Combine PUSH0 and PC flags.

evm/src/cpu/columns/ops.rs

@@ -18,9 +18,7 @@ pub struct OpsColumnsView<T: Copy> {
     pub prover_input: T,
     pub pop: T,
     pub jumps: T, // Combines JUMP and JUMPI flags.
-    pub pc: T,
     pub jumpdest: T,
-    pub push0: T,
     pub push: T,
     pub dup: T,
     pub swap: T,
@@ -29,6 +27,7 @@ pub struct OpsColumnsView<T: Copy> {
     pub mload_32bytes: T,
     pub exit_kernel: T,
     pub m_op_general: T,
+    pub pc_push0: T, // Combines PC and PUSH0
 
     pub syscall: T,
     pub exception: T,

evm/src/cpu/control_flow.rs

@@ -8,7 +8,7 @@ use crate::constraint_consumer::{ConstraintConsumer, RecursiveConstraintConsumer
 use crate::cpu::columns::{CpuColumnsView, COL_MAP};
 use crate::cpu::kernel::aggregator::KERNEL;
 
-const NATIVE_INSTRUCTIONS: [usize; 17] = [
+const NATIVE_INSTRUCTIONS: [usize; 16] = [
     COL_MAP.op.binary_op,
     COL_MAP.op.ternary_op,
     COL_MAP.op.fp254_op,
@@ -21,9 +21,8 @@ const NATIVE_INSTRUCTIONS: [usize; 17] = [
     COL_MAP.op.pop,
     // not JUMP (need to jump)
     // not JUMPI (possible need to jump)
-    COL_MAP.op.pc,
+    COL_MAP.op.pc_push0,
     COL_MAP.op.jumpdest,
-    COL_MAP.op.push0,
     // not PUSH (need to increment by more than 1)
     COL_MAP.op.dup,
     COL_MAP.op.swap,

evm/src/cpu/decode.rs

@@ -23,7 +23,7 @@ use crate::cpu::columns::{CpuColumnsView, COL_MAP};
 /// behavior.
 /// Note: invalid opcodes are not represented here. _Any_ opcode is permitted to decode to
 /// `is_invalid`. The kernel then verifies that the opcode was _actually_ invalid.
-const OPCODES: [(u8, usize, bool, usize); 16] = [
+const OPCODES: [(u8, usize, bool, usize); 14] = [
     // (start index of block, number of top bits to check (log2), kernel-only, flag column)
     // ADD, MUL, SUB, DIV, MOD, LT, GT and BYTE flags are handled partly manually here, and partly through the Arithmetic table CTL.
     // ADDMOD, MULMOD and SUBMOD flags are handled partly manually here, and partly through the Arithmetic table CTL.
@@ -36,9 +36,7 @@ const OPCODES: [(u8, usize, bool, usize); 16] = [
     (0x49, 0, true, COL_MAP.op.prover_input),
     (0x50, 0, false, COL_MAP.op.pop),
     (0x56, 1, false, COL_MAP.op.jumps), // 0x56-0x57
-    (0x58, 0, false, COL_MAP.op.pc),
     (0x5b, 0, false, COL_MAP.op.jumpdest),
-    (0x5f, 0, false, COL_MAP.op.push0),
     (0x60, 5, false, COL_MAP.op.push), // 0x60-0x7f
     (0x80, 4, false, COL_MAP.op.dup),  // 0x80-0x8f
     (0x90, 4, false, COL_MAP.op.swap), // 0x90-0x9f
@@ -52,13 +50,14 @@ const OPCODES: [(u8, usize, bool, usize); 16] = [
 /// List of combined opcodes requiring a special handling.
 /// Each index in the list corresponds to an arbitrary combination
 /// of opcodes defined in evm/src/cpu/columns/ops.rs.
-const COMBINED_OPCODES: [usize; 6] = [
+const COMBINED_OPCODES: [usize; 7] = [
     COL_MAP.op.logic_op,
     COL_MAP.op.fp254_op,
     COL_MAP.op.binary_op,
     COL_MAP.op.ternary_op,
     COL_MAP.op.shift,
     COL_MAP.op.m_op_general,
+    COL_MAP.op.pc_push0,
 ];
 
 pub fn generate<F: RichField>(lv: &mut CpuColumnsView<F>) {
@@ -192,6 +191,12 @@ pub fn eval_packed_generic<P: PackedField>(
         * (opcode - P::Scalar::from_canonical_usize(0xfc_usize))
         * lv.op.m_op_general;
     yield_constr.constraint(m_op_constr);
+
+    // Manually check lv.op.pc_push0.
+    let pc_push0_constr = (opcode - P::Scalar::from_canonical_usize(0x58_usize))
+        * (opcode - P::Scalar::from_canonical_usize(0x5f_usize))
+        * lv.op.pc_push0;
+    yield_constr.constraint(pc_push0_constr);
 }
 
 pub fn eval_ext_circuit<F: RichField + Extendable<D>, const D: usize>(
@@ -294,4 +299,13 @@ pub fn eval_ext_circuit<F: RichField + Extendable<D>, const D: usize>(
     m_op_constr = builder.mul_extension(m_op_constr, lv.op.m_op_general);
 
     yield_constr.constraint(builder, m_op_constr);
+
+    // Manually check lv.op.pc_push0.
+    let pc_opcode = builder.constant_extension(F::Extension::from_canonical_usize(0x58_usize));
+    let push0_opcode = builder.constant_extension(F::Extension::from_canonical_usize(0x5f_usize));
+    let pc_constr = builder.sub_extension(opcode, pc_opcode);
+    let push0_constr = builder.sub_extension(opcode, push0_opcode);
+    let mut pc_push0_constr = builder.mul_extension(pc_constr, push0_constr);
+    pc_push0_constr = builder.mul_extension(pc_push0_constr, lv.op.pc_push0);
+    yield_constr.constraint(builder, pc_push0_constr);
 }

