Skip to content

Latest commit

 

History

History
282 lines (206 loc) · 13 KB

usage.md

File metadata and controls

282 lines (206 loc) · 13 KB
Raw

nf-core/fastqcat: Usage

Table of contents

Introduction

Nextflow handles job submissions on SLURM or other environments, and supervises running the jobs. Thus the Nextflow process must run until the pipeline is finished. We recommend that you put the process running in the background through screen / tmux or similar tool. Alternatively you can run nextflow within a cluster job submitted your job scheduler.

It is recommended to limit the Nextflow Java virtual machines memory. We recommend adding the following line to your environment (typically in ~/.bashrc or ~./bash_profile):

NXF_OPTS='-Xms1g -Xmx4g'

Running the pipeline

The typical command for running the pipeline is as follows:

nextflow run nf-core/fastqcat --reads '*_R{1,2}.fastq.gz' -profile docker

This will launch the pipeline with the docker configuration profile. See below for more information about profiles.

Note that the pipeline will create the following files in your working directory:

work            # Directory containing the nextflow working files
results         # Finished results (configurable, see below)
.nextflow_log   # Log file from Nextflow
# Other nextflow hidden files, eg. history of pipeline runs and old logs.

Updating the pipeline

When you run the above command, Nextflow automatically pulls the pipeline code from GitHub and stores it as a cached version. When running the pipeline after this, it will always use the cached version if available - even if the pipeline has been updated since. To make sure that you're running the latest version of the pipeline, make sure that you regularly update the cached version of the pipeline:

nextflow pull nf-core/fastqcat

Reproducibility

It's a good idea to specify a pipeline version when running the pipeline on your data. This ensures that a specific version of the pipeline code and software are used when you run your pipeline. If you keep using the same tag, you'll be running the same version of the pipeline, even if there have been changes to the code since.

First, go to the nf-core/fastqcat releases page and find the latest version number - numeric only (eg. 1.3.1). Then specify this when running the pipeline with -r (one hyphen) - eg. -r 1.3.1.

This version number will be logged in reports when you run the pipeline, so that you'll know what you used when you look back in the future.

Main arguments

-profile

Use this parameter to choose a configuration profile. Profiles can give configuration presets for different compute environments. Note that multiple profiles can be loaded, for example: -profile docker - the order of arguments is important!

If -profile is not specified at all the pipeline will be run locally and expects all software to be installed and available on the PATH.

  • awsbatch
    • A generic configuration profile to be used with AWS Batch.
  • conda
    • A generic configuration profile to be used with conda
    • Pulls most software from Bioconda
  • docker
  • singularity
  • test
    • A profile with a complete configuration for automated testing
    • Includes links to test data so needs no other parameters

--reads

Use this to specify the location of your input FastQ files. For example:

--reads 'path/to/data/sample_*_{1,2}.fastq'

Please note the following requirements:

  1. The path must be enclosed in quotes
  2. The path must have at least one * wildcard character
  3. When using the pipeline with paired end data, the path must use {1,2} notation to specify read pairs.

If left unspecified, a default pattern is used: data/*{1,2}.fastq.gz

--singleEnd

By default, the pipeline expects paired-end data. If you have single-end data, you need to specify --singleEnd on the command line when you launch the pipeline. A normal glob pattern, enclosed in quotation marks, can then be used for --reads. For example:

--singleEnd --reads '*.fastq'

It is not possible to run a mixture of single-end and paired-end files in one run.

Reference genomes

The pipeline config files come bundled with paths to the illumina iGenomes reference index files. If running with docker or AWS, the configuration is set up to use the AWS-iGenomes resource.

--genome (using iGenomes)

There are 31 different species supported in the iGenomes references. To run the pipeline, you must specify which to use with the --genome flag.

You can find the keys to specify the genomes in the iGenomes config file. Common genomes that are supported are:

  • Human
    • --genome GRCh37
  • Mouse
    • --genome GRCm38
  • Drosophila
    • --genome BDGP6
  • S. cerevisiae
    • --genome 'R64-1-1'

There are numerous others - check the config file for more.

Note that you can use the same configuration setup to save sets of reference files for your own use, even if they are not part of the iGenomes resource. See the Nextflow documentation for instructions on where to save such a file.

