You may also check out the pull request on the official WLED repository that (should) do the same as my fork!

Aircoookie/WLED#1873

---

Modification info:

This is a WLED Mod to fit DIY Machine's shelf. VIDEO
But since i added more customization features, it is not limited to his project alone.

i added an effect called "Clock" that displays the current time on the shelf.
Color 1 controls the minutes,
Color 2 controls the hours,
Color 3 controls the downlights.
Colorpalettes are supported, but won't affect the downlights.

Customization:

Change "uint8_t ledsPerSegment = 9;" in FX.cpp (line 3740).
If you have built it just like in DIY Machine's video, you will have 207 LEDs for the clock and 12 LEDs for the downlights.

24h or 12h format is based on the wled time settings. Use checkbox "use 24h format" to switch between formats.

If you want to use the colon between hours and minutes, (un-)comment "#define USE_COLON_SEPARATOR" in line 3732.
The colon led count per dot is set in line 3757.
You can change the colon color as a hex-colorcode in line 3758 ( 0xFFFFFF for example )

---

Welcome to my project WLED! ✨

A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!

⚙️ Features

• WS2812FX library integrated for over 100 special effects
• FastLED noise effects and 50 palettes
• Modern UI with color, effect and segment controls
• Segments to set different effects and colors to parts of the LEDs
• Settings page - configuration over network
• Access Point and station mode - automatic failsafe AP
• Up to 10 LED outputs per instance
• Support for RGBW strips
• Up to 250 user presets to save and load colors/effects easily, supports cycling through them.
• Presets can be used to automatically execute API calls
• Nightlight function (gradually dims down)
• Full OTA software updatability (HTTP + ArduinoOTA), password protectable
• Configurable analog clock + support for the Cronixie kit by Diamex
• Configurable Auto Brightness limit for safer operation
• Filesystem-based config for easier backup of presets and settings

💡 Supported light control interfaces

• WLED app for Android and iOS
• JSON and HTTP request APIs
• MQTT
• Blynk IoT
• E1.31, Art-Net, DDP and TPM2.net
• Hyperion
• UDP realtime
• Alexa voice control (including dimming and color)
• Sync to Philips hue lights
• Adalight (PC ambilight via serial) and TPM2
• Sync color of multiple WLED devices (UDP notifier)
• Infrared remotes (24-key RGB, receiver required)
• Simple timers/schedules (time from NTP, timezones/DST supported)

📲 Quick start guide and documentation

See the wiki!

On this page you can find excellent tutorials made by the community and helpful tools to help you get your new lamp up and running!

🖼️ Images

💾 Compatible LED Strips

Type	Voltage	Comments
WS2812B	5v
WS2813	5v
SK6812	5v	RGBW
APA102	5v	C/D
WS2801	5v	C/D
LPD8806	5v	C/D
TM1814	12v	RGBW
WS2811	12v	3-LED segments
WS2815	12v
GS8208	12v
Analog/non-addressable	any	Requires additional circuitry

🧊 Compatible PC RGB Fans and ARGB accessories

Brand	Model	Comments
Corsair	HD120 Fan	Uses WS2812B, data-in only
PCCOOLER	Moonlight 5-pack Fans	Uses WS2812B, includes Data-out connector to keep each fan uniquely addressable if wired in series like traditional LED strips
Any	5v 3-pin ARGB for PC	Any PC RGB device that supports the 5v 3-pin ARGB motherboard header should work fine with WLED. All the major motherboard vendors support the Corsair HD120 and PCCOOLER fans listed, so we can safely assume any device that supports motherboard ARGB 5V 3-Pin standard will work with WLED.

✌️ Other

Licensed under the MIT license
Credits here!

Uses Linearicons by Perxis!

Join the Discord server to discuss everything about WLED!

Check out the WLED Discourse forum!
You can also send me mails to [email protected], but please only do so if you want to talk to me privately.
If WLED really brightens up your every day, you can

Disclaimer:
If you are sensitive to photosensitive epilepsy it is not recommended that you use this software.
In case you still want to try, don't use strobe, lighting or noise modes or high effect speed settings. As per the MIT license, I assume no liability for any damage to you or any other person or equipment.