-
FEATURES
- written in C; small and fast
- two operation modes:
- server via inetd/xinetd
- script/interactive via command line arguments
- supports IPv6 and IPv4
- pidentd option compatibility
- easy to use openssl compatible strong symmetric encryption
- many privacy and anonymizing options
- works well even with broken clients
- internationalized log and help messages
- free software licensed under the GPL. This program is released under the GPL with the additional exemption that compiling, linking, and/or using OpenSSL is allowed.
-
REQUIREMENTS & SETUP
-
Building
Although authd was built and tested on Red Hat Linux 9, Red Hat Enterprise Linux and Fedora Core 1 & 2, it will probably compile on any recent 2003/2004-era GNU/Linux distro with openssl and recent versions of the GNU tool chain (compiler + make) and GNU C library.authd does not require autoconf. If needed, change any defaults by editing the config.h file. To build, simply run "make"
-
Installing
"make install" will install "in.authd" and any translations in "/usr/local/sbin" and "/usr/local/locale" respectively, so you'll need to set the make variable prefix if you want the files to go somewhere else than "/usr/local". It will install as the filename "in.authd" to reflect that it is intended to run as a inetd/xinetd hosted server; in other words, server input/output is connected to stdin and stdout.If you're using encryption, put a one line pass phrase in the file "/etc/ident.key" (or another place if you change the default location via a server option), making sure the file is readable by the authd process and NOT readable/writable by others ("chmod o-rw"). If the permissions are not set correctly, authd will refuse to encrypt.
-
Running
authd should be able to read /proc/net/tcp and/or /proc/net/tcp6 to actually match users to ports-- although it will run without these files.A sample xinetd configuration file has been provided; copying xinetd.conf.auth to /etc/xinetd.d should work for Red Hat distributions. Be sure to make any changes needed to the default values and path as needed then restart/reload the xinetd daemon to use it.
All of the options available can be seen with the "-h" option. Some notes on some of the less obvious options and parameters:
-
--abrupt
If an error occurs after the client has sent the port pair, just drop the connection rather than tell the client (allowed by RFC 1413). authd may do this anyway for certain errors that prevent it from sending a reply (I/O error or an out of memory situation). "--abrupt" overrides "-e" and "--xerror". -
-E[cipher]
Any symmetric block/stream encryption method supported by the installed openssl can be used as a parameter. To see a list of available ciphers, use "openssl enc -h" -
-l[mask]
An optional base 10, base 8 (prefix with "0"), or base 16 (prefix with "0x") bit mask of system log priority levels that you wish to log. For example, an mask of 178 ("-l017") only logs messages of priority error or higher. -
--fn[=uint]
Sends the full-name/"finger" info rather than the username. Some systems contain additional fields of information after the full name of a person, such as the office, office phone number and home phone, separated by commas. To display only the first field, specify "1". To specify up to two fields, specify "2"... and so on.If the "-n" option is also specified, then the numeric user id will be followed by the 2nd up to uint fields providing that uint is greater than two.
-
--hybrid
Only applies to IPv6 addresses activated with the "--verbose" option. When used, the bottom 32 bits of the address with be displayed in the traditional IPv4 format of four dot separated base 10 numbers rather than the IPv6 style of eight 16-bit colon separated hex pairs. -
--mapped=ipv6
Allows IPv6 addresses whose first 96 bits (in other words, everything except for the last 32 bits) are ipv6 to match IPv4 addresses which are identical to the bottom 32-bits of the IPv6 address. Useful for IPv6/IPv4 multi-interface environments where IPv4 addresses on different interfaces are mapped to IPv6 addresses. It does not match IPv4 "localhost" (127.0.0.1) with IPv6's equivalent (::1). -
--os[=rfc1340]
Without an argument, it will display the same value returned by the "uname" command as the operating system, rather than "UNIX". You may wish to do this if the username returned (perhaps from pam talking to a Windows server) does not make sense within a traditional UNIX or Linux system. -
--resolve
Only applies to addresses and ports activated with the "--verbose" option. Causes in.authd to resolve addresses using nameservers, and replace service port numbers with their names, when available. Resolving addresses slows the server down. -
--username[=login]
Causes authd to report the username login for all valid established tcp connections, regardless of the actual user. login must point to a valid entry in the password database. If used in conjunction with "-n", the uid of the login will be returned. It will not change the uid number provided with the "--verbose" option. "--username" is useful for providing the actual user on single user workstations or servers that have changed their original associated uids to effective ones. It is also useful for masking the true username for privacy purposes (in this case authd is running as a dummy placebo server). -
--verbose
Adds the following information after the username or full name (depending on the option selected), separated by commas:- true userid number
Different from "-n" which is affected by "--username". - time stamp
Date and time is provided in ASCII ISO 8601 UTC/Zulu (aka Greenwich Median, or GMT) time. The day of week and time in the authd's local timezone using the locale's format and encoding are also provided in parentheses. - local address and port
Port is separated from the address by a vertical bar, "local" is from the perspective of the authd server. - remote address and port
Port is separated from the address by a vertical bar, "remote" is from the perspective of the authd server.The authd daemon will not read any input from stdin if port pairs are specified as parameters. Also, only the first port pair will be processed unless the "-m" option is specified.
