improper rigging can be dangerous, and introduces serious risk to cast, crew, audience, everyone! know your Working Load Limits (WLL), know your Min. Breaking Weights (MBW), and know your safety margins. When in doubt, defer to an expert. these notes are NOT a substitute for proper training or experience
this page needs a little more organization
- Schedule 40 Steel 1.5" pipe weighs 2.4lbs per foot (on average)
- Swivel Cheeseboro (sched 40):
- Rigid 90º Cheeseboro (sched 40):
- ETC C-Clamp:
- MWB Mega Claw: 2lbs
- Mega Clamp: 0.85lbs
- MLBSE Mega Coupler w/ Eye Nut: 1.3lbs
- MLSB Mega Coupler Swivel: 2.2lbs
- ML9B Mega Coupler 90º Rigid: 2.2lbs
- MLB Mega Coupler: 1.14lbs
- MSCB Mega Slim Coupler: 0.65lbs
- SLCB Mega Slim Claw:
- Mega Claw: 1,100lbs
- Mega Clamp: 600lbs
- MLBSE Mega Coupler w/ Eye Nut: 1,100lbs
- MLSB Mega Coupler Swivel: 1,100lbs
- ML9B Mega Coupler 90º Rigid: 1,100lbs
- MLB Mega Coupler (1/2" and 3/8"): 1,100lbs
- MLB Mega Coupler (1/4"): 450lbs
- MSCB Mega Slim Coupler: 500lbs
- SLCB Mega Slim Claw: 600lbs
measurements are from the center of the pipe to the flat surface of the clamp that touched the yoke
- Mega-Claw: 3"
- Mega-Clamp: TBD
- Mega-Coupler w/ Eye Nut:
- ETC C-clamp: 5"
- Meyer MUB-X40 (masque custom): 11.5" (?? need to double check this)
- Meyer MUB-UPA (masque custom): TBD
- (Add notes here about building trapeze!)
- 1/16" 7x7
- Working Load Limit 5:1 (WLL): 96lbs
- Min. Breaking Load (MBL): 480lbs
- 1/8" 7x19
- Working Load Limit 5:1 (WLL): 400lbs
- Min. Breaking Load (MBL): 2000lbs
- 3/16" 7x19
- Working Load Limit 5:1 (WLL): 840lbs
- Min. Breaking Load (MBL): 4200lbs
- 1/4" 7x19
- Working Load Limit 5:1 (WLL): 1400lbs
- Min. Breaking Load (MBL): 7000lbs
- verlock junior 1/16"
- WLL: 60lbs
- verlock senior 1/8"
- WLL: 250lbs
- verlock jumbo 3/16"
- WLL: 425lbs
- verlock w/ eye nut
- WLLL 1000lbs
- 1/16" 3 ball glider
- WLL: 60lbs
- 1/8" 6 ball glider
- WLL: 250lbs
- 3/16" 6 ball glider
- WLL: 500lbs
- 1/4" 6 ball glider
- WLL: 1000lbs
measurements are from the top of the yoke (where the c-clamp or mega claw is affixed) to the center of rotation. some yokes have multiple bolt holes, and therefore multiple measurements
- UPQ vertical: 20.5"
- UPJ horizontal: 7.25"
- UPJ vertical: TBD
- UPA horizontal: TBD
- UPA vertical: 16.25"
- UP4-XP: 4 15/16", 4 15/16"
- MM4: 2.75", 3.5"
- JF60 horizontal: 4", 5", 6"
- Anchor AN-1000x: 3 5/8", 4 5/8", 5 5/8"
- Meyer MYA-UPA: 15.5"
there are several EAW yoke manufacturers. I didn't know which was which at the time of measuring, so I used "variants" to denote different yokes
- JF80 yoke, variant A: 10.25"
- JF80 yoke, variant B: 6.75", 5.75", 4.75"