Manual, Release, Discussion, and Support zone for the SDB16 keyboard.
[Updated] Firmware/[email protected]
[Unchanged] Firmware/[email protected]
1. Go to Releases and download the corresponding firmware (The type is printed on the box);
2. Download and launch QMK Toolbox, and ensure that MCU is ATmega32u4. Then load the downloaded HEX file;
3. Connect the SDB16 keyboard, click RST button, and wait for QMK Toolbox to identify a DFU device;
4. Click Clear EEPROM to initialize the device;
5. Click Flash to complete flashing;
6. Re-connect your device and enjoy.
If the device does not behave as expected, please check the followings:
- The layout of the key caps is the same as what's printed on the box
- The flashed firmware is correct
- Clear EEPROM before flashing
- There's no errors when flashing
If you have problem connecting the device, please check the followings:
- The USB driver is installed
- The USB-C cable is capable of data transfers
- The cable and connectors are functional
About USB the USB drier: ATmega32u4/Arduino Leonardo, or any compatible.
Two ways of installing a driver:
- In QMK Toolbox, you can follow the prompt or manually click install driver
- Installing Arduino IDE will automatically solve driver problems
Please go to issues page to submit and discuss your questions.
If you need more technical support or help, feel free to contact us:
(If not personal/private, we would suggest using issues.)
CEO and Sales：NextB
Design and Materials：casteil
Hardware and Functions：wyw