Turn Off connect button when another VPN becomes active

[AussieAbroad]

I installed this on my Google TV device yesterday. I run several VPNs because of the location I am in and because internet is unreliable.

1. When I activate WG Tunnel (have to click the tunnel link twice to get it to connect (once to select, once to activate) - Wireguard app only needs one click to select and connect).
2. When the tunnel is active the engaged button is shown to the right side in active position. When I activate another VPN app, it notifies me that VPN is disconnected and then notifies it is connected again on new app. The problem is that when I go back into WG Tunnel (after connecting to a different VPN app) the active button is still showing as ON in WG Tunnel, it should be showing off to the left in deactivated mode. The indicator light that shows it is not connected on left of screen is off, but the active button remains on. This should turn to off when another VPN app is engaged. It does not appear to interfere with the VPN connection on the new activated app, but it is confusing to show as being ON when you go back into WG tunnel

[zaneschepke]

Thanks for the report! I'll look into this.

[AussieAbroad]

Thanks and another small enhancement I would recommend for the TV version is to make the tunnel selection wording bigger (or allow it), I have about 6 tunnels and from a distance it is easy to read.