Swagger Core Jersey 1.X Project Setup

This page contains the required information to add Swagger to your Jersey 1.X application.

You can find additional information at our main set up page.

You need to complete the three steps in order to set up your application with Swagger:

1. Adding the dependencies to your application
2. Hooking up Swagger-Core in your Application
3. Configure and Initialize Swagger

For your convenience there are two Jersey 1.X sample projects:

1. java-jaxrs which is based on the package scanning configuration.
2. java-jersey-spring which shows a project using Spring IoC.

Adding the dependencies to your application

Check the change log to see information about the latest version and the changes from previous versions.

Use the following maven dependency:

<dependency>
  <groupId>com.wordnik</groupId>
  <artifactId>swagger-jersey-jaxrs_2.10</artifactId>
  <version>1.3.10</version>
</dependency>

The swagger-jersey-jaxrs artifact pulls in a specific version of Jersey. Maven's dependency management should resolve the version properly if you use an newer version, however in some cases you may be required to manually exclude it.

Hooking up Swagger-Core in your Application

1. Using Jersey's container Servlet (with web.xml)
   1. Package scanning / Concrete class selection
   2. Using a custom Application subclass
2. Using Spring

Using Jersey's container Servlet (with web.xml)

You can set Jersey's ServletContainer as a servlet.

Package scanning / Concrete class selection

You can use <init-param/> to set which packages or classes Jersey should scan/load when it starts. This is where you'd define your own packages and/or classes.

To hook Swagger into your application, you need to add the some of Swagger's packages and classes.

A sample servlet definition:

    <servlet>
        <servlet-name>jersey</servlet-name>
        <servlet-class>com.sun.jersey.spi.container.servlet.ServletContainer</servlet-class>
        <init-param>
            <param-name>com.sun.jersey.config.property.packages</param-name>
            <param-value>
                com.wordnik.swagger.jaxrs.json,
		com.wordnik.swagger.jersey.listing,
                {your.application.packages}
            </param-value>
        </init-param>
    </servlet>

    <servlet-mapping>
        <servlet-name>jersey</servlet-name>
        <url-pattern>/api/*</url-pattern>
    </servlet-mapping>

A few things to note:

1. {your.application.packages} should be replaced by the package(s) of your application.
2. The mapping of the servlet depends on your own needs. The above is just an example.

Using a custom Application subclass

When using a custom Application subclass, you would need to add swagger-core's providers to the set up process. For example:

public class SampleApplication extends Application {
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> resources = new HashSet();

        //resources.add(FirstResource.class);
        //resources.add(SecondResource.class);
        //...

        resources.add(com.wordnik.swagger.jersey.listing.ApiListingResource.class);
        resources.add(com.wordnik.swagger.jersey.listing.JerseyApiDeclarationProvider.class);
        resources.add(com.wordnik.swagger.jersey.listing.ApiListingResourceJSON.class);
        resources.add(com.wordnik.swagger.jersey.listing.JerseyResourceListingProvider.class);

        return resources;
    }
}

The commented part is where you'd add your own application's resources and providers.

Using Spring

The following instruction are based on using Jersey's own servlet for Spring integration (the com.sun.jersey.spi.spring.container.servlet.SpringServlet servlet).

Swagger Core's classes are framework-agnostic and as such do contain Spring annotations and will not be picked by Spring's scanning feature.

As such, you need to add Swagger-Core's relevant classes manually to your application context configuration file:

    <bean id="apiListingResourceJSON" class="com.wordnik.swagger.jersey.listing.ApiListingResourceJSON"/>
    <bean id="apiDeclarationProvider" class="com.wordnik.swagger.jersey.listing.JerseyApiDeclarationProvider" scope="singleton"/>
    <bean id="resourceListingProvider" class="com.wordnik.swagger.jersey.listing.JerseyResourceListingProvider" scope="singleton"/>

When using Spring, you must add a BeanConfig bean to initialize Swagger.

Configure and Initialize Swagger

1. Using Swagger's Servlet in the web.xml
2. Using Swagger's BeanConfig
   1. Using a Servlet
   2. Using the Application class
   3. Using Spring's Bean Declaration

Using Swagger's Servlet in the web.xml

Swagger offers a simple Servlet that can be used to initialize it.

