diff --git a/compiler/rustc_codegen_ssa/src/codegen_attrs.rs b/compiler/rustc_codegen_ssa/src/codegen_attrs.rs
index a5acd8170ab81..87f43a63e6ce1 100644
--- a/compiler/rustc_codegen_ssa/src/codegen_attrs.rs
+++ b/compiler/rustc_codegen_ssa/src/codegen_attrs.rs
@@ -249,10 +249,9 @@ fn codegen_fn_attrs(tcx: TyCtxt<'_>, did: LocalDefId) -> CodegenFnAttrs {
                 {
                     if tcx.sess.target.is_like_wasm || tcx.sess.opts.actually_rustdoc {
                         // The `#[target_feature]` attribute is allowed on
-                        // WebAssembly targets on all functions, including safe
-                        // ones. Other targets require that `#[target_feature]` is
-                        // only applied to unsafe functions (pending the
-                        // `target_feature_11` feature) because on most targets
+                        // WebAssembly targets on all functions. Prior to stabilizing
+                        // the `target_feature_11` feature, `#[target_feature]` was
+                        // only permitted on safe functions because on most targets
                         // execution of instructions that are not supported is
                         // considered undefined behavior. For WebAssembly which is a
                         // 100% safe target at execution time it's not possible to
@@ -266,17 +265,10 @@ fn codegen_fn_attrs(tcx: TyCtxt<'_>, did: LocalDefId) -> CodegenFnAttrs {
                         // if a target is documenting some wasm-specific code then
                         // it's not spuriously denied.
                         //
-                        // This exception needs to be kept in sync with allowing
-                        // `#[target_feature]` on `main` and `start`.
-                    } else if !tcx.features().target_feature_11() {
-                        feature_err(
-                            &tcx.sess,
-                            sym::target_feature_11,
-                            attr.span,
-                            "`#[target_feature(..)]` can only be applied to `unsafe` functions",
-                        )
-                        .with_span_label(tcx.def_span(did), "not an `unsafe` function")
-                        .emit();
+                        // Now that `#[target_feature]` is permitted on safe functions,
+                        // this exception must still exist for allowing the attribute on
+                        // `main`, `start`, and other functions that are not usually
+                        // allowed.
                     } else {
                         check_target_feature_trait_unsafe(tcx, did, attr.span);
                     }
@@ -584,10 +576,7 @@ fn codegen_fn_attrs(tcx: TyCtxt<'_>, did: LocalDefId) -> CodegenFnAttrs {
     // its parent function, which effectively inherits the features anyway. Boxing this closure
     // would result in this closure being compiled without the inherited target features, but this
     // is probably a poor usage of `#[inline(always)]` and easily avoided by not using the attribute.
-    if tcx.features().target_feature_11()
-        && tcx.is_closure_like(did.to_def_id())
-        && codegen_fn_attrs.inline != InlineAttr::Always
-    {
+    if tcx.is_closure_like(did.to_def_id()) && codegen_fn_attrs.inline != InlineAttr::Always {
         let owner_id = tcx.parent(did.to_def_id());
         if tcx.def_kind(owner_id).has_codegen_attrs() {
             codegen_fn_attrs
diff --git a/compiler/rustc_feature/src/accepted.rs b/compiler/rustc_feature/src/accepted.rs
index 53362cb252988..87f15680b4d87 100644
--- a/compiler/rustc_feature/src/accepted.rs
+++ b/compiler/rustc_feature/src/accepted.rs
@@ -385,6 +385,8 @@ declare_features! (
     (accepted, struct_variant, "1.0.0", None),
     /// Allows `#[target_feature(...)]`.
     (accepted, target_feature, "1.27.0", None),
+    /// Allows the use of `#[target_feature]` on safe functions.
+    (accepted, target_feature_11, "CURRENT_RUSTC_VERSION", Some(69098)),
     /// Allows `fn main()` with return types which implements `Termination` (RFC 1937).
     (accepted, termination_trait, "1.26.0", Some(43301)),
     /// Allows `#[test]` functions where the return type implements `Termination` (RFC 1937).
diff --git a/compiler/rustc_feature/src/unstable.rs b/compiler/rustc_feature/src/unstable.rs
index bf26b5d25d2ba..c3fc234817126 100644
--- a/compiler/rustc_feature/src/unstable.rs
+++ b/compiler/rustc_feature/src/unstable.rs
@@ -610,8 +610,6 @@ declare_features! (
     (unstable, strict_provenance_lints, "1.61.0", Some(130351)),
     /// Allows string patterns to dereference values to match them.
     (unstable, string_deref_patterns, "1.67.0", Some(87121)),
-    /// Allows the use of `#[target_feature]` on safe functions.
-    (unstable, target_feature_11, "1.45.0", Some(69098)),
     /// Allows using `#[thread_local]` on `static` items.
     (unstable, thread_local, "1.0.0", Some(29594)),
     /// Allows defining `trait X = A + B;` alias items.
diff --git a/library/core/src/lib.rs b/library/core/src/lib.rs
index fde6887c5abae..024dbf91294ac 100644
--- a/library/core/src/lib.rs
+++ b/library/core/src/lib.rs
@@ -187,7 +187,6 @@
 #![feature(staged_api)]
 #![feature(stmt_expr_attributes)]
 #![feature(strict_provenance_lints)]
-#![feature(target_feature_11)]
 #![feature(trait_alias)]
 #![feature(transparent_unions)]
 #![feature(try_blocks)]
diff --git a/tests/assembly/closure-inherit-target-feature.rs b/tests/assembly/closure-inherit-target-feature.rs
index 4692653d91fc6..b629d8769edf2 100644
--- a/tests/assembly/closure-inherit-target-feature.rs
+++ b/tests/assembly/closure-inherit-target-feature.rs
@@ -4,7 +4,6 @@
 // make sure the feature is not enabled at compile-time
 //@ compile-flags: -C opt-level=3 -C target-feature=-sse4.1 -C llvm-args=-x86-asm-syntax=intel
 
