Skip to content

Latest commit

 

History

History
44 lines (30 loc) · 2.06 KB

Draft_Snap_Near.md

File metadata and controls

44 lines (30 loc) · 2.06 KB
Raw

Draft Snap Near

Description

The Draft Snap Near option snaps to the nearest point on faces or edges. The faces and edges can belong to Draft or Arch objects but also to objects created with other workbenches.


Snapping the second point of a line to the nearest point on an edge

Usage

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Near is not active do one of the following:
    • Press the button in the Draft Snap toolbar.
    • Press the button in the Draft snap widget and in the menu select the Snap Near option.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the cursor over a face or edge.
  6. The face or edge is highlighted.
  7. If a nearest point is found the point is marked.
  8. Optionally move the cursor along the face or edge to select a different nearest point.
  9. Click to confirm the point.

Notes

  • It is not a good idea to have Draft Snap Near permanently active as it takes precedence over many other snap options.

Preferences

See Draft Snap.

documentation index > Draft > Draft Snap Near