Copyright 2017-2022: Vedran Franke, Alexander Blume, Ricardo Wurmus. This work is distributed under the terms of the GNU General Public License, version 3 or later. It is free to use for all purposes.
PiGx ChIPseq (pipelines in genomics for Chromatin Immunoprecipitation Sequencing) is an analysis pipeline for preprocessing, peak calling and reporting for ChIP or ATAC sequencing experiments. It is easy to use and produces high quality reports. The inputs are reads files from the sequencing experiment, and a configuration file that describes the experiment. In addition to quality control of the experiment, the pipeline enables multiple peak calling analysis and allows the generation of a UCSC track hub in an easily configurable manner. Starting from versions >= 0.0.50 the pipeline allows to perform highly customizable differential analysis using DEDeq2 to detect genome regions with differences in occupancy between defined groups.
- Trim reads using trim-galore
- Quality control reads using fastQC and multiQC
- Map reads to genome using Bowtie2
- Call peaks for multiple combinations of samples using MACS2
- Control reproducibility of experiments using IDR
- Generate a UCSC track hub to view in Genome Browser
- NEW Highly customizable Differential Analysis
- QC reports
- bam files
- bigwig files
- narrowPeak files
- UCSC track hub folder
- NEW Differential Analysis Report
You can install this pipeline with all its dependencies using GNU Guix:
guix install pigx-chipseq
After exporting the guix profile to the PATH you should be able to get started.
You can also install it from source manually. You can find the latest release here. PiGx uses the GNU build system. Please make sure that all required dependencies are installed and then follow these steps after unpacking the latest release tarball:
./configure --prefix=/some/where
make installBy default the configure script expects tools to be in a directory
listed in the PATH environment variable. If the tools are installed
in a location that is not on the PATH you can tell the configure
script about them with variables. Run ./configure --help for a list
of all variables and options.
You can prepare a suitable environment with Conda or with GNU Guix. If you do not use one of these package managers, you will need to ensure that the following software is installed:
Software dependencies
- R
- argparser
- biocparallel
- biostrings
- chipseq
- data.table
- dyplr
- genomation
- genomicalignments
- genomicranges
- rsamtools
- rtracklayer
- rsubread
- s4vectors
- stringr
- jsonlite
- heatmaply
- htmlwidgets
- ggplot2
- ggrepel
- plotly
- rmarkdown
- ggrepel
- deseq2
- dt
- pheatmap
- corrplot
- reshape2
- scales
- crosstalk
- gprofiler2
- summarizedexperiment
- hexbin
- python
- snakemake
- pyyaml
- wrapper
- pytest
- xlrd
- magic
- pandoc
- fastqc
- multiqc
- trim-galore
- bowtie
- macs2
- idr
- samtools
- bedtools
- bedToBigBed
- bamToBed
Assuming you have Guix installed, the following command spawns a sub-shell in which all dependencies are available:
guix shellTo run PiGx on your experimental data, first enter the necessary parameters in the spreadsheet file (see following section), and then from the terminal type
$ pigx-chipseq [options] sample_sheet.csvTo see all available options type the --help option
$ pigx-chipseq --help
usage: pigx-chipseq [-h] [-v] -s SETTINGS [-c CONFIGFILE] [--target TARGET]
[-n] [--graph GRAPH] [--force] [--reason] [--unlock]
samplesheet
PiGx ChIPseq Pipeline.
PiGx ChIPseq is a data processing pipeline for ChIPseq read data.
positional arguments:
samplesheet The sample sheet containing sample data in yaml format.
optional arguments:
-h, --help show this help message and exit
-v, --version show program version number and exit
-s SETTINGS, --settings SETTINGS A YAML file for settings that deviate from the defaults.
-c CONFIGFILE, --configfile CONFIGFILE The config file used for calling the underlying snakemake process. By
default the file 'config.json' is dynamically created from the sample
sheet and the settings file.
--target TARGET Stop when the named target is completed instead of running the whole
pipeline. The default target is "final-report". Pass "--target=help"
to describe all available targets.
-n, --dry-run Only show what work would be performed. Do not actually run the
pipeline.