-#![feature(target_feature_11)]
 #![crate_type = "rlib"]
 
 use std::arch::x86_64::{__m128, _mm_blend_ps};
diff --git a/tests/codegen/target-feature-inline-closure.rs b/tests/codegen/target-feature-inline-closure.rs
index d973bd93e3166..73bdbc0e1a841 100644
--- a/tests/codegen/target-feature-inline-closure.rs
+++ b/tests/codegen/target-feature-inline-closure.rs
@@ -3,7 +3,6 @@
 //@ compile-flags: -Copt-level=3 -Ctarget-cpu=x86-64
 
 #![crate_type = "lib"]
-#![feature(target_feature_11)]
 
 #[cfg(target_arch = "x86_64")]
 use std::arch::x86_64::*;
diff --git a/tests/mir-opt/inline/inline_compatibility.rs b/tests/mir-opt/inline/inline_compatibility.rs
index 13f28aaacd6a7..1bb102ccda58a 100644
--- a/tests/mir-opt/inline/inline_compatibility.rs
+++ b/tests/mir-opt/inline/inline_compatibility.rs
@@ -4,7 +4,6 @@
 
 #![crate_type = "lib"]
 #![feature(no_sanitize)]
-#![feature(target_feature_11)]
 #![feature(c_variadic)]
 
 #[inline]
diff --git a/tests/ui/asm/x86_64/issue-89875.rs b/tests/ui/asm/x86_64/issue-89875.rs
index af940f05fead7..0252859cff0a2 100644
--- a/tests/ui/asm/x86_64/issue-89875.rs
+++ b/tests/ui/asm/x86_64/issue-89875.rs
@@ -2,8 +2,6 @@
 //@ needs-asm-support
 //@ only-x86_64
 
-#![feature(target_feature_11)]
-
 use std::arch::asm;
 
 #[target_feature(enable = "avx")]
diff --git a/tests/ui/async-await/async-closures/fn-exception-target-features.rs b/tests/ui/async-await/async-closures/fn-exception-target-features.rs
index eb554650b7c9f..af6b884f6b3a1 100644
--- a/tests/ui/async-await/async-closures/fn-exception-target-features.rs
+++ b/tests/ui/async-await/async-closures/fn-exception-target-features.rs
@@ -1,14 +1,15 @@
 //@ edition: 2021
 //@ only-x86_64
 
-#![feature(async_closure, target_feature_11)]
-// `target_feature_11` just to test safe functions w/ target features.
+#![feature(async_closure)]
 
-use std::pin::Pin;
 use std::future::Future;
+use std::pin::Pin;
 
 #[target_feature(enable = "sse2")]
-fn target_feature()  -> Pin<Box<dyn Future<Output = ()> + 'static>> { todo!() }
+fn target_feature() -> Pin<Box<dyn Future<Output = ()> + 'static>> {
+    todo!()
+}
 
 fn test(f: impl AsyncFn()) {}
 
diff --git a/tests/ui/async-await/async-closures/fn-exception-target-features.stderr b/tests/ui/async-await/async-closures/fn-exception-target-features.stderr
index db5895108bb0e..86d1ad7c448f4 100644
--- a/tests/ui/async-await/async-closures/fn-exception-target-features.stderr
+++ b/tests/ui/async-await/async-closures/fn-exception-target-features.stderr
@@ -1,5 +1,5 @@
 error[E0277]: the trait bound `fn() -> Pin<Box<(dyn Future<Output = ()> + 'static)>> {target_feature}: AsyncFn()` is not satisfied
-  --> $DIR/fn-exception-target-features.rs:16:10
+  --> $DIR/fn-exception-target-features.rs:17:10
    |
 LL |     test(target_feature);
    |     ---- ^^^^^^^^^^^^^^ the trait `AsyncFn()` is not implemented for fn item `fn() -> Pin<Box<(dyn Future<Output = ()> + 'static)>> {target_feature}`
@@ -7,7 +7,7 @@ LL |     test(target_feature);
    |     required by a bound introduced by this call
    |
 note: required by a bound in `test`
-  --> $DIR/fn-exception-target-features.rs:13:17
+  --> $DIR/fn-exception-target-features.rs:14:17
    |
 LL | fn test(f: impl AsyncFn()) {}
    |                 ^^^^^^^^^ required by this bound in `test`
diff --git a/tests/ui/lang-items/start_lang_item_with_target_feature.rs b/tests/ui/lang-items/start_lang_item_with_target_feature.rs
index eb712ba409259..18cd4c9704056 100644
--- a/tests/ui/lang-items/start_lang_item_with_target_feature.rs
+++ b/tests/ui/lang-items/start_lang_item_with_target_feature.rs
@@ -1,7 +1,7 @@
 //@ only-x86_64
 //@ check-fail
 