Add the following snippet to your web.xml:

    <servlet>
        <servlet-name>Jersey2Config</servlet-name>
        <servlet-class>com.wordnik.swagger.jersey.config.JerseyJaxrsConfig</servlet-class>
        <init-param>
            <param-name>api.version</param-name>
            <param-value>1.0.0</param-value>
        </init-param>
        <init-param>
            <param-name>swagger.api.basepath</param-name>
            <param-value>http://localhost:8080/api</param-value>
        </init-param>
        <load-on-startup>2</load-on-startup>
    </servlet>

A few things to note:

1. The api.version should reflect the version of your own API.
2. swagger.api.basepath should point to the context root of your API. This defers from server to server and how you configured your JAX-RS application.
3. There's no <servlet-mapping> for this servlet as it is only used for initialization and doesn't actually expose any interface.

Using Swagger's BeanConfig

Swagger's BeanConfig class allows you to set various properties for Swagger's initialization.

Method	Property Name	Purpose
setTitle(String)	title	Sets the title of the application.
setDescription(String)	description	Sets the description of the application.
setTermsOfServiceUrl(String)	termsOfServiceUrl	Sets the URL of the application's Terms of Service.
setContact(String)	contact	Sets the contact information for the application.
setLicense(String)	license	Sets the license of the application.
setLicenseUrl(String)	licenseUrl	Sets the licesne url of the application.
setVersion(String)	version	Sets the version of the API.
setBasePath(String)	basePath	Sets the basePath for the API calls.
setApiReader(String)	apiReader	Sets an API Reader class for Swagger.
setFilterClass(Sting)	filterClass	Sets a security filter for Swagger's documentation.
setResourcePackage(String)	resourcePackage	Sets which package(s) Swagger should scan to pick up resources. If there's more than one package, it can be a list of comma-separated packages.
setScan(boolean)	scan	When set to true, Swagger will build the documentation.

In order for the Swagger to operate properly, you must set the base path of the application.

In order for Swagger to actually produce the documentation, you must setScan(true).

The BeanConfig should be called when your application starts up. The two common use cases are either using a Servlet or the Application class if you're already using one. Otherwise, any other method you use at your application's initialization could work.

1. Using a Servlet
2. Using the Application class
3. Using Spring's Bean Declaration

Using a Servlet

A sample servlet would be:

package io.swagger.api.util;

import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;

public class Bootstrap extends HttpServlet {
    @Override
    public void init(ServletConfig config) throws ServletException {
        super.init(config);

        BeanConfig beanConfig = new BeanConfig();
        beanConfig.setVersion("1.0.2");
        beanConfig.setBasePath("http://localhost:8002/api");
        beanConfig.setResourcePackage("io.swagger.resources");
        beanConfig.setScan(true);
    }
}

And adding the following snippet to the web.xml will ensure the initialization of Swagger:

    <servlet>
        <servlet-name>SwaggerBootstrap</servlet-name>
        <servlet-class>io.swagger.api.util.Bootstrap</servlet-class>
        <load-on-startup>2</load-on-startup>
    </servlet>

There's no need for a URL mapping for this servlet as it is only used to initialize the application.

Using the Application class

If you're already using an Application class to configure your JAX-RS application, you can use its constructor to set up Swagger:

public class SampleApplication extends Application {

    public SampleApplication() {
        BeanConfig beanConfig = new BeanConfig();
        beanConfig.setVersion("1.0.2");
        beanConfig.setBasePath("http://localhost:8002/api");
        beanConfig.setResourcePackage("io.swagger.resources");
        beanConfig.setScan(true);
    }

    @Override
    public Set<Class<?>> getClasses() {
        // set your resources here
    }
}

Using Spring's Bean Declaration

When using Spring, you must include a BeanConfig bean declaration in your application context configuration file. When using Spring, Swagger-Core cannot pick up the resources automatically, so must set the value of the resourcePackage property to which packages need to be scanned by Swagger. You must also set the scan property to be true for the scanning to take place.

A sample declaration would be:

    <bean id="beanConfig" class="com.wordnik.swagger.jaxrs.config.BeanConfig">
        <property name="title" value="Swagger Sample App"/>
        <property name="version" value="1.0.0" />
        <property name="basePath" value="http://localhost:8002/api"/>
        <property name="resourcePackage" value="io.swagger.resources"/>
        <property name="scan" value="true"/>
    </bean>

You can use any of the properties available with to the BeanConfig to customize your Swagger configuration.