { + mem_addr_size = I2C_MEMADD_SIZE_16BIT; + } - HAL_StatusTypeDef status = HAL_I2C_Mem_Read(self->i2c, i2c_addr, mem_addr, I2C_MEMADD_SIZE_8BIT, bufinfo.buf, bufinfo.len, vals[3].u_int); + HAL_StatusTypeDef status = HAL_I2C_Mem_Read(self->i2c, i2c_addr, mem_addr, mem_addr_size, bufinfo.buf, bufinfo.len, vals[3].u_int); if (status != HAL_OK) { // TODO really need a HardwareError object, or something @@ -507,7 +514,7 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read); -/// \method mem_write(data, addr, memaddr, timeout=5000) +/// \method mem_write(data, addr, memaddr, timeout=5000, memaddr_use_16b=False) /// /// Write to the memory of an I2C device: /// @@ -515,6 +522,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read); /// - `addr` is the I2C device address /// - `memaddr` is the memory location within the I2C device /// - `timeout` is the timeout in milliseconds to wait for the write +/// - `memaddr_use_16b` selects width of memaddr: 8 or 16 bits /// /// Returns `None`. /// This is only valid in master mode. @@ -537,8 +545,13 @@ STATIC mp_obj_t pyb_i2c_mem_write(uint n_args, const mp_obj_t *args, mp_map_t *k // get the addresses mp_uint_t i2c_addr = vals[1].u_int << 1; mp_uint_t mem_addr = vals[2].u_int; + // determine width of mem_addr + mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT; + if( vals[4].u_bool ) { + mem_addr_size = I2C_MEMADD_SIZE_16BIT; + } - HAL_StatusTypeDef status = HAL_I2C_Mem_Write(self->i2c, i2c_addr, mem_addr, I2C_MEMADD_SIZE_8BIT, bufinfo.buf, bufinfo.len, vals[3].u_int); + HAL_StatusTypeDef status = HAL_I2C_Mem_Write(self->i2c, i2c_addr, mem_addr, mem_addr_size, bufinfo.buf, bufinfo.len, vals[3].u_int); if (status != HAL_OK) { // TODO really need a HardwareError object, or something diff --git a/stmhal/qstrdefsport.h b/stmhal/qstrdefsport.h index 6bf7c52d8a6b..e4f7228bc0dd 100644 --- a/stmhal/qstrdefsport.h +++ b/stmhal/qstrdefsport.h @@ -160,6 +160,7 @@ Q(baudrate) Q(gencall) Q(data) Q(memaddr) +Q(memaddr_use_16b) Q(timeout) Q(init) Q(deinit) From 847a6b30b17493853322532a40f48afb1d975d2e Mon Sep 17 00:00:00 2001 From: blmorris Date: Fri, 11 Jul 2014 21:18:09 -0400 Subject: [PATCH 2/5] Incorporate stylistic changes suggested by @dhylands --- stmhal/i2c.c | 18 +++++++++--------- stmhal/qstrdefsport.h | 2 +- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/stmhal/i2c.c b/stmhal/i2c.c index 604572c0f4ba..25180e512f22 100644 --- a/stmhal/i2c.c +++ b/stmhal/i2c.c @@ -453,7 +453,7 @@ STATIC mp_obj_t pyb_i2c_recv(uint n_args, const mp_obj_t *args, mp_map_t *kw_arg } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv); -/// \method mem_read(data, addr, memaddr, timeout=5000, memaddr_use_16b=False) +/// \method mem_read(data, addr, memaddr, timeout=5000, use_16bit_addr=False) /// /// Read from the memory of an I2C device: /// @@ -461,7 +461,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv); /// - `addr` is the I2C device address /// - `memaddr` is the memory location within the I2C device /// - `timeout` is the timeout in milliseconds to wait for the read -/// - `memaddr_use_16b` selects width of memaddr: 8 or 16 bits +/// - `use_16bit_addr` selects width of memaddr: 8 or 16 bits /// /// Returns the read data. /// This is only valid in master mode. @@ -470,7 +470,7 @@ STATIC const mp_arg_t pyb_i2c_mem_read_args[] = { { MP_QSTR_addr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_memaddr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 5000} }, - { MP_QSTR_memaddr_use_16b, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, + { MP_QSTR_use_16bit_addr, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, }; #define PYB_I2C_MEM_READ_NUM_ARGS MP_ARRAY_SIZE(pyb_i2c_mem_read_args) @@ -494,8 +494,8 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw mp_uint_t mem_addr = vals[2].u_int; // determine width of mem_addr mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT; - if( vals[4].u_bool ) { - mem_addr_size = I2C_MEMADD_SIZE_16BIT; + if (vals[4].u_bool) { + mem_addr_size = I2C_MEMADD_SIZE_16BIT; } HAL_StatusTypeDef status = HAL_I2C_Mem_Read(self->i2c, i2c_addr, mem_addr, mem_addr_size, bufinfo.buf, bufinfo.len, vals[3].u_int); @@ -514,7 +514,7 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read); -/// \method mem_write(data, addr, memaddr, timeout=5000, memaddr_use_16b=False) +/// \method mem_write(data, addr, memaddr, timeout=5000, use_16bit_addr=False) /// /// Write to the memory of an I2C device: /// @@ -522,7 +522,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read); /// - `addr` is the I2C device address /// - `memaddr` is the memory location within the I2C device /// - `timeout` is the timeout in milliseconds to wait for the write -/// - `memaddr_use_16b` selects width of memaddr: 8 or 16 bits +/// - `use_16bit_addr` selects width of memaddr: 8 or 16 bits /// /// Returns `None`. /// This is only valid in master mode. @@ -547,8 +547,8 @@ STATIC mp_obj_t pyb_i2c_mem_write(uint n_args, const mp_obj_t *args, mp_map_t *k mp_uint_t mem_addr = vals[2].u_int; // determine width of mem_addr mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT; - if( vals[4].u_bool ) { - mem_addr_size = I2C_MEMADD_SIZE_16BIT; + if (vals[4].u_bool) { + mem_addr_size = I2C_MEMADD_SIZE_16BIT; } HAL_StatusTypeDef status = HAL_I2C_Mem_Write(self->i2c, i2c_addr, mem_addr, mem_addr_size, bufinfo.buf, bufinfo.len, vals[3].u_int); diff --git a/stmhal/qstrdefsport.h b/stmhal/qstrdefsport.h index e4f7228bc0dd..eb22d616b30c 100644 --- a/stmhal/qstrdefsport.h +++ b/stmhal/qstrdefsport.h @@ -160,7 +160,7 @@ Q(baudrate) Q(gencall) Q(data) Q(memaddr) -Q(memaddr_use_16b) +Q(use_16bit_addr) Q(timeout) Q(init) Q(deinit) From ef204733d6abc31b09e4e7823d4665fafebd87ed Mon Sep 17 00:00:00 2001 From: blmorris Date: Tue, 15 Jul 2014 15:10:56 -0400 Subject: [PATCH 3/5] Initial commit of Myriad2 board-specific configuration files --- stmhal/boards/MYRIAD2/mpconfigboard.h | 39 ++ stmhal/boards/MYRIAD2/pins.csv | 46 +++ stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h | 393 +++++++++++++++++++++ 3 files changed, 478 insertions(+) create mode 100644 stmhal/boards/MYRIAD2/mpconfigboard.h create mode 100644 stmhal/boards/MYRIAD2/pins.csv create mode 100644 stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h diff --git a/stmhal/boards/MYRIAD2/mpconfigboard.h b/stmhal/boards/MYRIAD2/mpconfigboard.h new file mode 100644 index 000000000000..0880a6bc35f9 --- /dev/null +++ b/stmhal/boards/MYRIAD2/mpconfigboard.h @@ -0,0 +1,39 @@ +#define PYBV10 // To maintain support for LED intensity - see led.c (maybe usart.c also?) + +#define MICROPY_HW_BOARD_NAME "Myriad2" +#define MICROPY_HW_MCU_NAME "STM32F405RG" + +#define MICROPY_HW_HAS_SWITCH (1) +#define MICROPY_HW_HAS_SDCARD (1) +#define MICROPY_HW_HAS_MMA7660 (0) //blm +#define MICROPY_HW_HAS_LIS3DSH (0) +#define MICROPY_HW_HAS_LCD (0) //blm +#define MICROPY_HW_ENABLE_RNG (1) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_SERVO (1) +#define MICROPY_HW_ENABLE_DAC (1) +#define MICROPY_HW_ENABLE_I2C1 (1) +#define MICROPY_HW_ENABLE_SPI1 (1) +#define MICROPY_HW_ENABLE_SPI3 (0) +#define MICROPY_HW_ENABLE_CC3K (0) + +// USRSW has no pullup or pulldown, and placing the jumper makes the input go low +#define MICROPY_HW_USRSW_PIN (pin_A13) +#define MICROPY_HW_USRSW_PULL (GPIO_PULLUP) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING) +#define MICROPY_HW_USRSW_PRESSED (0) + +// The pyboard has 4 LEDs +#define MICROPY_HW_LED1 (pin_C4) // LED1 +#define MICROPY_HW_LED2 (pin_C5) // LED2 +#define MICROPY_HW_LED3 (pin_B5) // red +#define MICROPY_HW_LED4 (pin_B4) // green +#define