-#![feature(lang_items, no_core, target_feature_11)]
+#![feature(lang_items, no_core)]
 #![no_core]
 
 #[lang = "copy"]
diff --git a/tests/ui/panic-handler/panic-handler-with-target-feature.rs b/tests/ui/panic-handler/panic-handler-with-target-feature.rs
index 8d5ea0703afa5..aec00c637bedb 100644
--- a/tests/ui/panic-handler/panic-handler-with-target-feature.rs
+++ b/tests/ui/panic-handler/panic-handler-with-target-feature.rs
@@ -1,7 +1,6 @@
 //@ compile-flags:-C panic=abort
 //@ only-x86_64
 
-#![feature(target_feature_11)]
 #![no_std]
 #![no_main]
 
diff --git a/tests/ui/panic-handler/panic-handler-with-target-feature.stderr b/tests/ui/panic-handler/panic-handler-with-target-feature.stderr
index cb17da3a4efbe..ddf0ae77a0a1a 100644
--- a/tests/ui/panic-handler/panic-handler-with-target-feature.stderr
+++ b/tests/ui/panic-handler/panic-handler-with-target-feature.stderr
@@ -1,5 +1,5 @@
 error: `#[panic_handler]` function is not allowed to have `#[target_feature]`
-  --> $DIR/panic-handler-with-target-feature.rs:11:1
+  --> $DIR/panic-handler-with-target-feature.rs:10:1
    |
 LL | #[target_feature(enable = "avx2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/check-pass.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/check-pass.rs
index 674cf930c0a6a..9279e7a955ed8 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/check-pass.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/check-pass.rs
@@ -9,8 +9,6 @@
 //@ check-pass
 //@ only-x86_64
 
-#![feature(target_feature_11)]
-
 #[target_feature(enable = "sse2")]
 const fn sse2() {}
 
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/closures-inherit-target_feature.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/closures-inherit-target_feature.rs
index 122ef542e7d63..aecea6314d412 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/closures-inherit-target_feature.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/closures-inherit-target_feature.rs
@@ -3,8 +3,6 @@
 //@ check-pass
 //@ only-x86_64
 
-#![feature(target_feature_11)]
-
 #[target_feature(enable = "avx")]
 fn also_use_avx() {
     println!("Hello from AVX")
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/feature-gate-target_feature_11.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/feature-gate-target_feature_11.rs
deleted file mode 100644
index 2add6b2e18653..0000000000000
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/feature-gate-target_feature_11.rs
+++ /dev/null
@@ -1,6 +0,0 @@
-//@ only-x86_64
-
-#[target_feature(enable = "sse2")] //~ ERROR can only be applied to `unsafe` functions
-fn foo() {}
-
-fn main() {}
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/feature-gate-target_feature_11.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/feature-gate-target_feature_11.stderr
deleted file mode 100644
index 4f1994d56fd42..0000000000000
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/feature-gate-target_feature_11.stderr
+++ /dev/null
@@ -1,15 +0,0 @@
-error[E0658]: `#[target_feature(..)]` can only be applied to `unsafe` functions
-  --> $DIR/feature-gate-target_feature_11.rs:3:1
-   |
-LL | #[target_feature(enable = "sse2")]
-   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-LL | fn foo() {}
-   | -------- not an `unsafe` function
-   |
-   = note: see issue #69098 <https://github.com/rust-lang/rust/issues/69098> for more information
-   = help: add `#![feature(target_feature_11)]` to the crate attributes to enable
-   = note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
-
-error: aborting due to 1 previous error
-
-For more information about this error, try `rustc --explain E0658`.
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.rs
index 364b4d3581276..03a80f51502a5 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.rs
@@ -1,7 +1,5 @@
 //@ only-x86_64
 
-#![feature(target_feature_11)]
-
 #[target_feature(enable = "sse2")]
 fn foo() {}
 