- true userid number
-
-
Testing
-
Run "netstat -A inet -n" and find an established tcp connection.
-
Input the two ports prefixed with colons as single command line argument (no whitespace unless the entire pair is enclosed in quotes for the command line parser), in the same order, separated by a comma. Example:
$ /usr/sbin/in.inetd 33201,6667
-
Execute "telnet localhost auth" and type the two ports separated by a comma. The two ports selected must have a foreign address of localhost, or 127.0.0.1 as well as a matching local address. If they do not, a NO-USER error will be returned.
-
-
-
DIFFERENCES FROM PIDENTD 3.0.18
-
no config file
There is no "/etc/ident.conf", as all the options you need for a simple inet super daemon based server can be easily passed from the command line -
no special crypto tools
Key generation requires no special tools; a plain text pass phrase in a file is all that's required to encrypt. To decrypt, the openssl enc tool is used. -
no standalone server mode
For a simple server, launching via the ubiquitous inetd/xinetd is all that's needed. The super server provides most of the options present in pidentd. -
no protocol extensions
The VERSION and QUIT commands are unnecessary, a security risk in the case of VERSION, and a violation of RFC 1413 protocol. As they are not used by any client, they have been intentionally omitted. The "-e" option is instead used to mask error messages. -
no automatic verbose encryption
Encrypting replies does not automatically include port and time information, which makes the reply excessively long. This information may be included with the "--verbose" option.
-
-
HOW TO INCREASE PRIVACY
-
You can allow users to either opt-out or opt-in from exposing their userid creating a file in their home directory (defaults are "
/.noident" and "/.ident" respectively) and by setting the appropriate server option ("-N" or "--ident"). If both options are set then "/.noident" will cancel out a "/.ident" if both are present. If a file is present (or not present) which indicates that the user does not wish his information to be revealed, a HIDDER-USER error message is returned. -
If you just want an ident server to speed up broken servers that insist on some form of ident but you don't want to reveal any usernames, you can make authd "lie" to clients and tell them that the ports are owned by any arbitrary user with the "--username" option. When set to its default, the authd daemon will reply with either NO-USER errors or "nobody" as the port owner. Note that the argument supplied to "--username" must be a valid username. As some daemons do run as "nobody", you may wish to create a special username just for authd, such as "somebody", using the command:
$ /usr/sbin/useradd -s /sbin/nologin -r somebody
-
Encryption allows the system administrator owning the authd server to be aware of any ident information that is sent to him from remote sites while not unnecessarily exposing the usernames to any anonymous system.
-
The "-e" option can be used to return UNKNOWN-ERROR instead of INVALID-PORT, NO-USER, and HIDDEN-USER.
-
-
HOW TO USE ENCRYPTION
-
put a plain text password or pass phrase that is terminated by a newline in the file "/etc/ident.key". Any additional data after the newline is ignored. If the pass phrase is in a different file and/or location, use the "--passwd" option to tell authd where it is.
-
Make sure the owner/group and permissions are set so that the daemon (which usually runs as "nobody" if you use the default xinetd configuration file) can read it. Make sure that other can't read or write to it by using:
$ chmod o-rw /etc/ident.key
authd will refuse to encrypt if this is not done.