The syntax for this reference configuration is as follows:

params {
  genomes {
    'GRCh37' {
      fasta   = '<path to the genome fasta file>' // Used if no star index given
    }
    // Any number of additional genomes, key is used with --genome
  }
}

--fasta

If you prefer, you can specify the full path to your reference genome when you run the pipeline:

--fasta '[path to Fasta reference]'

--igenomesIgnore

Do not load igenomes.config when running the pipeline. You may choose this option if you observe clashes between custom parameters and those supplied in igenomes.config.

Job resources

Automatic resubmission

Each step in the pipeline has a default set of requirements for number of CPUs, memory and time. For most of the steps in the pipeline, if the job exits with an error code of 143 (exceeded requested resources) it will automatically resubmit with higher requests (2 x original, then 3 x original). If it still fails after three times then the pipeline is stopped.

Custom resource requests

Wherever process-specific requirements are set in the pipeline, the default value can be changed by creating a custom config file. See the files hosted at nf-core/configs for examples.

If you are likely to be running nf-core pipelines regularly it may be a good idea to request that your custom config file is uploaded to the nf-core/configs git repository. Before you do this please can you test that the config file works with your pipeline of choice using the -c parameter (see definition below). You can then create a pull request to the nf-core/configs repository with the addition of your config file, associated documentation file (see examples in nf-core/configs/docs), and amending nfcore_custom.config to include your custom profile.

If you have any questions or issues please send us a message on Slack.

AWS Batch specific parameters

Running the pipeline on AWS Batch requires a couple of specific parameters to be set according to your AWS Batch configuration. Please use the -awsbatch profile and then specify all of the following parameters.

--awsqueue

The JobQueue that you intend to use on AWS Batch.

--awsregion

The AWS region to run your job in. Default is set to eu-west-1 but can be adjusted to your needs.

Please make sure to also set the -w/--work-dir and --outdir parameters to a S3 storage bucket of your choice - you'll get an error message notifying you if you didn't.

Other command line parameters

--outdir

The output directory where the results will be saved.

--email

Set this parameter to your e-mail address to get a summary e-mail with details of the run sent to you when the workflow exits. If set in your user config file (~/.nextflow/config) then you don't need to specify this on the command line for every run.

-name

Name for the pipeline run. If not specified, Nextflow will automatically generate a random mnemonic.

This is used in the MultiQC report (if not default) and in the summary HTML / e-mail (always).

NB: Single hyphen (core Nextflow option)

-resume

Specify this when restarting a pipeline. Nextflow will used cached results from any pipeline steps where the inputs are the same, continuing from where it got to previously.

You can also supply a run name to resume a specific run: -resume [run-name]. Use the nextflow log command to show previous run names.

NB: Single hyphen (core Nextflow option)

-c

Specify the path to a specific config file (this is a core NextFlow command).

NB: Single hyphen (core Nextflow option)

Note - you can use this to override pipeline defaults.

--custom_config_version

Provide git commit id for custom Institutional configs hosted at nf-core/configs. This was implemented for reproducibility purposes. Default is set to master.

## Download and use config file with following git commid id
--custom_config_version d52db660777c4bf36546ddb188ec530c3ada1b96

--custom_config_base

If you're running offline, nextflow will not be able to fetch the institutional config files from the internet. If you don't need them, then this is not a problem. If you do need them, you should download the files from the repo and tell nextflow where to find them with the custom_config_base option. For example:

## Download and unzip the config files
cd /path/to/my/configs
wget https://github.com/nf-core/configs/archive/master.zip
unzip master.zip

## Run the pipeline
cd /path/to/my/data
nextflow run /path/to/pipeline/ --custom_config_base /path/to/my/configs/configs-master/

Note that the nf-core/tools helper package has a download command to download all required pipeline files + singularity containers + institutional configs in one go for you, to make this process easier.

--max_memory

Use to set a top-limit for the default memory requirement for each process. Should be a string in the format integer-unit. eg. --max_memory '8.GB'

--max_time

Use to set a top-limit for the default time requirement for each process. Should be a string in the format integer-unit. eg. --max_time '2.h'

--max_cpus

Use to set a top-limit for the default CPU requirement for each process. Should be a string in the format integer-unit. eg. --max_cpus 1

--plaintext_email

Set to receive plain-text e-mails instead of HTML formatted.

--monochrome_logs

Set to disable colourful command line output and live life in monochrome.

--multiqc_config

Specify a path to a custom MultiQC configuration file.