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.stderr
index cc941be5479e3..ba4a627ebc8d6 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.stderr
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.stderr
@@ -1,5 +1,5 @@
 error[E0308]: mismatched types
-  --> $DIR/fn-ptr.rs:9:21
+  --> $DIR/fn-ptr.rs:7:21
    |
 LL | #[target_feature(enable = "sse2")]
    | ---------------------------------- `#[target_feature]` added here
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.thir.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.thir.stderr
new file mode 100644
index 0000000000000..8d6ff6b927f1c
--- /dev/null
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.thir.stderr
@@ -0,0 +1,23 @@
+error[E0308]: mismatched types
+  --> $DIR/fn-ptr.rs:9:21
+   |
+LL | #[target_feature(enable = "sse2")]
+   | ---------------------------------- `#[target_feature]` added here
+...
+LL |     let foo: fn() = foo;
+   |              ----   ^^^ cannot coerce functions with `#[target_feature]` to safe function pointers
+   |              |
+   |              expected due to this
+   |
+   = note: expected fn pointer `fn()`
+                 found fn item `fn() {foo}`
+   = note: fn items are distinct from fn pointers
+   = note: functions with `#[target_feature]` can only be coerced to `unsafe` function pointers
+help: consider casting to a fn pointer
+   |
+LL |     let foo: fn() = foo as fn();
+   |                     ~~~~~~~~~~~
+
+error: aborting due to previous error
+
+For more information about this error, try `rustc --explain E0308`.
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.rs
index 3c370a1b8f321..6231989491c91 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.rs
@@ -1,7 +1,5 @@
 //@ only-x86_64
 
-#![feature(target_feature_11)]
-
 #[target_feature(enable = "avx")]
 fn foo() {}
 
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.stderr
index 4c07f4d6b990d..3e13afed2a36a 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.stderr
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.stderr
@@ -1,5 +1,5 @@
 error[E0277]: expected a `Fn()` closure, found `fn() {foo}`
-  --> $DIR/fn-traits.rs:24:10
+  --> $DIR/fn-traits.rs:22:10
    |
 LL |     call(foo);
    |     ---- ^^^ expected an `Fn()` closure, found `fn() {foo}`
@@ -10,13 +10,13 @@ LL |     call(foo);
    = note: wrap the `fn() {foo}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call`
-  --> $DIR/fn-traits.rs:11:17
+  --> $DIR/fn-traits.rs:9:17
    |
 LL | fn call(f: impl Fn()) {
    |                 ^^^^ required by this bound in `call`
 
 error[E0277]: expected a `FnMut()` closure, found `fn() {foo}`
-  --> $DIR/fn-traits.rs:25:14
+  --> $DIR/fn-traits.rs:23:14
    |
 LL |     call_mut(foo);
    |     -------- ^^^ expected an `FnMut()` closure, found `fn() {foo}`
@@ -27,13 +27,13 @@ LL |     call_mut(foo);
    = note: wrap the `fn() {foo}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call_mut`
-  --> $DIR/fn-traits.rs:15:25
+  --> $DIR/fn-traits.rs:13:25
    |
 LL | fn call_mut(mut f: impl FnMut()) {
    |                         ^^^^^^^ required by this bound in `call_mut`
 
 error[E0277]: expected a `FnOnce()` closure, found `fn() {foo}`
-  --> $DIR/fn-traits.rs:26:15
+  --> $DIR/fn-traits.rs:24:15
    |
 LL |     call_once(foo);
    |     --------- ^^^ expected an `FnOnce()` closure, found `fn() {foo}`
@@ -44,13 +44,13 @@ LL |     call_once(foo);
    = note: wrap the `fn() {foo}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call_once`
-  --> $DIR/fn-traits.rs:19:22
+  --> $DIR/fn-traits.rs:17:22
    |
 LL | fn call_once(f: impl FnOnce()) {
    |                      ^^^^^^^^ required by this bound in `call_once`
 
 error[E0277]: expected a `Fn()` closure, found `unsafe fn() {foo_unsafe}`
-  --> $DIR/fn-traits.rs:28:10
+  --> $DIR/fn-traits.rs:26:10
    |
 LL |     call(foo_unsafe);
    |     ---- ^^^^^^^^^^ call the function in a closure: `|| unsafe { /* code */ }`
@@ -62,13 +62,13 @@ LL |     call(foo_unsafe);
    = note: wrap the `unsafe fn() {foo_unsafe}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call`
-  --> $DIR/fn-traits.rs:11:17
+  --> $DIR/fn-traits.rs:9:17
    |
 LL | fn call(f: impl Fn()) {
    |                 ^^^^ required by this bound in `call`
 
 error[E0277]: expected a `FnMut()` closure, found `unsafe fn() {foo_unsafe}`
-  --> $DIR/fn-traits.rs:30:14
+  --> $DIR/fn-traits.rs:28:14
    |
 LL |     call_mut(foo_unsafe);
    |     -------- ^^^^^^^^^^ call the function in a closure: `|| unsafe { /* code */ }`
@@ -80,13 +80,13 @@ LL |     call_mut(foo_unsafe);
    = note: wrap the `unsafe fn() {foo_unsafe}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call_mut`
-  --> $DIR/fn-traits.rs:15:25
+  --> $DIR/fn-traits.rs:13:25
    |
 LL | fn call_mut(mut f: impl FnMut()) {
    |                         ^^^^^^^ required by this bound in `call_mut`
 