MICROPY_HW_LED_OTYPE (GPIO_MODE_OUTPUT_OD) +#define MICROPY_HW_LED_ON(pin) (pin->gpio->BSRRH = pin->pin_mask) +#define MICROPY_HW_LED_OFF(pin) (pin->gpio->BSRRL = pin->pin_mask) + +// SD card detect switch +#define MICROPY_HW_SDCARD_DETECT_PIN (pin_A8) +#define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLUP) +#define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) diff --git a/stmhal/boards/MYRIAD2/pins.csv b/stmhal/boards/MYRIAD2/pins.csv new file mode 100644 index 000000000000..ff224ff02bc6 --- /dev/null +++ b/stmhal/boards/MYRIAD2/pins.csv @@ -0,0 +1,46 @@ +X1,PA0 +X2,PA1 +X3,PA2 +X4,PA3 +X5,PA4 +X6,PA5 +X7,PA6 +X8,PA7 +X9,PB6 +X10,PB7 +X13,Reset +X14,GND +X15,3.3V +X16,VIN +X17,PB3 +X18,PC13 +X19,PC0 +X20,PC1 +X21,PC2 +X22,PC3 +X23,A3.3V +X24,AGND +Y1,PC6 +Y2,PC7 +Y3,PB8 +Y4,PB9 +Y5,PB12 +Y6,PB13 +Y7,PB14 +Y8,PB15 +Y9,PB10 +Y10,PB11 +Y11,PB0 +Y12,PB1 +Y13,Reset +Y14,GND +Y15,3.3V +Y16,VIN +LED1,PC4 +LED2,PC5 +LED3,PB5 +LED4,PB4 +SW,PA13 +SD,PA8 + + diff --git a/stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h b/stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h new file mode 100644 index 000000000000..a170946a040a --- /dev/null +++ b/stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h @@ -0,0 +1,393 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @author MCD Application Team + * @version V1.0.1 + * @date 26-February-2014 + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +#define STM32F405xx +#define USE_USB_FS + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CAN_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DCMI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +#define HAL_ETH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_NAND_MODULE_ENABLED +#define HAL_NOR_MODULE_ENABLED +#define HAL_PCCARD_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +/* #define HAL_SDRAM_MODULE_ENABLED */ +#define HAL_HASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LTDC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +/* #define HAL_SAI_MODULE_ENABLED */ +#define HAL_SD_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)24000000) /*!< Value of the External oscillator in Hz */ /*For Myriad2*/ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 1 +#define DATA_CACHE_ENABLE 1 + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2 +#define MAC_ADDR1 0 +#define MAC_ADDR2 0 +#define MAC_ADDR3 0 +#define MAC_ADDR4 0 +#define MAC_ADDR5 0 + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ From 86f0b31bcf34b54d8b77f8de2ffe34cae5c7a56a Mon Sep 17 00:00:00 2001 From: blmorris Date: Mon, 21 Jul 2014 22:45:04 -0400 Subject: [PATCH 4/5] Change boolean 'use_16bit_addr' to int 'addr_size', can be either 8 or 16 bits, default value is 8 to maintain compatibility with existing code. --- stmhal/i2c.c | 18 +++++++++--------- stmhal/qstrdefsport.h | 2 +- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/stmhal/i2c.c b/stmhal/i2c.c index 25180e512f22..ac50127a79ed 100644 --- a/stmhal/i2c.c +++ b/stmhal/i2c.c @@ -453,7 +453,7 @@ STATIC mp_obj_t pyb_i2c_recv(uint n_args, const mp_obj_t *args, mp_map_t *kw_arg } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv); -/// \method mem_read(data, addr, memaddr, timeout=5000, use_16bit_addr=False) +/// \method mem_read(data, addr, memaddr, timeout=5000, addr_size=8) /// /// Read from the memory of an I2C device: /// @@ -461,7 +461,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv); /// - `addr` is the I2C device address /// - `memaddr` is the memory location within the I2C device /// - `timeout` is the timeout in milliseconds to wait for the read -/// - `use_16bit_addr` selects width of memaddr: 8 or 16 bits +/// - `addr_size` selects width of memaddr: 8 or 16 bits /// /// Returns the read data. /// This is only valid in master mode. @@ -470,7 +470,7 @@ STATIC const mp_arg_t pyb_i2c_mem_read_args[] = { { MP_QSTR_addr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_memaddr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 5000} }, - { MP_QSTR_use_16bit_addr, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, + { MP_QSTR_addr_size, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 8} }, }; #define PYB_I2C_MEM_READ_NUM_ARGS MP_ARRAY_SIZE(pyb_i2c_mem_read_args) @@ -492,9 +492,9 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw // get the addresses mp_uint_t i2c_addr = vals[1].u_int << 1; mp_uint_t mem_addr = vals[2].u_int; - // determine width of mem_addr + // determine width of mem_addr; default is 8 bits, entering any other value gives 16 bit width mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT; - if (vals[4].u_bool) { + if (vals[4].u_int != 8) { mem_addr_size = I2C_MEMADD_SIZE_16BIT; } @@ -514,7 +514,7 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read); -/// \method mem_write(data, addr, memaddr, timeout=5000, use_16bit_addr=False) +/// \method mem_write(data, addr, memaddr, timeout=5000, addr_size=8) /// /// Write to the memory of an I2C device: /// @@ -522,7 +522,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read); /// - `addr` is the I2C device address /// - `memaddr` is the memory location within the I2C device /// - `timeout` is the timeout in milliseconds to wait for the write -/// - `use_16bit_addr` selects width of memaddr: 8 or 16 bits +/// - `addr_size` selects width of memaddr: 8 or 16 bits /// /// Returns `None`. /// This is only valid in master mode. @@ -545,9 +545,9 @@ STATIC mp_obj_t pyb_i2c_mem_write(uint n_args, const mp_obj_t *args, mp_map_t *k // get the addresses mp_uint_t i2c_addr = vals[1].u_int << 1; mp_uint_t mem_addr = vals[2].u_int; - // determine width of mem_addr + // determine width of mem_addr; default is 8 bits, entering any other value gives 16 bit width mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT; - if (vals[4].u_bool) { + if (vals[4].u_int != 8) { mem_addr_size = I2C_MEMADD_SIZE_16BIT; } diff --git a/stmhal/qstrdefsport.h b/stmhal/qstrdefsport.h index 8d277fdedc9a..b5b4a4e4a0d7 100644 --- a/stmhal/qstrdefsport.h +++ b/stmhal/qstrdefsport.h @@ -161,7 +161,7 @@ Q(baudrate) Q(gencall) Q(data) Q(memaddr) -Q(use_16bit_addr) +Q(addr_size) Q(timeout) Q(init) Q(deinit) From 7a03b5f56aa1f84ec9eda7c8b940aaf9218f0fd9 Mon Sep 17 00:00:00 2001 From: blmorris Date: Mon, 21 Jul 2014 23:12:07 -0400 Subject: [PATCH 5/5] remove Myriad2 board config files from master --- stmhal/boards/MYRIAD2/mpconfigboard.h | 39 -- stmhal/boards/MYRIAD2/pins.csv | 46 --- stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h | 393 --------------------- 3 files changed, 478 deletions(-) delete mode 100644 stmhal/boards/MYRIAD2/mpconfigboard.h delete mode 100644 stmhal/boards/MYRIAD2/pins.csv delete mode 100644 stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h diff --git a/stmhal/boards/MYRIAD2/mpconfigboard.h b/stmhal/boards/MYRIAD2/mpconfigboard.h deleted file mode 100644 index 0880a6bc35f9..000000000000 --- a/stmhal/boards/MYRIAD2/mpconfigboard.h +++ /dev/null @@ -1,39 +0,0 @@ -#define PYBV10 // To maintain support for LED intensity - see led.c (maybe usart.c also?) - -#define MICROPY_HW_BOARD_NAME "Myriad2" -#define MICROPY_HW_MCU_NAME "STM32F405RG" - -#define MICROPY_HW_HAS_SWITCH (1) -#define MICROPY_HW_HAS_SDCARD (1) -#define MICROPY_HW_HAS_MMA7660 (0) //blm -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) //blm -#define MICROPY_HW_ENABLE_RNG (1) -#define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (1) -#define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_I2C1 (1) -#define MICROPY_HW_ENABLE_SPI1 (1) -#define MICROPY_HW_ENABLE_SPI3 (0) -#define MICROPY_HW_ENABLE_CC3K (0) - -// USRSW has no pullup or pulldown, and placing the jumper makes the input go low -#define MICROPY_HW_USRSW_PIN (pin_A13) -#define MICROPY_HW_USRSW_PULL (GPIO_PULLUP) -#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING) -#define MICROPY_HW_USRSW_PRESSED (0) - -// The pyboard has 4 LEDs -#define MICROPY_HW_LED1 (pin_C4) // LED1 -#define MICROPY_HW_LED2 (pin_C5) // LED2 -#define MICROPY_HW_LED3 (pin_B5) // red -#define MICROPY_HW_LED4 (pin_B4) // green -#define MICROPY_HW_LED_OTYPE (GPIO_MODE_OUTPUT_OD) -#define MICROPY_HW_LED_ON(pin) (pin->gpio->BSRRH = pin->pin_mask) -#define MICROPY_HW_LED_OFF(pin) (pin->gpio->BSRRL = pin->pin_mask) - -// SD card detect switch -#define MICROPY_HW_SDCARD_DETECT_PIN (pin_A8) -#define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLUP) -#define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) diff --git a/stmhal/boards/MYRIAD2/pins.csv b/stmhal/boards/MYRIAD2/pins.csv deleted file mode 100644 index ff224ff02bc6..000000000000 --- a/stmhal/boards/MYRIAD2/pins.csv +++ /dev/null @@ -1,46 +0,0 @@ -X1,PA0 -X2,PA1 -X3,PA2 -X4,PA3 -X5,PA4 -X6,PA5 -X7,PA6 -X8,PA7 -X9,PB6 -X10,PB7 -X13,Reset -X14,GND -X15,3.3V -X16,VIN -X17,PB3 -X18,PC13 -X19,PC0 -X20,PC1 -X21,PC2 -X22,PC3 -X23,A3.3V -X24,AGND -Y1,PC6 -Y2,PC7 -Y3,PB8 -Y4,PB9 -Y5,PB12 -Y6,PB13 -Y7,PB14 -Y8,PB15 -Y9,PB10 -Y10,PB11 -Y11,PB0 -Y12,PB1 -Y13,Reset -Y14,GND -Y15,3.3V -Y16,VIN -LED1,PC4 -LED2,PC5 -LED3,PB5 -LED4,PB4 -SW,PA13 -SD,PA8 - - diff --git a/stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h b/stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h deleted file mode 100644 index a170946a040a..000000000000 --- a/stmhal/boards/MYRIAD2/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,393 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf.h - * @author MCD Application Team - * @version V1.0.1 - * @date 26-February-2014 - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2014 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -#define STM32F405xx -#define USE_USB_FS - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -#define HAL_CAN_MODULE_ENABLED -#define HAL_CRC_MODULE_ENABLED -#define HAL_CRYP_MODULE_ENABLED -#define HAL_DAC_MODULE_ENABLED -#define HAL_DCMI_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -#define HAL_ETH_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_NAND_MODULE_ENABLED -#define HAL_NOR_MODULE_ENABLED -#define HAL_PCCARD_MODULE_ENABLED -#define HAL_SRAM_MODULE_ENABLED -/* #define HAL_SDRAM_MODULE_ENABLED */ -#define HAL_HASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -#define HAL_I2C_MODULE_ENABLED -#define HAL_I2S_MODULE_ENABLED -#define HAL_IWDG_MODULE_ENABLED -#define HAL_LTDC_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_RNG_MODULE_ENABLED -#define HAL_RTC_MODULE_ENABLED -/* #define HAL_SAI_MODULE_ENABLED */ -#define HAL_SD_MODULE_ENABLED -#define HAL_SPI_MODULE_ENABLED -#define HAL_TIM_MODULE_ENABLED -#define HAL_UART_MODULE_ENABLED -#define HAL_USART_MODULE_ENABLED -#define HAL_IRDA_MODULE_ENABLED -#define HAL_SMARTCARD_MODULE_ENABLED -#define HAL_WWDG_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED -#define HAL_HCD_MODULE_ENABLED - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -#define HSE_VALUE ((uint32_t)24000000) /*!< Value of the External oscillator in Hz */ /*For Myriad2*/ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define USE_RTOS 0 -#define PREFETCH_ENABLE 1 -#define INSTRUCTION_CACHE_ENABLE 1 -#define DATA_CACHE_ENABLE 1 - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2 -#define MAC_ADDR1 0 -#define MAC_ADDR2 0 -#define MAC_ADDR3 0 -#define MAC_ADDR4 0 -#define MAC_ADDR5 0 - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0) -#endif /* USE_FULL_ASSERT */ - - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/