-
Notifications
You must be signed in to change notification settings - Fork 3
BOM
To get started, print the STLs in the folder that you need per the below table.
S3l3ctor is an open source filament selector under development. Development is being led by ThatMattGuy (Matt) in collaboration with other community members.
At this point the project is undergoing closed alpha testing and will have an open beta starting soonTM
Link the the Github STLs (Please please please don't click unless you know what you are doing)
I am not affiliated with the below links and likely have not tested them. Use at your own risk until there's a real BOM out.
Printed Parts:
| STL Name | Quantity |
|---|---|
| Main body parts | |
| MainBodyV2.2 | 1 |
| barrelidlerholder_v2.STL | 1 |
| barrelMotorholder_v2 .STL | 1 |
| Prusa-Frame-Clip-Mount | 2 |
| RetainerV2.STL | 2 |
| Tumbler parts | |
| tumbler-v64-maleEnd | 1 |
| tumbler-v64-motorEnd | 1 |
| tumbler-v69-pin | 6 |
| tumbler-v9-main-supports | 6 |
| Extruder end parts | |
| MushroomSplitter | 1 |
| For Skelestruder People: | |
| PC4-m10_SKELESTRUDER_B1.stl | 1 |
Hardware needed:
| Item | Quantity | Example link |
|---|---|---|
| Bolts | (how many? What size?) | Soon^tm |
| Square nuts | 2 | Spares bag |
| 608 bearings | 8 | ebay |
| Mk8 Gears | 6 | Amazon |
| Pc4-M10 fittings, pass through or drill them out | 7 | soon^tm |
| PTFE tubing ID 2mm OD 4mm | couple meters | ebay |
Electronics:
| Item | Quantity | Notes and URL |
|---|---|---|
| RAMPS + 5x A4988 drivers + Mega kit | 1 | ebay link - TODO find a better kit link |
| POWER OPTIONS | ||
| 12v 2 amp power brick | 1 | If you want to externally power S3l3ctor - Example brick - TODO find a better example |
| 12v 2 amp buck converter | 1 | OPTIONAL - For those who want to run off a 24v PSU. Make sure you have enough PSU headroom! Example - TODO verify links |
| If you have a 12v PSU and want to power off the PSU | You're fine, nothing needed here :D | |
| Microswitch with bearings | 9 | Something like this |
For a RAMPS setup: Set of RAMPS plus at least 2x A4988s (usually 5x) plus Mega Either a 12v brick (2 or more amps) or 24v to 12v buck regulator off of printer PSU 2x NEMA 17s 7-8x microswitches with bearings
Assembly: Pictures when my phone's not stupid