 error[E0277]: expected a `FnOnce()` closure, found `unsafe fn() {foo_unsafe}`
-  --> $DIR/fn-traits.rs:32:15
+  --> $DIR/fn-traits.rs:30:15
    |
 LL |     call_once(foo_unsafe);
    |     --------- ^^^^^^^^^^ call the function in a closure: `|| unsafe { /* code */ }`
@@ -98,7 +98,7 @@ LL |     call_once(foo_unsafe);
    = note: wrap the `unsafe fn() {foo_unsafe}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call_once`
-  --> $DIR/fn-traits.rs:19:22
+  --> $DIR/fn-traits.rs:17:22
    |
 LL | fn call_once(f: impl FnOnce()) {
    |                      ^^^^^^^^ required by this bound in `call_once`
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-main.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-main.rs
index a1c118478677b..6df89ee97ddf8 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-main.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-main.rs
@@ -1,7 +1,5 @@
 //@ only-x86_64
 
-#![feature(target_feature_11)]
-
 #[target_feature(enable = "avx2")]
 fn main() {}
 //~^ ERROR `main` function is not allowed to have `#[target_feature]`
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-main.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-main.stderr
index 57ad1cc8d0802..15f99512f1747 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-main.stderr
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-main.stderr
@@ -1,5 +1,5 @@
 error: `main` function is not allowed to have `#[target_feature]`
-  --> $DIR/issue-108645-target-feature-on-main.rs:6:1
+  --> $DIR/issue-108645-target-feature-on-main.rs:4:1
    |
 LL | fn main() {}
    | ^^^^^^^^^ `main` function is not allowed to have `#[target_feature]`
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-start.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-start.rs
index 6aa8f6fd821ed..beaa77700e490 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-start.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-start.rs
@@ -1,7 +1,6 @@
 //@ only-x86_64
 
 #![feature(start)]
-#![feature(target_feature_11)]
 
 #[start]
 #[target_feature(enable = "avx2")]
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-start.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-start.stderr
index d0a67c4f6a8d0..645b225ccced7 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-start.stderr
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108645-target-feature-on-start.stderr
@@ -1,5 +1,5 @@
 error: `#[start]` function is not allowed to have `#[target_feature]`
-  --> $DIR/issue-108645-target-feature-on-start.rs:7:1
+  --> $DIR/issue-108645-target-feature-on-start.rs:6:1
    |
 LL | #[target_feature(enable = "avx2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108655-inline-always-closure.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108655-inline-always-closure.rs
index 6bd810b0956d8..bf6dba6702c9e 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108655-inline-always-closure.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-108655-inline-always-closure.rs
@@ -3,8 +3,6 @@
 //@ check-pass
 //@ only-x86_64
 
-#![feature(target_feature_11)]
-
 #[target_feature(enable = "avx")]
 pub unsafe fn test() {
     ({
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-99876.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-99876.rs
index 57dac2e4adb76..141d07876d4ca 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/issue-99876.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/issue-99876.rs
@@ -1,7 +1,5 @@
 //@ check-pass
 
-#![feature(target_feature_11)]
-
 struct S<T>(T)
 where
     [T; (|| {}, 1).1]: Copy;
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.mir.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.mir.stderr
new file mode 100644
index 0000000000000..76b99dca84278
--- /dev/null
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.mir.stderr
@@ -0,0 +1,83 @@
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:21:5
+   |
+LL |     sse2();
+   |     ^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:24:5
+   |
+LL |     avx_bmi2();
+   |     ^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:27:5
+   |
+LL |     Quux.avx_bmi2();
+   |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:34:5
+   |
+LL |     avx_bmi2();
+   |     ^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:37:5
+   |
+LL |     Quux.avx_bmi2();
+   |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:44:5
+   |
+LL |     sse2();
+   |     ^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:47:5
+   |
+LL |     avx_bmi2();
+   |     ^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:50:5
+   |
+LL |     Quux.avx_bmi2();
+   |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:58:5
+   |
+LL |     sse2();
+   |     ^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:63:18
+   |
+LL | const name: () = sse2();
+   |                  ^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error: aborting due to 10 previous errors
+
+For more information about this error, try `rustc --explain E0133`.
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.rs
index fec4e75290fc8..35bf6c110115e 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.rs
@@ -2,8 +2,6 @@
 // Set the base cpu explicitly, in case the default has been changed.
 //@ compile-flags: -C target-cpu=x86-64
 
-#![feature(target_feature_11)]
-
 #[target_feature(enable = "sse2")]
 const fn sse2() {}
 