--graph GRAPH Output a graph in Graphviz dot format showing the relations between
rules of this pipeline. You must specify a graph file name such as
"graph.pdf".
--force Force the execution of rules, even though the outputs are considered
fresh.
--reason Print the reason why a rule is executed.
--unlock Recover after a snakemake crash.
This pipeline was developed by the Akalin group at MDC in Berlin in 2017-2018.The pipeline requires two files as input to specify the samples and the design of the analysis.
The samples used for any subsequent analysis are defined in the sample sheet section.
| SampleName | Read | Read2 |
|---|
- SampleName is the name for the sample
- Read/Read2 are the fastq file names of paired end reads
- the location of these files is specified in
settings.yaml - for single-end data, leave the Read2 column in place, but have it empty
- the location of these files is specified in
The sample sheet offers support for technical replicates, by repeating the sample name (first column) for different input files (second,third column). The quality check will be performed for any input file and replicates will be merged during the mapping.
| SampleName | Read | Read2 | Group (optional) |
|---|---|---|---|
| ChIPpe | ChIPpe_R1.fq.gz | ChIPpe_R2.fq.gz | Group1 |
| ChIPpe | ChIPpe_t2_R1.fq.gz | ChIPpe_t2_R2.fq.gz | Group2 |
The settings file is a file in yaml format specifying general settings and the details of the analysis. It has the following required sections:
Defines paths to be used in the pipeline, some of the items are required and some optional (can stay blank):
| item | required | description |
|---|---|---|
| input-dir | yes | directory of the input files (fastq files) |
| output-dir | yes | output directory for the pipeline |
| genome-file | yes | path to the reference genome in fasta forma |
| index-dir | no | directory containing pre-built mapping indices for the given reference genome (created with bowtie2-build) |
| gff-file | no | location of a GTF file with genome annotations for the given reference genome |
These are settings which apply to all analysis (unless adjusted in single analysis):
| item | required | description |
|---|---|---|
| assembly | yes | version of reference genome (e.g. hg19,mm9, ...) |
| spikein_name | no | version of spike-in genome (e.g. hg19,mm9, ...) |
| organism | no | needed for GO term analysis (e.g. hsapiens, mmusculus, dmelanogaster, celegans) |
| params | no | list of default parameters for tools and scripts (for tools check respective manual for available parameters) |
The execution section in the settings file allows the user to specify whether the pipeline is to be submitted to a cluster, or run locally, and the degree of parallelism. For a full list of possible parameters, see etc/settings.yaml.
A minimal settings file could look like this, but please consider that no analysis will be performed without adding analysis information :
locations:
input-dir: in/reads/
output-dir: out/
genome-file: genome/my_genome.fa
index-dir:
gff-file: genome/mm_chr19.gtf
general:
assembly: mm9
spikein_name: hg38
# The "organism" field is needed for GO term analysis. Leave it empty
# if not interested in GO analysis. Otherwise provide a string with
# the initial of genus and the species name (e.g. hsapiens, mmusculus,
# dmelanogaster, celegans)
organism: 'mmusculus'
params:
export_bigwig:
extend: 200
scale_bw: 'yes'
bowtie2:
N: 0
k: 1
idr:
idr-threshold: 0.1
macs2:
# g: mm
keep-dup: auto
q: 0.05
nomodel: ''
extract_signal:
expand_peak: 200
bin_num: 20
feature_counting:
minFragLength: 50
maxFragLength: 600
countChimericFragments: ''
requireBothEndsMapped: ''
execution:
submit-to-cluster: no
rules:
__default__:
queue: all.q
memory: 8G
bowtie2:
queue: all.q
memory: 16G
The analysis part of the setting file describes the experiment. It has following sections:
| section | required | description |
|---|---|---|
| peak_calling | yes | defines which samples will be used to detect regions of enriched binding ( multiple combinations and variations are possible, see here for details ) |
| idr | no | specifies pairs of peak calling analysis that are compared to determine the reproducibilty of the general experiment (see here for details) |
| hub | no | describes the general layout of a UCSC hub that can be created from the processed data and allows the visual inspection of results at a UCSC genome browser (see here for details) |
| feature_combination | no | defines for a list of peak calling and/or idr analysis the combination of regions shared among this list (see here for details) |
| differential_analysis | no | specifies for a list of groups defined in the sample sheet which samples are used as Case or Control in the Differential Analysis (see here for details) |
The creation of these sections is straight forward considering the following snippets as template. Comments and examples within the snippets provide guidance of what is possible and what to take care of.
