Platform for measuring and collecting data on a bicycle. Currently, we measure the distance with either HC-SR04 or JSN-SR04T ultrasonic sensors connected to an ESP32.
Inspired by the Berlin project Radmesser. This version uses a simple push button at the handle bar to confirm distance-measures were actually overtaking vehicles. It has its own GPS, and a SD card for logging, so it does not require any additional hardware (like a smartphone).
Starting with version v0.3 the firmware also exposes the measured data via BLE bluetooth. You can use this to feed data to the SimRa App or any other app collecting heart-rate BLE data.
There are various ways to flash the ESP, if you are an expert feel free to choose whatever way you want. The official way to install the firmware is via a browser. To do this open https://install.openbikesensor.org/ with either your Chrome or Edge browser and follow up from there. A more none technical documentation can be found at https://www.openbikesensor.org/docs/firmware/. The old technical documentation with different variants in the former documentation on github.
For a more none technical description of the process switch to https://www.openbikesensor.org/docs/firmware/.
Updating to 0.14.x will require you to download the latest release
firmware.bin and flash it using the file upload section in
the firmware update screen.
The reason for this is that Github changed their SSL Certificate Root and the old Firmware did not trust the new certicate. Once you are at 0.14.x, updates will work as usual again.
-
Check if the Flash App is already installed. Go to Update Flash App if no, or an outdated version is installed, push Update to vX.Y.ZZZ. The latest version of the "Flash App" gets then installed directly from GitHub, and you are redirected to the Update firmware page. You might need to look twice - the Update firmware page looks similar to the Update Flash App page.
-
On Update Firmware push "Update to vX.Y.ZZZ". The version is downloaded directly to your OBS device from GitHub. After the Download the device reboots and does some housekeeping so be patient within one or two minutes the device boots up with the new version.
The update mechanism consists of 2 parts. A small firmware called Flash App is used to read the new firmware from the SD card and flash it to the obs.
So as a 1st step you need to make sure that the Flash App part is installed
on you ESP, you can do so by using "Update Flash App" button and start the
update b pressing "Update to vX.Y.ZZZ". The data is directly downloaded from
GitHub, so the ESP needs to have access to the internet via your WiFi. You
can also download the flash.bin directly from the
GitHub releases
page. The direct update from GitHub has currently no progress bar so be
patient.
Now you need to download the OBS Firmware and place it as /sdflash/app.bin
on the SD Card. This is also fully automated behind the "Update Firmware"
button, There you can again directly download the latest version and start
the internal update process with the "Update to vX.Y.ZZZ" button. Make sure
it is a version newer v0.6.x. At the time of writing there is no such version
released yet. Do not downgrade to a version prior v0.6.x, once the Flash App
was installed. A hint on the "Update Firmware" page will show the version of
the Flash App you have installed or if the Flash App is not installed hint
you to install the Flash App 1st. With the "File Upload" option you can
also update to locally built versions. Make sure they are pos v0.6 versions!
The 1st update includes a repartitioning of the ESPs flash where you
do not see any indication of progress. Be patient all does not take more
than one or two minutes after the upload was completed.
The About page gives you some insight of the current partitioning a more detailed documentation will come.
Updates from older versions are described in the former documentation on github and on https://www.openbikesensor.org/docs/firmware/. Consider making a backup and start with a fresh installation.
You can find the OpenBikeSensor documentation under:
- You need a OpenBikeSensor in order to try work on the Firmware. Head over to our Hardware Guide to assemble one.
- Clone this repo:
git clone https://github.com/openbikesensor/OpenBikeSensorFirmware.gitandcdinto it. - Choose between developing with recommended VSCode, or CLion (license required), respectively Arduino IDE (discouraged).
- Happy Coding! 🎉 We are open for your pull request.
Copyright (C) 2020-2021 OpenBikeSensor Contributors
Contact: https://openbikesensor.org
This file is part of the OpenBikeSensor firmware.
The OpenBikeSensor firmware is free software: you can
redistribute it and/or modify it under the terms of the GNU Lesser General
Public License as published by the Free Software Foundation, either version
3 of the License, or (at your option) any later version.
The OpenBikeSensor Website and Documentation is distributed in the hope
that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License
along with the OpenBikeSensor Website and Documentation. If not, see
<http://www.gnu.org/licenses/>.
JetBrains supports the development with one license for their IDEs.