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.stderr
index 1ddf05b40a606..020cda539d620 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.stderr
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.stderr
@@ -1,5 +1,5 @@
 error[E0133]: call to function `sse2` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:27:5
+  --> $DIR/safe-calls.rs:25:5
    |
 LL |     sse2();
    |     ^^^^^^ call to function with `#[target_feature]`
@@ -8,7 +8,7 @@ LL |     sse2();
    = note: the sse2 target feature being enabled in the build configuration does not remove the requirement to list it in `#[target_feature]`
 
 error[E0133]: call to function `avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:29:5
+  --> $DIR/safe-calls.rs:27:5
    |
 LL |     avx_bmi2();
    |     ^^^^^^^^^^ call to function with `#[target_feature]`
@@ -16,7 +16,7 @@ LL |     avx_bmi2();
    = help: in order for the call to be safe, the context requires the following additional target features: avx and bmi2
 
 error[E0133]: call to function `Quux::avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:31:5
+  --> $DIR/safe-calls.rs:29:5
    |
 LL |     Quux.avx_bmi2();
    |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
@@ -24,7 +24,7 @@ LL |     Quux.avx_bmi2();
    = help: in order for the call to be safe, the context requires the following additional target features: avx and bmi2
 
 error[E0133]: call to function `avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:38:5
+  --> $DIR/safe-calls.rs:36:5
    |
 LL |     avx_bmi2();
    |     ^^^^^^^^^^ call to function with `#[target_feature]`
@@ -32,7 +32,7 @@ LL |     avx_bmi2();
    = help: in order for the call to be safe, the context requires the following additional target features: avx and bmi2
 
 error[E0133]: call to function `Quux::avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:40:5
+  --> $DIR/safe-calls.rs:38:5
    |
 LL |     Quux.avx_bmi2();
    |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
@@ -40,7 +40,7 @@ LL |     Quux.avx_bmi2();
    = help: in order for the call to be safe, the context requires the following additional target features: avx and bmi2
 
 error[E0133]: call to function `avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:47:5
+  --> $DIR/safe-calls.rs:45:5
    |
 LL |     avx_bmi2();
    |     ^^^^^^^^^^ call to function with `#[target_feature]`
@@ -48,7 +48,7 @@ LL |     avx_bmi2();
    = help: in order for the call to be safe, the context requires the following additional target feature: bmi2
 
 error[E0133]: call to function `Quux::avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:49:5
+  --> $DIR/safe-calls.rs:47:5
    |
 LL |     Quux.avx_bmi2();
    |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
@@ -56,7 +56,7 @@ LL |     Quux.avx_bmi2();
    = help: in order for the call to be safe, the context requires the following additional target feature: bmi2
 
 error[E0133]: call to function `sse2` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:61:15
+  --> $DIR/safe-calls.rs:59:15
    |
 LL | const _: () = sse2();
    |               ^^^^^^ call to function with `#[target_feature]`
@@ -65,7 +65,7 @@ LL | const _: () = sse2();
    = note: the sse2 target feature being enabled in the build configuration does not remove the requirement to list it in `#[target_feature]`
 
 error[E0133]: call to function `sse2_and_fxsr` with `#[target_feature]` is unsafe and requires unsafe function or block
-  --> $DIR/safe-calls.rs:64:15
+  --> $DIR/safe-calls.rs:62:15
    |
 LL | const _: () = sse2_and_fxsr();
    |               ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
@@ -74,7 +74,7 @@ LL | const _: () = sse2_and_fxsr();
    = note: the fxsr and sse2 target features being enabled in the build configuration does not remove the requirement to list them in `#[target_feature]`
 
 error[E0133]: call to function `sse2` with `#[target_feature]` is unsafe and requires unsafe block
-  --> $DIR/safe-calls.rs:69:5
+  --> $DIR/safe-calls.rs:67:5
    |
 LL |     sse2();
    |     ^^^^^^ call to function with `#[target_feature]`
@@ -83,12 +83,12 @@ LL |     sse2();
    = help: in order for the call to be safe, the context requires the following additional target feature: sse2
    = note: the sse2 target feature being enabled in the build configuration does not remove the requirement to list it in `#[target_feature]`
 note: an unsafe function restricts its caller, but its body is safe by default
-  --> $DIR/safe-calls.rs:68:1
+  --> $DIR/safe-calls.rs:66:1
    |
 LL | unsafe fn needs_unsafe_block() {
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 note: the lint level is defined here
-  --> $DIR/safe-calls.rs:67:8
+  --> $DIR/safe-calls.rs:65:8
    |
 LL | #[deny(unsafe_op_in_unsafe_fn)]
    |        ^^^^^^^^^^^^^^^^^^^^^^
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.thir.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.thir.stderr
new file mode 100644
index 0000000000000..daca221fe5dff
--- /dev/null
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/safe-calls.thir.stderr
@@ -0,0 +1,83 @@
+error[E0133]: call to function `sse2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:21:5
+   |
+LL |     sse2();
+   |     ^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:24:5
+   |
+LL |     avx_bmi2();
+   |     ^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `Quux::avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:27:5
+   |
+LL |     Quux.avx_bmi2();
+   |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:34:5
+   |
+LL |     avx_bmi2();
+   |     ^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `Quux::avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:37:5
+   |
+LL |     Quux.avx_bmi2();
+   |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `sse2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:44:5
+   |
+LL |     sse2();
+   |     ^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:47:5
+   |
+LL |     avx_bmi2();
+   |     ^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `Quux::avx_bmi2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:50:5
+   |
+LL |     Quux.avx_bmi2();
+   |     ^^^^^^^^^^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `sse2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:58:5
+   |
+LL |     sse2();
+   |     ^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error[E0133]: call to function `sse2` with `#[target_feature]` is unsafe and requires unsafe function or block
+  --> $DIR/safe-calls.rs:63:18
+   |
+LL | const name: () = sse2();
+   |                  ^^^^^^ call to function with `#[target_feature]`
+   |
+   = note: can only be called if the required target features are available
+
+error: aborting due to 10 previous errors
+
+For more information about this error, try `rustc --explain E0133`.
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/trait-impl.rs b/tests/ui/rfcs/rfc-2396-target_feature-11/trait-impl.rs
index df575b0f6b636..43ea4ed93ca0b 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/trait-impl.rs
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/trait-impl.rs
@@ -1,7 +1,5 @@
 //@ only-x86_64
 