The previously defined samples are used for subsequent peak calling analysis to detect regions of enriched binding. In this section any number of comparisons can be defined, while multiple combinations and variations are possible. In terms of peak calling the ChIP (also called treatment) is the sample in which we want to detect enriched regions compared to the Cont(rol) (or background) sample. Each analysis can be run with a unique set of parameters and default parameters for all analysis can be defined in the settings file , check available parameters and description here. For more information have a look at the publication for the software we are using "Zhang et al. Model-based Analysis of ChIP-Seq (MACS). Genome Biol (2008) vol. 9 (9) pp. R137".
# define peak calling analysis
peak_calling:
# analysis can have any name, but the names have to be unique
Peaks1:
# sample(s) to be used as treatment sample
ChIP: ChIP1
# sample(s) to be used as control sample
Cont: Cont1
params:
macs2:
# each analysis can be adjusted independently
# add/modify available parameters of the analysis
nomodel: ''
extsize: 300
Peaks2:
ChIP: ChIP2
Cont: Cont2
params:
macs2:
# each analysis can be adjusted independently
nomodel: ''
extsize: 147
Peaks4:
ChIP:
# multiple samples can be used as treatment
- ChIP1
- ChIP2
Cont:
# multiple samples can be used as control
- Cont1
- Cont2
params:
macs2:
nomodel: ''
Peaks5:
# the number of samples per group can differ
ChIP: ChIP2
Cont:
- Cont1
- Cont2
params:
macs2:
nomodel: ''
Peaks6:
# analysis can be performed without control
ChIP: ChIP1
Cont:
params:
macs2:
nomodel: ''Assuming that the some samples are (biological/technical) replicates, in order to measure the consistency between them use the irreproducible discovery rate (IDR) "Li, Q., Brown, J. B., Huang, H., & Bickel, P. J. (2011). Measuring reproducibility of high-throughput experiments. The annals of applied statistics, 5(3), 1752-1779.", which is in general a good (but very stringent) quality control.
idr:
# idr analysis can have any name, but the names have to be unique
ChIP_IDR:
# define the pair of samples, add more combinations for more replicates
# ChIP1 and ChIP2 are required labels, only adjust values of those
ChIP1: Peaks1
ChIP2: Peaks2In the hub section the general layout of a UCSC Track Hubs is described with some minimal items. The track hub is generated from the processed data and allows the visual inspection of results at a UCSC genome browser (for supported genomes).
The required items to define the hub are the following:
| item | example | description |
|---|---|---|
| name | PiGx_Hub | name of the hub directory |
| shortLabel | PiGx_Short | short name of hub is displayed as name above track groups |
| longLabel | PiGx_Hub_Long | descriptive longer label for hub is displayed as hub description |
| my.mail[at]domain.com | whom to contact for questions about the hub or data | |
| descriptionUrl | pigx_hub.html | URL to HTML page with a description of the hub's contents |
| super_tracks | see below | specification of hub layout (track groups, tracks) |
This is a small example how this could look like:
hub:
name: PiGx_Hub
shortLabel: PiGx_Short
longLabel: PiGx_Hub_Long
email: [email protected]
descriptionUrl: pigx_hub.html
super_tracks:
# track groups can have any name, but the names have to be unique
Tracks1:
# tracks can have any name, but the names have to be unique
track11:
# to add peaks as a track, define "type: macs"
name: Peaks1
type: macs
track12:
# to add coverage signal as a track, define "type: bigwig"
name: ChIP1
type: bigWig
# descriptive longer label for track group is
# displayed as description in track settings
long_label: Tracks1_longTo find the combination of enriched binding regions, which is shared among a set of peak calling and/or idr analysis results, define a feature in the feature_combination section. Only items defined in the peak_calling and idr sections can be used here.
