Error in user YAML: (<unknown>): did not find expected alphabetic or numeric character while scanning an alias at line 5 column 14
---
GuiCommand:
Name: Sketcher RectangularArray
MenuLocation: Sketch , Sketcher tools , Rectangular array
Workbenches: Sketcher_Workbench
Shortcut: **Z** **A**
Version: 0.16
---
Creates an array of selected sketcher elements.
- Select sketcher elements in task panel or in 3D view.
- There are several ways to invoke the command:
- Press the [ Rectangular array button.
- Select the Sketch → Sketcher tools → [ Rectangular array option from the menu.
- Specify the options for the array in the dialog that opens.
- Press the OK button.
- Move the mouse in the 3D view towards the desired reference point.By keeping Ctrl pressed, the angle to the reference point can be fixed in steps of 5°. (v0.20)
- Left-click in the 3D view to create the array.
- To set the distances between the array elements, edit the dimensional constraints of the array.
Rectangular array has the following options:
- Colums: The number of columns for the array.
- Rows: The number of rows for the array.
- Equal vertical/horizontal spacing: If the vertical distance between the array elements should be the same as the horizontal distance.
- Constrain inter-element separation: When this is checked, the distance between the array elements will be constrained.If you for example only know that you need a 23 x 15 mm array, use this option to later be able to change these constraints to the dimensions you need.
- Clone: If selected, dimensional constraints are replaced by geometric constraints in the copies, so that any change in the original element is also reflected in the copies.
{{Sketcher_Tools_navi}}
⏵ documentation index > Sketcher > Sketcher RectangularArray