-#![feature(target_feature_11)]
-
 trait Foo {
     fn foo(&self);
     unsafe fn unsf_foo(&self);
diff --git a/tests/ui/rfcs/rfc-2396-target_feature-11/trait-impl.stderr b/tests/ui/rfcs/rfc-2396-target_feature-11/trait-impl.stderr
index 00efbb52f159b..48abacc17c7bd 100644
--- a/tests/ui/rfcs/rfc-2396-target_feature-11/trait-impl.stderr
+++ b/tests/ui/rfcs/rfc-2396-target_feature-11/trait-impl.stderr
@@ -1,5 +1,5 @@
 error: `#[target_feature(..)]` cannot be applied to safe trait method
-  --> $DIR/trait-impl.rs:13:5
+  --> $DIR/trait-impl.rs:11:5
    |
 LL |     #[target_feature(enable = "sse2")]
    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ cannot be applied to safe trait method
@@ -8,7 +8,7 @@ LL |     fn foo(&self) {}
    |     ------------- not an `unsafe` function
 
 error: `#[target_feature(..)]` cannot be applied to safe trait method
-  --> $DIR/trait-impl.rs:22:5
+  --> $DIR/trait-impl.rs:20:5
    |
 LL |     #[target_feature(enable = "sse2")]
    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ cannot be applied to safe trait method
diff --git a/tests/ui/simd-abi-checks.rs b/tests/ui/simd-abi-checks.rs
index c97767b27941e..3a344a1f5f8fb 100644
--- a/tests/ui/simd-abi-checks.rs
+++ b/tests/ui/simd-abi-checks.rs
@@ -4,7 +4,7 @@
 
 #![feature(avx512_target_feature)]
 #![feature(portable_simd)]
-#![feature(target_feature_11, simd_ffi)]
+#![feature(simd_ffi)]
 #![allow(improper_ctypes_definitions)]
 
 use std::arch::x86_64::*;
diff --git a/tests/ui/target-feature/implied-features.rs b/tests/ui/target-feature/implied-features.rs
index 4fdd843e6c289..d0b5dd3c3fb99 100644
--- a/tests/ui/target-feature/implied-features.rs
+++ b/tests/ui/target-feature/implied-features.rs
@@ -1,6 +1,5 @@
 //@ only-x86_64
 //@ build-pass
-#![feature(target_feature_11)]
 #![allow(dead_code)]
 
 #[target_feature(enable = "ssse3")]
diff --git a/tests/ui/target-feature/invalid-attribute.rs b/tests/ui/target-feature/invalid-attribute.rs
index 2f951c4a00a9e..ad54b96504027 100644
--- a/tests/ui/target-feature/invalid-attribute.rs
+++ b/tests/ui/target-feature/invalid-attribute.rs
@@ -28,13 +28,6 @@ extern "Rust" {}
 //~^ ERROR malformed `target_feature` attribute
 unsafe fn foo() {}
 
-#[target_feature(enable = "sse2")]
-//~^ ERROR `#[target_feature(..)]` can only be applied to `unsafe` functions
-//~| NOTE see issue #69098
-//~| NOTE: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
-fn bar() {}
-//~^ NOTE not an `unsafe` function
-
 #[target_feature(enable = "sse2")]
 //~^ ERROR attribute should be applied to a function
 mod another {}
@@ -58,7 +51,7 @@ enum Bar {}
 #[target_feature(enable = "sse2")]
 //~^ ERROR attribute should be applied to a function
 union Qux {
-//~^ NOTE not a function
+    //~^ NOTE not a function
     f1: u16,
     f2: u16,
 }
@@ -101,9 +94,8 @@ trait Quux {
 
 impl Quux for Foo {
     #[target_feature(enable = "sse2")]
-    //~^ ERROR `#[target_feature(..)]` can only be applied to `unsafe` functions
-    //~| NOTE see issue #69098
-    //~| NOTE: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
+    //~^ ERROR `#[target_feature(..)]` cannot be applied to safe trait method
+    //~| NOTE cannot be applied to safe trait method
     fn foo() {}
     //~^ NOTE not an `unsafe` function
 }
@@ -113,9 +105,8 @@ fn main() {
     //~^ ERROR attribute should be applied to a function
     unsafe {
         foo();
-        bar();
     }
-    //~^^^^ NOTE not a function
+    //~^^^ NOTE not a function
 