feature_combination:
# features can have any name, but the names have to be unique
Feature1:
# define feature based on only one result
- ChIP_IDR
Feature2:
# define feature based on more than one result
- Peaks6
- Peaks5
Feature3:
# define feature based on different analysis types
- ChIP_IDR
- Peaks5To find genomic regions that are differentially bound by a certain chipped protein or that show differential open chomatin patterns, define a differential analysis to compare Case and Control samples, with optional covariates, using the DESeq2 framework ("Love, M.I., Huber, W. and Anders, S., 2014. Moderated estimation of fold change and dispersion for RNA-seq data with DESeq2. Genome biology, 15(12), p.550."). Optionally predefined peak calling and/or idr analysis resultscan be used to specify pre-called features that are combined to regions of interest, but by default a peak calling analysis containing all samples of the specifed groups is performed to create the consensus peaks defining the regions of interest. Each analysis can be run with a unique set of parameters for the peak calling and read summarization, however default parameters for all analysis can be defined in the general section of the settings file. Reads over features are counted using Rsubreads featureCount function, as this allows to finetune the summarization by multiple options explained in the package's manual, please see their publication for more details: "Liao, Y., Smyth, G.K. and Shi, W., 2019. The R package Rsubread is easier, faster, cheaper and better for alignment and quantification of RNA sequencing reads. Nucleic acids research, 47(8), pp.e47-e47.".
differential_analysis:
Analysis1:
Case:
- Group1
- Group2
Control:
- Group3
# comma separated list of additional co-variates to control for
# in differential expression analysis (e.g. batch, age,
# temperature, sequencing_technology etc.). Must correspond to a
# column field in the sample_sheet.csv file.)
Covariates: ''
Peakset: # choose peaks to define consensus peak set
- ChIP_IDR
- Peaks6
- Peaks5
params:
feature_counting:
minFragLength: 50
maxFragLength: 150
Analysis2:
Case:
- Group1
- Group2
Control:
- Group3
Peakset: # if no peaks given call joint peaks for given samples
Analysis3:
Case:
- Group1
- Group2
Control: Group3
params:
macs2:
nomodel: ''
extsize: 147|-- Analysis
|-- Annotation
|-- BigWig
|-- Bowtie2_Index
|-- FastQC
|-- Log
|-- Mapped
|-- Peaks
|-- Reports
|-- Trimmed
|-- UCSC_HUB
Contains RDS files with intermediary analysis steps. RDS are binary files which efficiently store R objects.
Formatted GTF annotation.
Symbolic links to the bigWig signal files.
Processed genme file along with the Bowtie2_Index
FastQC sequencing quality report
Detailed output from execution of each step of the pipeline.
Mapped reads in .bam format, and corresponding bigWig files.
Peaks called with MACS2. Depending on the parameters, contains either narrowPeak or broadPeak format. sample_qsort.bed contains uniformly processed peaks, sorted by their corresponding p value.
Contains MultiQC and ChIP quality reports in html format. Optionally contains folders with Results of Differential Analysis wth DESeq2 and featureCounts tables in CSV and Reports in html format.
Trimgalore adaptor and quality trimmed files.
Contains a completely formatted UCSC hub, with track descriptions, peaks and bigWig tracks.
If are interested in the general workflow of the pipeline and want to learn more about PiGx make sure you check:
- the docs at https://bioinformatics.mdc-berlin.de/pigx_docs/pigx-chip-seq.html#pigx-chip-seq
- our other pipelines at https://bioinformatics.mdc-berlin.de/pigx/
If you use the pipeline in published research, please cite our publication:
Wurmus, R., Uyar, B., Osberg, B., Franke, V., Gosdschan, A., Wreczycka, K., Ronen, J., Akalin, A. (2018). PiGx: Reproducible genomics analysis pipelines with GNU Guix. GigaScience. https://doi.org/10.1093/gigascience/giy123
If you have further questions please e-mail: [email protected] or use the web form to ask questions https://groups.google.com/forum/#!forum/pigx/