-
To decrypt the string, the "openssl" tool (using the "enc" sub-tool) is needed. If the base64 encrypted string is longer than 64 characters, it will need to be broken into multiple lines of 64 characters or less (why? because openssl enc -base64 doesn't like it any other way-- even though base64 only needs line breaks for e-mail). Feed the short base64 string into the command:
$ /usr/bin/openssl enc -d -base64 -aes-128-cbc -pass file:/etc/ident.key
(Change the cipher to what's appropriate if you did not use the default for the "-E" authd option or the default was changed in config.h) Use enc's -in option if the base64 encryption is stored in a file rather than being piped into stdin)
-
Do understand the security ramifications of storing a password/pass phrase in unencrypted form on a file system. A system is secure if the cost of breaking the system is greater than the value of the data. Thus, do not increase the value of the authd password by using it anywhere else-- it should only be used to encrypt usernames & userids and address/port info returned by "--verbose" -- (relatively low value information already readable by any local user)
-
-
INTERNATIONALIZATION
-
Sometimes, the username and/or gecos field returned by the system may not be in ASCII. An example would be a system that authenticates against accounts stored on Windows. Windows permits non-ASCII in their usernames and Name/Comment descriptions. In these cases, use the "--codeset" option to specify the character encoding/charset used. This will not convert any messages; it will simply inform the client as to the character encoding. The character encoding will not be sent to the client if the response appears to be all ASCII (all printable characters; no control characters), even if the option is specified.
-
in the rare case that the string to be sent is not ASCII, a --codeset has been specified without the optional parameter, and the program is unable to determine the codeset used by the operating system, "X-UNKNOWN" will be returned as the codeset.
-
You may want error messages (also local timestamps with the --verbose option) to be sent in a different locale from the current locale (inetd/xinetd often is configured to launch daemons in the "C" locale). The locale to use can be configured with the "--lang" option. By default, the daemon starts in the locale of the parent (usually xinetd/inetd) that launched it. If --codeset is also specified, it overrides the character encoding of the specified locale.
Be aware that many system log daemons are not capable of handling non-ASCII yet, so combining this with the "-l" option may not produce readable syslog messages.
-
-
EXTENDED ERROR MESSAGES
These only appear when authd is launched with the "--xerror" option, because some server administrators do not believe in giving outsiders any useful information regarding the state of their servers. However, the --xerror is useful for diagnostics and troubleshooting.
-
X-PROC
either /proc/net/tcp or /proc/net/tcp6 was not in the format that authd expected it to be in. This may be because:- the files are not part of a true linux /proc filesystem
- you are running a modified or experimental kernel
- you are running a kernel much newer than this program's last update and the file format has changed
- the proc file macros in config.h have been changed to point to something else
-
X-NAME
A username was specified as an argument, but the username couldn't be found in the password database (/etc/passwd, NIS, or whatever the system uses). -
X-UID
The UID taken from /proc/net/tcp6 or /proc/net/tcp couldn't be found in the password database. -
X-FILE
The pathname for the .ident or .noident file (home directory path + filename) was excessively long or bogus. -
X-CRYPTO
Suffixed by zero or more sequences of dashes and eight digit hexadecimal numbers. Either the pass phrase file couldn't be opened (wrong filename, doesn't exist, wrong permissions (must be readable by authd and NOT readable/writable by "others"), the pass phrase was too short for the given encryption, the crypto algorithm was inappropriate for the type of data (for example, not symmetric or does not permit non-fixed lengths), or some other internal (usually memory resource related) condition. -
X-ERRNO
Suffixed with a dash and a decimal number corresponding to what was returned by errno. Usually will occur due to an I/O error or an out-of-memory condition. On Linux, 2 is a "file not found" and 12 is an out of memory condition. Note that some out of memory conditions will cause the server to exit before printing a message. -
X-RFC1413
The userid reply was longer than 512 characters and/or contained CRLF. While this shouldn't happen with sane data, this could possibly occur if an exceptionally long/strange gecos field and the combination of "--verbose" and "--fn".
-
-
Notifications
You must be signed in to change notification settings - Fork 3
License
Unknown, Unknown licenses found
Licenses found
Unknown
COPYING
Unknown
COPYING.license
InfrastructureServices/authd
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
About
No description, website, or topics provided.
Resources
License
Unknown, Unknown licenses found
Licenses found
Unknown
COPYING
Unknown
COPYING.license
Stars
Watchers
Forks
Packages 0
No packages published