This is the second Release Candidate of the Rotorflight 2.1 Lua Scripts for Ethos.
NOTE: The final 2.1.0 Lua Scripts will be released after a few release candidates. Please don't use RCs once the final release is out.
The download locations are:
- Rotorflight Configurator
- Rotorflight Blackbox
- Lua Scripts for EdgeTX and OpenTX
- Lua Scripts for FrSky Ethos
- Lua Suite for FrSky Ethos
- Rotorflight setup instructions can be found on the RF website www.rotorflight.org.
- RF 2.1 is backward compatible with RF 2.0. You can load your configuration dump from RF 2.0 into 2.1.
- If updating from RF1, please setup your helicopter from scratch. Follow the instructions on the website.
- As always, please double check your configuration on the bench before flying!
- Added support for custom CRSF/ELRS telemetry
- Added automatic profile switching to all Profile pages
- Added a Status page which
- Shows the currently active PID and rate profile numbers
- Shows Arming Disabled Flags, if any
- Shows the amount of free space on a dataflash, if available. It also offers the option to erase the dataflash.
- Shows Real-time and CPU load
- The PIDs and Rates pages
- Now also show the currently active profile
- You can change and copy the currently active profile
- Servo page
- Changing the center of a servo now automatically sets servo override for the servo being editted
- Added button Override All Servos
- Added Model on TX page, with which you can automatically set model name, timers or global variables on your transmitter. Data is stored on the heli, so you can have different timers for your helis while using just one model on the transmitter.
- Profile - Governor page: added Min throttle
- Added Experimental page for firmware testing purposes
- Added page ESC - FlyRotor
- Added page ESC - HW Platinum V5
- Added page ESC - Scorpion Tribunus
- Added page ESC - YGE
- Added Settings page for hiding irrelevant pages
- Changing a value using the scroll wheel will go quicker if you scroll fast
- If you try to Save while armed a warning will be given
- Reformatted the Rescue page, so the different rescue stages are now more clear
- Improved accessibility by reordering some pages and fields
- Improved MSP handling and processing
- ESC - FlyRotor page: added governor support
- Profile - Governor page: added Min throttle
- Fix: corrected GPS coordinates in custom telemetry script
- Fix: use GV8 on flightmode 8 for storing pilotConfigSet
This is the first Release Candidate of the Rotorflight 2.1 Lua Scripts for Ethos.
NOTE: The final 2.1.0 Lua Scripts will be released after a few release candidates. Please don't use RCs once the final release is out.
The download locations are:
- Rotorflight Configurator
- Rotorflight Blackbox
- Lua Scripts for EdgeTX and OpenTX
- Lua Scripts for FrSky Ethos
- Lua Suite for FrSky Ethos
- Rotorflight setup instructions can be found on the RF website www.rotorflight.org.
- RF 2.1 is backward compatible with RF 2.0. You can load your configuration dump from RF 2.0 into 2.1.
- If updating from RF1, please setup your helicopter from scratch. Follow the instructions on the website.
- As always, please double check your configuration on the bench before flying!
- Added support for custom CRSF/ELRS telemetry
- Added automatic profile switching to all Profile pages
- Added a Status page which
- Shows the currently active PID and rate profile numbers
- Shows Arming Disabled Flags, if any
- Shows the amount of free space on a dataflash, if available. It also offers the option to erase the dataflash.
- Shows Real-time and CPU load
- The PIDs and Rates pages
- Now also show the currently active profile
- You can change and copy the currently active profile
- Servo page
- Changing the center of a servo now automatically sets servo override for the servo being editted
- Added button Override All Servos
- Added Model on TX page, with which you can automatically set model name, timers or global variables on your transmitter. Data is stored on the heli, so you can have different timers for your helis while using just one model on the transmitter.
- Added Experimental page for firmware testing purposes
- Added page ESC - FlyRotor
- Added page ESC - HW Platinum V5
- Added page ESC - Scorpion Tribunus
- Added page ESC - YGE
- Added Settings page for hiding irrelevant pages
- Changing a value using the scroll wheel will go quicker if you scroll fast
- If you try to Save while armed a warning will be given
- Reformatted the Rescue page, so the different rescue stages are now more clear
- Improved accessibility by reordering some pages and fields
- Improved MSP handling and processing
- Added page ESC - FlyRotor
- Added Settings page
- Added Experimental page for firmware testing purposes
- Various ELRS custom telemetry fixes
This is a development snapshot of the Rotorflight 2.1 Lua Scripts for EdgeTX/OpenTX.
This version is intended to be used for beta-testing only. It is not fully working nor stable, and should not be used by end-users.
For more information, please join the Rotorflight Discord chat.
The download locations are:
- Rotorflight Configurator
- Rotorflight Blackbox
- Lua Scripts for EdgeTx and OpenTx
- Lua Scripts for FrSky Ethos
- Added automatic profile switching to all Profile pages
- Added Model on TX page, with which you can soon automatically set model name, timers or global variables on your transmitter.
- Improved MSP handling
This is a development snapshot of the Rotorflight 2.1 Lua Scripts for FrSky Ethos.
This version is intended to be used for beta-testing only. It is not fully working nor stable, and should not be used by end-users.
For more information, please join the Rotorflight Discord chat.