     #[target_feature(enable = "sse2")]
     //~^ ERROR attribute should be applied to a function
diff --git a/tests/ui/target-feature/invalid-attribute.stderr b/tests/ui/target-feature/invalid-attribute.stderr
index bf48911edec5f..31c5d7670d187 100644
--- a/tests/ui/target-feature/invalid-attribute.stderr
+++ b/tests/ui/target-feature/invalid-attribute.stderr
@@ -32,7 +32,7 @@ LL | extern "Rust" {}
    | ---------------- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:38:1
+  --> $DIR/invalid-attribute.rs:31:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -41,7 +41,7 @@ LL | mod another {}
    | -------------- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:43:1
+  --> $DIR/invalid-attribute.rs:36:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -50,7 +50,7 @@ LL | const FOO: usize = 7;
    | --------------------- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:48:1
+  --> $DIR/invalid-attribute.rs:41:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -59,7 +59,7 @@ LL | struct Foo;
    | ----------- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:53:1
+  --> $DIR/invalid-attribute.rs:46:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -68,7 +68,7 @@ LL | enum Bar {}
    | ----------- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:58:1
+  --> $DIR/invalid-attribute.rs:51:1
    |
 LL |   #[target_feature(enable = "sse2")]
    |   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -81,7 +81,7 @@ LL | | }
    | |_- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:66:1
+  --> $DIR/invalid-attribute.rs:59:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -90,7 +90,7 @@ LL | type Uwu = ();
    | -------------- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:71:1
+  --> $DIR/invalid-attribute.rs:64:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -99,7 +99,7 @@ LL | trait Baz {}
    | ------------ not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:81:1
+  --> $DIR/invalid-attribute.rs:74:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -108,7 +108,7 @@ LL | static A: () = ();
    | ------------------ not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:86:1
+  --> $DIR/invalid-attribute.rs:79:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -117,7 +117,7 @@ LL | impl Quux for u8 {}
    | ------------------- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:93:1
+  --> $DIR/invalid-attribute.rs:86:1
    |
 LL | #[target_feature(enable = "sse2")]
    | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -126,19 +126,18 @@ LL | impl Foo {}
    | ----------- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:112:5
+  --> $DIR/invalid-attribute.rs:104:5
    |
 LL |       #[target_feature(enable = "sse2")]
    |       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 LL |
 LL | /     unsafe {
 LL | |         foo();
-LL | |         bar();
 LL | |     }
    | |_____- not a function definition
 
 error: attribute should be applied to a function definition
-  --> $DIR/invalid-attribute.rs:120:5
+  --> $DIR/invalid-attribute.rs:111:5
    |
 LL |     #[target_feature(enable = "sse2")]
    |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -164,27 +163,14 @@ error: malformed `target_feature` attribute input
 LL | #[target_feature(disable = "baz")]
    |                  ^^^^^^^^^^^^^^^ help: must be of the form: `enable = ".."`
 
-error[E0658]: `#[target_feature(..)]` can only be applied to `unsafe` functions
-  --> $DIR/invalid-attribute.rs:31:1
-   |
-LL | #[target_feature(enable = "sse2")]
-   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-...
-LL | fn bar() {}
-   | -------- not an `unsafe` function
-   |
-   = note: see issue #69098 <https://github.com/rust-lang/rust/issues/69098> for more information
-   = help: add `#![feature(target_feature_11)]` to the crate attributes to enable
-   = note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
-
 error: cannot use `#[inline(always)]` with `#[target_feature]`
-  --> $DIR/invalid-attribute.rs:76:1
+  --> $DIR/invalid-attribute.rs:69:1
    |
 LL | #[inline(always)]
    | ^^^^^^^^^^^^^^^^^
 
 error[E0046]: not all trait items implemented, missing: `foo`
-  --> $DIR/invalid-attribute.rs:88:1
+  --> $DIR/invalid-attribute.rs:81:1
    |
 LL | impl Quux for u8 {}
    | ^^^^^^^^^^^^^^^^ missing `foo` in implementation
@@ -192,20 +178,15 @@ LL | impl Quux for u8 {}
 LL |     fn foo();
    |     --------- `foo` from trait
 
-error[E0658]: `#[target_feature(..)]` can only be applied to `unsafe` functions
-  --> $DIR/invalid-attribute.rs:103:5
+error: `#[target_feature(..)]` cannot be applied to safe trait method
+  --> $DIR/invalid-attribute.rs:96:5
    |
 LL |     #[target_feature(enable = "sse2")]
-   |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+   |     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ cannot be applied to safe trait method
 ...
 LL |     fn foo() {}
    |     -------- not an `unsafe` function
-   |
-   = note: see issue #69098 <https://github.com/rust-lang/rust/issues/69098> for more information
-   = help: add `#![feature(target_feature_11)]` to the crate attributes to enable
-   = note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
 
-error: aborting due to 23 previous errors
+error: aborting due to 22 previous errors
 
-Some errors have detailed explanations: E0046, E0658.
-For more information about an error, try `rustc --explain E0046`.
+For more information about this error, try `rustc --explain E0046`.