Skip to content

Latest commit

 

History

History
316 lines (215 loc) · 8.96 KB

INSTALL.md

File metadata and controls

316 lines (215 loc) · 8.96 KB
Raw

Installation

Table of contents

Prerequisites

Before starting, see Supported Architectures and check if your device's architecture is supported.

Fedora, RHEL, CentOS

NOTE: You'll need about 15GB of free disk space for the kpatch-build cache in ~/.kpatch and for ccache.

Install the dependencies for compiling kpatch and running kpatch-build:

# Will request root privileges
make dependencies

Oracle Linux 7

NOTE: You'll need about 15GB of free disk space for the kpatch-build cache in ~/.kpatch and for ccache.

Install the dependencies for compiling kpatch:

UNAME=$(uname -r)
sudo yum install gcc kernel-devel-${UNAME%.*} elfutils elfutils-devel

Install the dependencies for the "kpatch-build" command:

sudo yum install pesign yum-utils zlib-devel \
  binutils-devel newt-devel python-devel perl-ExtUtils-Embed \
  audit-libs numactl-devel pciutils-devel bison patchutils

# enable ol7_optional_latest repo
sudo yum-config-manager --enable ol7_optional_latest

sudo yum-builddep kernel-${UNAME%.*}

# manually install kernel debuginfo packages
rpm -ivh https://oss.oracle.com/ol7/debuginfo/kernel-debuginfo-$(uname -r).rpm
rpm -ivh https://oss.oracle.com/ol7/debuginfo/kernel-debuginfo-common-x86_64-$(uname -r).rpm

# optional, but highly recommended - enable EPEL 7
sudo yum install ccache
ccache --max-size=5G

Ubuntu

NOTE: You'll need about 15GB of free disk space for the kpatch-build cache in ~/.kpatch and for ccache.

Install the dependencies for compiling kpatch and running kpatch-build

# required on ppc64le
# e.g., on Ubuntu 18.04 for gcc-7.3
apt-get install gcc-7-plugin-dev

# Will request root privileges
make dependencies

Debian 9 (Stretch)

Since Stretch the stock kernel can be used without changes, however the version of kpatch in Stretch is too old so you still need to build it manually. Follow the instructions for Debian Jessie (next section) but skip building a custom kernel/rebooting.

Debian 8 (Jessie)

NOTE: You'll need about 15GB of free disk space for the kpatch-build cache in ~/.kpatch and for ccache.

Install the dependencies for compiling kpatch:

apt-get install make gcc libelf-dev build-essential

Install and prepare the kernel sources:

apt-get install linux-source-$(uname -r)
cd /usr/src && tar xvf linux-source-$(uname -r).tar.xz && ln -s linux-source-$(uname -r) linux && cd linux
cp /boot/config-$(uname -r) .config
for OPTION in CONFIG_KALLSYMS_ALL CONFIG_FUNCTION_TRACER ; do sed -i "s/# $OPTION is not set/$OPTION=y/g" .config ; done
sed -i "s/^SUBLEVEL.*/SUBLEVEL =/" Makefile
make -j`getconf _NPROCESSORS_CONF` deb-pkg KDEB_PKGVERSION=$(uname -r).9-1

Install the kernel packages and reboot

dpkg -i /usr/src/*.deb
reboot

Install the dependencies for the "kpatch-build" command:

apt-get install dpkg-dev
apt-get build-dep linux

# required on ppc64le
# e.g., on stretch for gcc-6.3
apt-get install gcc-6-plugin-dev

# optional, but highly recommended
apt-get install ccache
ccache --max-size=5G

Debian 7 (Lenny)

NOTE: You'll need about 15GB of free disk space for the kpatch-build cache in ~/.kpatch and for ccache.

Add backports repositories:

echo "deb http://http.debian.net/debian wheezy-backports main" > /etc/apt/sources.list.d/wheezy-backports.list
echo "deb http://packages.incloudus.com backports-incloudus main" > /etc/apt/sources.list.d/incloudus.list
wget http://packages.incloudus.com/incloudus/incloudus.pub -O- | apt-key add -
aptitude update

Install the linux kernel, symbols and gcc 4.9:

aptitude install -t wheezy-backports -y initramfs-tools
aptitude install -y gcc gcc-4.9 g++-4.9 linux-image-3.14 linux-image-3.14-dbg

Configure gcc 4.9 as the default gcc compiler:

update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.7 20
update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.9 50
update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.7 20
update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.9 50

Install kpatch and these dependencies:

aptitude install kpatch

Configure ccache (installed by kpatch package):

ccache --max-size=5G

Gentoo

NOTE: You'll need about 15GB of free disk space for the kpatch-build cache in ~/.kpatch and for ccache.