evm/src/cpu/gas.rs

@@ -30,9 +30,8 @@ const SIMPLE_OPCODES: OpsColumnsView<Option<u32>> = OpsColumnsView {
     prover_input: KERNEL_ONLY_INSTR,
     pop: G_BASE,
     jumps: None, // Combined flag handled separately.
-    pc: G_BASE,
+    pc_push0: G_BASE,
     jumpdest: G_JUMPDEST,
-    push0: G_BASE,
     push: G_VERYLOW,
     dup: G_VERYLOW,
     swap: G_VERYLOW,

evm/src/cpu/pc.rs

@@ -11,7 +11,8 @@ pub fn eval_packed<P: PackedField>(
     lv: &CpuColumnsView<P>,
     yield_constr: &mut ConstraintConsumer<P>,
 ) {
-    let filter = lv.op.pc;
+    // `PUSH0`'s opcode is odd, while `PC`'s opcode is even.
+    let filter = lv.op.pc_push0 * (P::ONES - lv.opcode_bits[0]);
     let push_value = lv.mem_channels[NUM_GP_CHANNELS - 1].value;
     yield_constr.constraint(filter * (push_value[0] - lv.program_counter));
     for &limb in &push_value[1..] {
@@ -24,7 +25,10 @@ pub fn eval_ext_circuit<F: RichField + Extendable<D>, const D: usize>(
     lv: &CpuColumnsView<ExtensionTarget<D>>,
     yield_constr: &mut RecursiveConstraintConsumer<F, D>,
 ) {
-    let filter = lv.op.pc;
+    // `PUSH0`'s opcode is odd, while `PC`'s opcode is even.
+    let one = builder.one_extension();
+    let mut filter = builder.sub_extension(one, lv.opcode_bits[0]);
+    filter = builder.mul_extension(lv.op.pc_push0, filter);
     let push_value = lv.mem_channels[NUM_GP_CHANNELS - 1].value;
     {
         let diff = builder.sub_extension(push_value[0], lv.program_counter);

evm/src/cpu/push0.rs

@@ -11,7 +11,8 @@ pub fn eval_packed<P: PackedField>(
     lv: &CpuColumnsView<P>,
     yield_constr: &mut ConstraintConsumer<P>,
 ) {
-    let filter = lv.op.push0;
+    // `PUSH0`'s opcode is odd, while `PC`'s opcode is even.
+    let filter = lv.op.pc_push0 * lv.opcode_bits[0];
     let push_value = lv.mem_channels[NUM_GP_CHANNELS - 1].value;
     for limb in push_value {
         yield_constr.constraint(filter * limb);
@@ -23,7 +24,8 @@ pub fn eval_ext_circuit<F: RichField + Extendable<D>, const D: usize>(
     lv: &CpuColumnsView<ExtensionTarget<D>>,
     yield_constr: &mut RecursiveConstraintConsumer<F, D>,
 ) {
-    let filter = lv.op.push0;
+    // `PUSH0`'s opcode is odd, while `PC`'s opcode is even.
+    let filter = builder.mul_extension(lv.op.pc_push0, lv.opcode_bits[0]);
     let push_value = lv.mem_channels[NUM_GP_CHANNELS - 1].value;
     for limb in push_value {
         let constr = builder.mul_extension(filter, limb);

evm/src/cpu/stack.rs

@@ -85,7 +85,7 @@ const STACK_BEHAVIORS: OpsColumnsView<Option<StackBehavior>> = OpsColumnsView {
         disable_other_channels: true,
     }),
     jumps: None, // Depends on whether it's a JUMP or a JUMPI.
-    pc: Some(StackBehavior {
+    pc_push0: Some(StackBehavior {
         num_pops: 0,
         pushes: true,
         disable_other_channels: true,
@@ -95,11 +95,6 @@ const STACK_BEHAVIORS: OpsColumnsView<Option<StackBehavior>> = OpsColumnsView {
         pushes: false,
         disable_other_channels: true,
     }),
-    push0: Some(StackBehavior {
-        num_pops: 0,
-        pushes: true,
-        disable_other_channels: true,
-    }),
     push: None, // TODO
     dup: None,
     swap: None,

evm/src/witness/transition.rs

@@ -154,7 +154,6 @@ fn decode(registers: RegistersState, opcode: u8) -> Result<Operation, ProgramErr
 fn fill_op_flag<F: Field>(op: Operation, row: &mut CpuColumnsView<F>) {
     let flags = &mut row.op;
     *match op {
-        Operation::Push(0) => &mut flags.push0,
         Operation::Push(1..) => &mut flags.push,
         Operation::Dup(_) => &mut flags.dup,
         Operation::Swap(_) => &mut flags.swap,
@@ -173,7 +172,7 @@ fn fill_op_flag<F: Field>(op: Operation, row: &mut CpuColumnsView<F>) {
         Operation::ProverInput => &mut flags.prover_input,
         Operation::Pop => &mut flags.pop,
         Operation::Jump | Operation::Jumpi => &mut flags.jumps,
-        Operation::Pc => &mut flags.pc,
+        Operation::Pc | Operation::Push(0) => &mut flags.pc_push0,
         Operation::Jumpdest => &mut flags.jumpdest,
         Operation::GetContext | Operation::SetContext => &mut flags.context_op,
         Operation::Mload32Bytes => &mut flags.mload_32bytes,