The download locations are:
- Rotorflight Configurator
- Rotorflight Blackbox
- Lua Scripts for EdgeTx and OpenTx
- Lua Scripts for FrSky Ethos
- Simplified MSP processing by using a message queue.
- Added support for chained (multiple) MSP calls.
- Added MSP message support for use in transmitter simulators.
- Fields now support preEdit, change and postEdit events.
- Changing a value using the scroll wheel will go faster if you scroll fast.
- Added support for 480x320 (Jumper T15).
- Added a new Status page which
- Shows the currently active PID and rate profile numbers.
- Show Arming Disabled Flags, if any.
- Shows the amount of free space on a dataflash, if available. It also offers the option to erase the dataflash.
- Shows Real-time and CPU load.
- The PIDs and Rates pages
- Now also show the currently active profile.
- You can also change and copy the currently active profile.
- If the active profile has been changed externally (e.g. by using Adjustments), the page will now automatically refresh.
- Servo page:
- Changing the center of a servo now automatically sets servo override for the servo being editted.
- Added button 'Override All Servos'.
- Reformatted the Rescue page, so the different rescue stages are now more clear.
- Improved accessibility by reordering pages and fields.
- If you try to Save while armed a warning will be given.
- Added page 'ESC - HW Platinum V5'.
- Added page 'ESC - Scorpion Tribunus'.
- Added page 'ESC - YGE'.
This is the 2.0.0 release of the Rotorflight Lua Scripts for FrSky Ethos.
For instructions and other details, please read the README.
The official download locations for Rotorflight 2.0.0 are:
- Rotorflight Configurator
- Rotorflight Blackbox
- Lua Scripts for EdgeTx and OpenTx
- Lua Scripts for FrSky Ethos
-
There is a new website www.rotorflight.org for Rotorflight 2. The old Wiki in GitHub is deprecated, and is for Rotorflight 1 only. Big thanks to the documentation team for setting this up!
-
Rotorflight 2 is NOT backward compatible with RF1. You MUST NOT load your configuration dump from RF1 into RF2.
-
If coming from RF1, please setup your helicopter from scratch for RF2. Follow the instructions on the website!
-
As always, please double check your configuration on the bench before flying!
The main source of Rotorflight information and instructions is now the website.
Rotorflight has a strong presence on the Discord platform - you can join us here. Discord is the primary location for support, questions and discussions. The developers are all active there, and so are the manufacturers of RF Flight Controllers. Many pro pilots are also there. This is a great place to ask for advice or discuss any complicated problems or even new ideas.
There is also a Rotorflight Facebook Group for hanging out with other Rotorflight pilots.
A full changelog can be found online.
- Enhanced stability due to increased independence from other Ethos Lua scripts.
This is the second Release Candidate of the Rotorflight Lua Scripts for FrSky Ethos.
For instructions and other details, please read the README.
The official download locations for Rotorflight 2.0.0-RC2 are:
- Rotorflight Configurator
- Rotorflight Blackbox
- Lua Scripts for EdgeTx and OpenTx
- Lua Scripts for FrSky Ethos
-
There is a new website www.rotorflight.org for Rotorflight 2. The old Wiki in github is deprecated, and is for Rotorflight-1 only. Big thanks to the documentation team for setting this up!
-
Rotorflight 2 is NOT backward compatible with RF1. You MUST NOT load your configuration dump from RF1 into RF2.
-
If coming from RF1, please setup your helicopter from scratch for RF2. Follow the instructions on the website!
-
As always, please double check your configuration on the bench before flying!
The main source of Rotorflight information and instructions is now the website.
Rotorflight has a strong presence on the Discord platform - you can join us here. Discord is the primary location for support, questions and discussions. The developers are all active there, and so are the manufacturers of RF Flight Controllers. Many pro pilots are also there. This is a great place to ask for advice or discuss any complicated problems or even new ideas.
There is also a Rotorflight Facebook Group for hanging out with other Rotorflight pilots.
A full changelog can be found online later.
- Remove cyclic (swash) ring
- Remove Rescue Altitude hold
- Remove PID mode
- Update README.md
This is the first Release Candidate of the Rotorflight 2 Lua Scripts for FrSky Ethos.
For instructions and other details, please read the README.
The official download locations for Rotorflight 2.0.0-RC1 are:
-
There is a new website www.rotorflight.org for Rotorflight 2. The old Wiki in github is deprecated, and is for Rotorflight-1 only. Big thanks to the documentation team for setting this up!
-
Rotorflight 2 is NOT backward compatible with RF1. You MUST NOT load your configuration dump from RF1 into RF2.
-
If coming from RF1, please setup your helicopter from scratch for RF2. Follow the instructions on the website!
-
As always, please double check your configuration on the bench before flying!
The main source of Rotorflight information and instructions is now the website.
Rotorflight has a strong presence on the Discord platform - you can join us here. Discord is the primary location for support, questions and discussions. The developers are all active there, and so are the manufacturers of RF Flight Controllers. Many pro pilots are also there. This is a great place to ask for advice or discuss any complicated problems or even new ideas.
There is also a Rotorflight Facebook Group for hanging out with other Rotorflight pilots.
A full changelog can be found online later.
- Added Servos page
- Aligned MSP messages with the firmware