Install Kpatch and Kpatch dependencies:

emerge --ask sys-kernel/kpatch

Install ccache (optional):

emerge --ask dev-util/ccache

Configure ccache:

ccache --max-size=5G

OpenEuler

ATTENTION: openEuler maintains its own version of kpatch which work with its own kernel. You can check this link to see its documents. This document describes how to run mainline kpatch in openEuler.

NOTE: You'll need about 15GB of free disk space for the kpatch-build cache in ~/.kpatch and for ccache.

Install the dependencies for compiling kpatch and running kpatch-build:

# Will request root privileges
make dependencies

Before running kpatch-build, two more things need to be checked:

  1. Ensure current kernel compiled with CONFIG_LIVEPATCH_PER_TASK_CONSISTENCY set

    openEuler has two strategies to apply kernel live patches and it is decided at compile time.

    When CONFIG_LIVEPATCH_STOP_MACHINE_CONSISTENCY set, openEuler uses its own strategy.

    When CONFIG_LIVEPATCH_PER_TASK_CONSISTENCY set, openEuler uses the conventional strategy.

    Only one config option can take effect at the same time. A chinese blog written by the openEuler official describes their modifications for kernel livepatch. The main difference is CONFIG_LIVEPATCH_STOP_MACHINE_CONSISTENCY will disable the usage of ftrace handler in livepatch, they believe it will be faster.

    Check whether your current kernel compiled with CONFIG_LIVEPATCH_PER_TASK_CONSISTENCY

    grep "CONFIG_LIVEPATCH_PER_TASK_CONSISTENCY" /boot/config-$(uname -r)

    If you see any output, it means your kernel satisfies, you can go directly to check step 2.

    If not, then you need to recompile your current kernel with CONFIG_LIVEPATCH_PER_TASK_CONSISTENCY set.

    You can reference the following steps to recompile the kernel if needed

    1. download source code of the current kernel

      # set working directories
TEMPDIR=~/.tmp
mkdir -p $TEMPDIR
mkdir -p $TEMPDIR/buildroot

# download kernel source rpm package
yumdownloader --source --destdir "$TEMPDIR" kernel-$(uname -r)

# obtain source code from package
rpm -D "_topdir $TEMPDIR/buildroot" -ivh $TEMPDIR/kernel-*.src.rpm
rpmbuild -D "_topdir $TEMPDIR/buildroot" -bp --nodeps --target=$(uname -m) $TEMPDIR/buildroot/SPECS/kernel.spec

# check source code and copy config file
cd $TEMPDIR/buildroot/BUILD/kernel-*/linux-*[sS]ource
cp /boot/config-$(uname -r) .config

    2. set CONFIG_LIVEPATCH_PER_TASK_CONSISTENCY

      make menuconfig

      select order

       -> Processor type and features
     -> Enable Livepatch
         -> Kernel Live Patching
             -> live patching method

      choose

      based on ftrace

      After this step, you shoud see CONFIG_LIVEPATCH_PER_TASK_CONSISTENCY in .config file

    3. recompile kernel and install it to your running environment.

      Just to remind, after installing the recompiled kernel, the config file should also be updated.

  2. Ensure /update/source is in the rpm repo lists

    openEuler releases its source rpm package of the kernel in two places.

    One is /source and it is included in rpm repo lists by default.

    One is /update/source and it may not be included it in some release versions.

    grep "/update/source" /etc/yum.repos.d/openEuler.repo

    If you can't see any output, add it to the end of /etc/yum.repos.d/openEuler.repo

    For example, if you use openEuler 21.09, you will add something like:

    [update-source]
name=update-source
baseurl=https://repo.openeuler.org/openEuler-21.09/update/source/
enabled=1
gpgcheck=0

    baseurl is releated with your release version, be careful please!

    Goto openEuler repo, find your own suitable baseurl.

Build

Compile kpatch:

make

Install

OPTIONAL: Install kpatch to /usr/local:

sudo make install

Alternatively, the kpatch and kpatch-build scripts can be run directly from the git tree.