Oxidized and issue with TP-Link devices

[GeComDohlad]

Hello guys,
I need help with getting config backups from TP-Link devices from our network. We're using TP-Link devices as TL-SG3428, TL-SG3210, TL-SG3210 and TP-Link JetStream T2500G-10TS 1.0.

Here is my Oxidized installation
root@nms:/home/gecom# oxidized -v
0.28.0

root@nms:/home/gecom# ruby -v
ruby 2.7.0p0 (2019-12-25 revision 647ee6f091) [x86_64-linux-gnu]

Here is my tplink.rb model

class TPLink < Oxidized::Model
  # tp-link prompt
  prompt  /^\r?([\w.@()-]+[#>]\s?)$/
  comment '! '

  def ssh
    @input.class.to_s.match(/SSH/)
  end

  # With disable paging this is not needed
  # # handle paging
  # # workaround for sometimes missing whitespaces with "\s?"
  expect /Press\s?any\s?key\s?to\s?continue\s?(Q\s?to\s?quit)/ do |data, re|
  send ' '
    data.sub re, ''
  end

  # send carriage return because \n with the command is not enough
  # checks if line ends with prompt >,#,: or \r,\n otherwise send \r
  expect /[^>#\r\n:]$/ do |data, re|
    send "\r" if ssh
    data.sub re, ''
  end

  cmd :all do |cfg|
    # # remove unwanted paging line
    cfg.gsub! /^Press any key to contin.*/, ''
    # normalize linefeeds
    cfg.gsub! /(\r|\r\n|\n\r)/, "\n"
    # remove redundant prompt lines
    cfg.gsub! /^([\w.@()-]+[#>])$/, ''
    # remove empty lines
    cfg.each_line.reject { |line| line.match /^[\r\n\s\u0000#]+$/ }.join
  end

  cmd :secret do |cfg|
    cfg.gsub! /^enable password (\S+)/, 'enable password '
    cfg.gsub! /^user (\S+) password (\S+) (.)/, 'user \1 password \3'
    cfg.gsub! /^(snmp-server community)./, '\1 '
    cfg.gsub! /secret (\d+) (\S+).*/, ''
    cfg
  end

  cmd "show system-info" do |cfg|
    cfg.gsub! /(System Time\s+-)./, '\1 '
    cfg.gsub! /(Running Time\s+-)./, '\1 '
    comment cfg.each_line.to_a[3..-3].join
  end

  cmd "show running-config" do |cfg|
    lines = cfg.each_line.to_a[1..-1]
    # cut config after "end"
    lines[0..lines.index("end\n")].join
  end

  cfg :telnet, :ssh do
    username /^(User ?[nN]ame|User):/
    password /^\r?[pP]assword:/
  end

  cfg :telnet, :ssh do
    post_login do
      if vars(:enable) == true
        cmd "enable"
      elsif vars(:enable)
        cmd "enable", /^[pP]assword:/
        send vars(:enable) + "\n\r"
      end
      # disable paging
      cmd "terminal length 0"
      # enable-admin gives admin privileges for regular users
      # Sending enable-admin with an admin user returns a message warning that
      # the user already is admin without further consequences. So, always
      # send the enable-admin.
      # There is an option to set a password for enable-admin, but testing
      # with firmware 2.0.5 Build 20200109 Rel.36203 that option didn't works.
      # So we'll leave enable-admin without password here.
      cmd "enable-admin"
    end

    pre_logout do
      send "exit\r"
      send "logout\r"
    end
  end
end

after detailed logs from oxidized i have success executing commands as show-info, show running-config atc. and fetched config are complete in the end of logs. But my output is still

--------^
Error:Bad command
switch>

any ideas ?
Thank you
TP

[robertcheramy]

Why do are you not using tplink model?