Strange behavior on PV data but not sure where the problem occurs

[sstolk90]

I'm using this integration to read my Victron values into Home Assistant.
I'm using a Node-Red flow to insert the data into the Victron GX device to report the amount of solar of my complete system.

This is sometimes happening:

And the result is this in HA:

Not knowing where to start I'm posting this here but it can that this HACS solution is not doing anything wrong.

[sstolk90]

And this is haapinging almost every few days:

[sstolk90]

I will monitor in the next few days with edited code from Node-Red to exclude some settings and values.

[bierbuik]

I have the same issue here with one of my pv systems. I think its the lack of wifi coverage or no time enough to respond for the inverter. HA checks every 5s the Victron system. I will try to increase that value to see if that gives me less this stuff. Will let you know

[bierbuik]

I can confirm it is the latency of the response.
Problem is solved here by setting HA to check fewer.